Free plans for the intheboatshed.net Ella skiff now online and available to download



[ad name=”intheboatshed-post”]

skiff-zip-drawing

12ft length overall by 4ft beam, by 400lbs displacement, designed for stitch and glue construction using 1/4in or 3/8in 4ft by 8ft plywood

If you build this boat PLEASE send me a report about how the project went and how it works on the water, together with photos! I’m at gmatkin@gmail.com, and will usually be available to  provide online advice.

At last I’ve managed to find a few hours to make up a plans package! I hope it was worth the wait. In a mass of material like this there will no doubt be an error or two, so if you find any, please let me know and I’ll put them right.

For previous posts on the development of this little boat, click here and here.

From the notes:

The Ella skiff as laid out in these plans is a lightweight general purpose stitch and glue flattie skiff for use in sheltered waters with no strong currents or tides. It is not suitable for use on the sea or in hazardous waters.

It is meant to be a simple and quick stitch and glue building job of a size that is convenient for building in domestic garages made to take a small to medium-sized car, which probably describes the building area available to most people.

Like this boat? Send your comments to me at gmatkin@gmail.com.

The boat is designed with rowing primarily in mind, though it could also be used with a VERY small outboard of NO MORE than 2hp. Too many accidents take place because outboards of the wrong size have been used, and far too many of these are fatal. If a small outboard is to be used, the transom should be doubled to ensure it can support the weight of the engine.

The name came from my daughter, who has taken rather a shine to the boat – readers of intheboatshed.net will find photos of a model she has made.

Compared with the Julie skiff, the form of a boat like this must be strongly influenced by the need to work in a decent amount of displacement into a shorter hull, as anyone who compares the lines drawings of the two boats will quickly see. The Ella skiff is therefore a more curvy boat than her big sister, but I hope that her more jaunty sheerline lends a certain cuteness people will like. The stem is angled somewhat in order to turn splashes and ripples downward, for I know that dryness is an important part of comfort in small craft, especially for those unused to boating.

Sailing enthusiasts will note that I have not drawn any details for a sailing version of this boat and I would prefer that no builder should add a sailing rig to this bare design. Boats like this should not be converted for sailing without serious thought about the safety and construction issues.

However, my daughter has asked me to develop a sailing version for her, and at some point I intend to do so. The design for this boat will feature a good amount of built-in bouyancy for safety, will be half-decked, and will probably have a balanced lug rig for ease of sailing.

This boat has been designed by an amateur with no qualifications in boat design or boatbuilding and should be regarded as experimental. The designer accepts no liability for any loss or accident that may result from following these instructions or plans or from any loss or accident that may follow from using this boat.

Click here to download the latest version of the free Ella skiff plans.

PS If you’re looking for a longer, sleeker but equally easy to build rowing skiff, click here.

PPS There’s now a 14ft version, the Sunny skiff. Click here.

This boat is designed to be built using the stitch and glue technique – if you haven’t done this before you might be interested in my book Ultrasimple Boat Building: 17 Plywood Boats Anyone Can Build or one of the other books on this topic available from Amazon.

Sir Robin reflects 40 years after winning the Golden Globe

[ad name=”intheboatshed-post”]

sir-robin-knox-johnston

Sir Robin Knox-Johnston

Today is the 40th anniversary of the day Sir Robin Knox-Johnston sailed his Colin Archer-style boat (designed by Billy Atkin, I believe) Suhaili into Falmouth Harbour and became the first man to circumnavigate the world solo and without stopping.

It was a breathtaking achievement in an era with few of the technical sailing, navigation, communication and safety aids available to ocean sailors today. Although the world knew little about it, Sir Robin had eventful voyage – by the time he passed the Cape of Good Hope he was already in the lead, but a knockdown shifted Suhaili’s coach roof, her water tanks were polluted and her radio was out of action, and later he had problems with his automatic steering.

But despite these difficulties Sir Robin and Suhaili continued and completed the journey to win the Sunday Times newspaper’s Golden Globe Award. There’s a famous story that when she sailed into Falmouth Harbour on 22nd April 1969 to be greeted by Customs officials with the traditional demand of ‘Where from?’ the single-word answer from her skipper was ‘Falmouth’.

Although not at all a conventional racing yacht and not in fact the boat Sir Robin originally intended to use for the circumnavigation, in many ways she could have been made for the job. Built from teak, she is said to be a strong, resilient boat built to a design highly respected for its seaworthiness.

I asked Sir Robin for his reflections on the Golden Globe after 40 years. Here’s his most interesting reply:

‘It’s hard to put the Golden Globe into perspective. I was the outsider, the one the Sunday Times said was most unlikely to succeed, so they did not give me a radio or contract as with the others. It was this attitude which meant it became impossible for me to find sponsorship.

‘Thus I knew little of the others’ plans, and to be honest, was not bothered as I had enough on my plate getting myself and Suhaili ready. The fact that my radio broke down meant that there was no news of me after I departed New Zealand until I was passing the Azores, so attention was on the others.

‘My re-appearance caused surprise to the organisers who by this time were focused on the race to be first between Donald Crowhurst and  Nigel Tetley and I am not sure it was very welcome. Certainly their representative in Falmouth on my arrival was more interested in asking me to attend Tetley’s arrival celebrations, to the extent he never congratulated me.

‘But that did not bother me, I was pleased to be back with family and loyal friends and began to think about what I would do next. My intention was to return to sea but this became unattractive as British India Steam Navigation Company, for whom I was an employee, had disappeared. At 30 years of age, and in those days, you did not retire, you could not afford to.’

Even at this distance in time, the lack of mental flexibility and insensitivity shown by the Sunday Times people seems breathtaking, but Sir Robin’s seems to have risen gracefully above such trifling matters.

See Sir Robin’s website and the National Maritime Museum Cornwall’s online exhibition, and hear him this morning on BBC Radio 4.

Also see Ben Crawshaw’s The Invisible Workshop piece here and the Bursledon Blog’s story about seeing Suhaili, Lively Lady and Gypsy Moth IV racing together in the Solent – it must have seemed strange to see this trio with crews on board instead of a lone figure.

In fact, many of the boating and sailing weblogs are making a bit of day of it, at the suggestion of Messing About in Boats.

Also, while I don’t know what Sir Robin would say about it, there’s also this intriguing new book describing the Golden Globe race and its effects on the lives of the entrants A Race Too Far.

Ella builds a model Ella skiff

[ad name=”intheboatshed-post”]

ella-skiff-5

ella-skiff-4 ella-skiff-3 ella-skiff-2

ella-skiff-1

Ella’s model of the Ella skiff

My daughter Ella has made her own model Ella skiff and told me that she’d like to build the real thing some day. That sounds like a really nice project, even if we already own too many small boats and she lives hundreds of miles away…

For more photos of models of the easy to build 12ft Ella skiff click here. If you make one, please send photos for my collection to gmatkin@gmail.com!

For plans drawings for use in making models of the Ella skiff, click here and for more on my Ella skiff design project click here. However, if you’re looking for something longer and with a bit more performance, try this.

Don’t miss something good. Subscribe to weekly alerts from intheboatshed.net now!