Tag: building

Chris Perkins’ photos from sunny Portsoy 2009

04-07--09 142

Saturday, Portsoy 2009. Not really a day for a race! As usual,
click on the thumbnails for some nice big photos

04-07--09 1087 04-07--09 1026 04-07--09 234

Award-winning lapstrake boat builder and Iain Oughtred boat plan specialist Chris Perkins has written to tell us a little about this year’s Scottish Traditional Boat Festival at Portsoy, and to share some of his photos. If you enjoy these, there are lots more at his weblog Strathkanchris’s Little World.

‘A few snaps for you from a very sultry Scottish Trad Boat Fest. Went to the seminar on Thursday. The session with the Swedish boatbuilders, the Ravinis brothers, was brilliant and I would have liked more, Iain Oughtred’s talk was enjoyable if a bit rushed, and  our American visitor Bob Walser on shanties was enjoyable – he has a good voice. I’m afraid that for me the history of the clippers, although well presented, wasn’t of great interest – they are far too big! Unfortunately I had to leave before Nigel Irens talk.

‘Saturday was a magical day. We were up at 05:30 so we could make the three-hour drive over in plenty of time to see the boats away. Lots of boats, bright skies and very little wind so the race turned into a bit of a drift around on glassy water – but the consolation was that the light was pretty darned good and created some good shots – well I like to think so!

‘It was an event that I think you and Julie would have hugely enjoyed. As always there was far to much to see and hear in the one day, one of these days I will take a boat over and ”do” the weekend properly.‘

Well Chris, it sounds irresistable. I’ll talk with Julie about 2010… Thanks for the photos!

I should add that Chris is a leading light of the Home Built Boat Rally group of British-based home boat builders.

04-07--09 518 04-07--09 1036 04-07--09 856

04-07--09 159 04-07--09 251 04-07--09 994

04-07--09 818 04-07--09 051 04-07--09 583

Don’t miss something good. Sign up for our free weekly email newsletter now!

Traditional boats of Ireland photographed by boatbuilder and weblogger Tiernan Roe

[ad name=”intheboatshed-post”]

Tiernan Roe 1

Heir Island lobster boat Rose and Galway hooker An Faoilean Tiernan Roe 2

Heir Island lobster boat Saoirse Muireann owned byhistorian and
author Cormac Levis

The two gaffers in the upper photo are Rose an Heir Island lobster boat on the left and An Faoilean a Galway hooker on the right. The Saoirse Muireann below is another Heir Island lobster boat, and is owned by historian Cormac Levis author of the well known and highly regarded book Towelsail Yawls describing the sailing lobsterboats of Heir Island and Roaringwater Bay.

The photos have been sent in by Tiernan Roe, boatbuilder and weblogger based at Ballydehob, West Cork.

From the 1870s to the 1950s, sailing boats dominated the lobster fishery of Ireland’s south coast, and the lobstermen lived a semi-nomadic lifestyle over a hundred hundred nautical mile stretch of coastline in the small open boats, yet it’s said that until Levis did his research and wrote Towelsail Yawls, their way of life had been in danger of passing unrecorded. I should add that although it was published as recently as 2002, the book already seems difficult to find – which seems to suggest that he did an excellent job.

As a bonus, here are three photos of a John Atkin Ninigret 22ft outboard boat that Tiernan’s currently building being turned over at his Ballydehob workshop. Follow his weblog Roeboats at http://roeboats.wordpress.com/.

rollover1 rollover2 rollover3

Subscribe to our free weekly email newsletter below:

Duncan Sclare pours 19ft Gartside cutter keel

[ad name=”intheboatshed-post”]

lead-keel-mould the-bath-burner molten-lead-in-the-bath

blow-torch-on-exit-pipe-as-mould-fills how-to-move-a-tonne-of-lead

mould-removed

Duncan Sclare pours the lead keel for his 19ft Paul Gartside-designed cutter. Click on the thumbnails for larger images

Duncan Sclare in County Mayo, Ireland has an advantage over many amateur boatbuilders: 30-odd years of experience as a furniture-maker, cabinet-maker, carpenter and joiner. See his website here to see what I mean.

Talented and practical man though he is, I still think the story of how he cast his own lead keel this week is quite something. Here’s what he says:

‘Hi Gavin. Your readers may be interested in my project to build Paul Gartsides cutter design 163. This build is going to take some time as it has to be fitted in around making wardrobes, kitchens and other stuff I do to make a crust. I have been working on it for almost a year now with little to show exept lofting, lists, stacks of timber and so on.

‘Last weekend however work for real started with the casting of the keel. The pictures show the mould made from MDF and softwood and buried it in sand. Just short of 1 tonne of scrap lead was then melted down in an old cast iron bath. This took about three hours, but then the plug was pulled and the molten lead allowed to run into the mould. There was some singeing of timber and my hair, but otherwise it seems to have been successful!

‘The keel now needs shaping up and we can start to add the oak timbers on top. It will be great to get into some woodwork after that messy job!

‘In the background of the picture of the mould shows larch boards (planking) air seasoning and my battered Orkney Strikeliner still used for day trips around our West Coast.

‘I will keep you posted on (slow) progress. BTW, I love the site – great work keep it up. Best wishes, Duncan.’

Wow Duncan. With so much danger and excitement going on, I’m astonished you found time to take the shots! The result looks excellent, by the way 😉

See Duncan’s striking photos of Inishkea in an earlier intheboatshed.net post.

Don’t miss something good. Subscribe to intheboatshed.net’s weekly email.