Category: Techniques

The boatbuilding bug bites another victim

[ad name=”intheboatshed-post”]

Ed’s 10ft Maine Skiff, built from plans and instructions
supplied by Duck Trap Woodworking

Ed Engarto in New York State is one of the many people who build a boat, only to discover that it can be a life-changing experience.

This seems to happen a lot. I know there’s a lot of satisfaction to be gained from building even the smallest boat and then using your creation on the water, but I think there’s more to this phenomenon: perhaps it’s the fact of slowly over time creating a tangible object, the quality of which the maker can judge and come to terms with as they proceed, perhaps it’s the discovery that, after all, one can learn new skills and complete a new category of projects, or maybe it’s the result of all those quiet hours the boatbuilder spends working alone in quiet contemplation.

Ed seems to me to be a typical convert to amatuer boatbuilding. I hope he enjoys his second project as much as he did his first.

He writes:

‘I built this little ten foot, lapstrake row boat over a period of three plus years, ending in July of 2008. The design comes from Duck Trap Woodworking and is known to those fine folks as their Maine Skiff. I started out journaling every working session and before the molds were even finished, the entries began to touch on life experiences, the trials of a large project, the virtue of commitment, and some thoughts about events that took place during the skiff’s construction. It actually became a mechanism through which I shared the most influential events in my life and therefore is much more than a sequence of construction steps explained. I learned so many boatbuilding skills and enjoyed the project so much, that I have become a lover of wood and water and am already looking towards my next boat.’

See the Duck Trap Woodworking website.

Don’t miss something good – subscribe to intheboatshed.net

The proper proportion of salt in his veins that a British boy ought to have

[ad name=”intheboatshed-post”]

The sort of dinghy we’re told a boy should have. Now
that part seems fair enough!

Have you got the proper proportion of salt in your veins?

These days they say too much salt in your veins causes osmotic pressure leading to raised blood pressure, which leads ultimately to end-organ damage. But it wasn’t always like this, and certainly not when they were busy bringing up the breed that led men into the dreadful battles of World War 1.

I’ve been reading The Complete Yachtsman by B Heckstall-Smith and E Du Boulay, first published in 1912. Much of what it has to say is sensible and reasonable. For example, there’s a great section on the draftsmanship involved in yacht designing. All in all, I’m pleased I invested in a copy.

Nevertheless, there are some bits that bear all the hallmarks of 1912. Take this priceless paragraph on teaching a boy to row, for example:

‘If a boy is of the right sort, with the proper proportion of salt in his veins that a British boy ought to have, he will soon get to love his little craft and a steady development in his character and improvement in his health will be visible to all who know and watch him; for there is no sport in the world that brings out all that is best in a man like that of learning to use the sea for his playground; judgement, courage, and especially self-reliance, are learned there as they can be nowhere else. In all other branches of sport, when a lad or a man feels he has had enough of it he can generally retire. Not so at sea; if he should be caught out in a squall he must fight his way back himself, using his brain to set one force of nature against another to his advantage, and not until the fight is over, and the boat is safe in some shelteredwater, can he rest or retire. This is why the sea so often makes men of boys, and heroes of men.’

Can’t you just smell the tanned leather, liniment and pipe-smoke in that voice? Pass the port Heckstall-Smith, and damn and blast the foreigners.

Copies of The Complete Yachtsman may be obtainable via ABE Books – I’ve been told there are lots around in second-hand bookshops, but the one I have is the first I can recall having seen.

Don’t miss something good – subscribe to intheboatshed.net

Complete free plans package for the intheboatshed.net flat-bottomed 15ft 6in skiff



STOP PRESS – THE FIRST JULIE SKIFF HAS BEEN BUILT AND LAUNCHED BY BILL GAY- CLICK HERE FOR PICTURES

STOP PRESS AGAIN – INITIAL SKETCHES FOR A SAILING VERSION OF THIS BOAT CAN BE FOUND HERE.

ALSO – IF YOU BUILD THIS BOAT OR A MODEL OF IT, PLEASE CONTACT ME AT GMATKIN@GMAIL.COM . I’M HAPPY TO OFFER HELP AND ADVICE, AND VERY MUCH WANT TO KNOW HOW THE PROJECT GOES!

After gardening for much of the day, this evening I’ve spent a couple of happy hours tidying up and sorting out the plans for the intheboatshed.net Julie skiff. (NB – See the bottom of this post if you need plans for a similar but smaller boat.)

So tan-tara! With an imaginary fanfare, tonight for the first time I offer you – a download of the finalised plans for the rowing-only version of the Julie 15ft 7in flat bottomed skiff for plywood stitch and glue construction, including my explanatory essay on her design and purpose, and notes on her construction.

She swallows up five sheets of ply, and for those those who like to think about these things, at her design displacement and trimmed so that the water just kisses the transom, her wetted area is about 38sqft, with a prismatic coefficient of 0.55. Neither figure would be outstanding for a round-bottomed boat, but the wetted area in particular is not at all bad for a simple rowing boat like this. With a flat-bottomed skiff there’s no easy way to improve on either without making the boat much narrower on the bottom, with all that would entail.

Like this boat? Send your comments to gmatkin@gmail.com.

I think she’s a sweet little boat and I’m very much looking forward to seeing some examples afloat. I still plan to develop a sailing rig, plans for a more traditional chine-log style construction, and I’m thinking also of both longer and shorter versions – the shorter will be aimed at creating a small easy to build skiff capable of being built in a British-style garage.

If you do build the Julie skiff, please send me photos and reports at gmatkin@gmail.com, and also please let me know how the project goes. At least while the numbers being built are small, if you hit problems I will be very happy to provide advice to make sure your boat is a success.

Download: intheboatshed.net Julie skiff plans

See all posts so far on this boat:

Complete free plans package for the intheboatshed.net flat-bottomed 15ft 6in skiff
intheboatshed.net skiff – drawings and coordinates for stitch and glue
intheboatshed.net skiff – photos of our model, and maybe yours too?
Intheboatshed.net skiff – now we can make a model
Intheboatshed.net skiff progress
Early drawings for a 15ft 5in lightweight flat-bottomed American-style skiff

PS – It’s become clear that depending on your build, some folks will find the thwart a little high – if that could be you, it will be a very simple job to make the seat lower if you do so at an early stage.

More free boat plans at intheboatshed.net

If you’d prefer a smaller project of this kind, check the 12ft Ella skiff and the 14ft Sunny skiff.

This boat is designed to be built using the stitch and glue technique – if you haven’t done this before you might be interested in my book Ultrasimple Boat Building: 17 Plywood Boats Anyone Can Build or one of the other books on this topic available from Amazon.