Humber keels and sloops

Humber keels racing

Humber sloops racing

Correction! I’ve received the following message from Dave Everatt of the Humber Keel and Sloop Preservation Society.

‘Gavin: To correct an error on my part, the photo I sent labelled Keel race was in fact not a race at all. Keel races were mainly in the 19th century and photos are rare and usually of very poor quality. When keels were racing they would usually set both mainsail and topsail and, because it was a special event, would also fly a burgee with the vessel’s name on it. The photo I sent you shows a group of keels heading down the Humber after ‘bunkering’ trawlers (that is, loading them with coal) in St Andrews Dock. They would be heading for the eastern docks, such as Alexandra Dock, to load a return cargo for the Aire & Calder or Sheffield &South Yorkshire Navigation. I have attached a further photo [pasted below – Ed] probably taken at the same time. Regards Dave’

Keels at Hull

I’m very pleased to be able to share these striking shots of Humber keels (top) and Humber sloops, thanks to Dave Everatt of the Humber Keel and Humber Sloop Society.

Taken in about 1900, the upper image in particular is a powerful reminder that many of us who come from the Eastern side of the UK are at least partly descended from the Vikings – and that there’s lots of genetic material to prove it.

The lower photo dates from the 1920s. In each case, click on the image for a much larger and clearer photo.

The society is currently celebrating its new website, so please check it out: www.keelsandsloops.org.uk. You’ll find that it cares for both a Humber keel and a Humber sloop, named Comrade and Amy Howson respectively.

While we’re on the subject, Youtube has a nice clip of the Humber sloop Spider T racing down the estuary on the tide.

PS – In the comments below Jim from Zanzibar asks about the paddle steamer in the lower photo. Here’s what HKHSS’s Dave Everatt has to say:

‘I cannot be 100 per cent sure but I believe the paddle steamer is the PS Humber. If so this is the information I could find on the vessel.

‘Of 131 tons, she was built by J T Eltringham & Co, South Shields 1895, and her propulsion was a paddle  driven by single cylinder engine by Hepple & Co of South Shields. Her tonnage was 131

‘She was owned by J Turner and operated from 1895.

‘She was built as a tug for use on the River Tyne and was converted for pleasure work after her tug career. She was iron-built, 100ft long, with a breadth of 19ft and a draught of 9ft. PS Humber made trips from Grimsby to Spurn, where she would land passengers by local rowing boats.

‘Regards

‘Dave Everatt’

Steel-hulled schooner for sale, lying at Standard Quay, Faversham

Schooner for sale

Schooner for sale

A pal and I dropped by Standard Quay at Faversham to see if we could spot a little lugger that we’d heard a friend is considering buying, so I took the opportunity to bag some photos of how things are there now. I’m sorry if you feel they’re not up to my usual standard – on arrival I discovered the battery of my usual camera was flat and so had to use my mobile phone, which seems to produce quite blue-grey images. I must get a spare.

Anyway, if you’re in the market for a steel-hulled schooner liveaboard, the one currently for sale at Standard Quay may be just what you’re looking for. It looked in pretty good shape to us, though neither of us has ever seen it sailing. The schooner’s pictured above.

Lady of the Lea Thames sailing barge Lady of the Lea Thames sailing barge Cambria being renovated

Roxane at Faversham Thames sailing barge Cambria being renovated

On a more cheerful note, the first two shots above are of the lovely small Thames sailing barge Lady of the Lea, two shots of Bob Roberts’ old sailing barge Cambria in restoration and a nice little Roxane that lives on the creek here.

And below is the bow of another Thames sailing barge Lady Daphne, here in a dry dock being repaired after a racing accident (I believe) and the yuppie flats that have already encroached the area opposite Standard Quay. The blue banner reads ‘Save Standard Quay’. For more on the Standard Quay campaign, click here.

Lady Daphne, Save Standard Quay banner

Lady Daphne, Save Standard Quay banner

Water Craft’s whacky Cordless Canoe Challenge races at the Beale Park Boat Show

Water Craft Cordless Canoe Challenge

A potential entry for the Water Craft CCC – very much in the spirit of the event, but the drag of that parasol may not help

Water Craft magazine has fired the starting gun on what promises to be a highly entertaining new competition for the Beale Park Boat Show, which in 2011 takes place from the 10-12th June.

The journal’s annual Amateur Boatbuilding Awards contest is well established and one of the highlights of the Beale Park show each year – but the new competition promises to be completely daft.

Inspired by a suggestion from Beale Park marketing manager Donna Hatchett, Water Craft editor Pete Greenfield has announced the Cordless Canoe Challenge, in which entrants have to use a cordless power tool to power a canoe around a short course on the lake at Beale. He has the support of power tool manufacturers Makita and the Electric Boat Association.

The boats do not have to be home-built, but can be of course, and they may be made of any material and can be modified any way entrants choose.

The only rules are that they mustn’t be longer than 16ft 3in (5m) including steering and stern gear, and have to be propelled solely by one or more cordless electric tools. A drill driving a prop shaft is one possibility, or perhaps a Thai-style long-tail rig sort-of, kind-of arrangement?

Pete suggests a jigsaw could be used to drive waggling flippers, or that an angle grinder might be fitted with a fan.

I’d suggest one of my Cinderella canoes powered by a steerable rack of, say, four cordless drills fitted with shafts attached to model aircraft propellers handing over the stern and controlled via a long tiller. But that might not be in keeping with Water Craft’s rather more sportsmanlike idea, which is that the power tools used should be things entrants already have in their workshops…

The racing will be in the form of a knockout tournament between pairs of boats drawn by lot, and will take place over the course of the Saturday and Sunday of the show. The course will likely be an out-and-back dogleg around two buoys, with some hopefully exciting action around the turning mark right in front of the beer tent (I’ll be watching, at least some of the time).

Entrants will need to slow their boat for this (if they reach any speed at all) and will likely need some kind of proper steering system.

Curiously, editor Pete also suggests the draft of entering craft should be modest, which presumably means judges will disqualify submarines. So, dear readers thinking of entering this malarkey, I’m afraid you can’t go underwater and will be stuck with wave-making resistance.

Boats invited to enter the cordless challenge will be checked for safety (you’ll doubtless need a bouyancy aid) – and crews for sanity – by Electric Boat Association stewards before being allowed to compete.

I should mention the prize to be awarded to the winning boat – a bag of Makita’s cordless power tools including a jigsaw, sander, planer, two drills and a site radio valued at over £1200!

Entrants should take a photo of their entry boat, preferably under way, and send it to Water Craft by the 1st May. More information about the comp will appear in the January/February issue of the magazine, which should appear in shops and fall through letterboxes on the 16th December.

I think it’s all going to be very amusing and, for the winner, rather profitable…

beale park cordless canoe challenge course

The Cordless Canoe Challenge course. If you know Beale Park, you’ll realise how short this is – turning ability will be as important as raw speed