Category: Racing sailing craft

Intheboatshed.net highlights of 2009

[ad name=”intheboatshed-post”]

It’s almost impossible to pick out my favourite posts of the year – there are simply too many, and for too many different reasons.

For example, the editor-residents of Intheboatshed.net Towers would have no difficulty picking out the students’ launch at the Boatbuilding Academy in December, but for entirely different reasons we’d equally easily choose the astonishing details of the wherry yacht Hathor, or the various posts on the zulus of the Scottish West Coast, or the review of the lovely new book Holmes of the Humber, or, for that matter, the story of the Iain Oughtred-designed St Ayles skiff and the Scottish Coastal Rowing Project.

And how remiss would we be if we failed to mention Ben Crawshaw’s awesome sailing exploits in his Light Trow, or Dylan Winter’s wonderful Keep Turning Left videos about sailing anti-clockwise around the coasts of Great Britain? I’d like to offer my apologies if I’ve left out your favourites here, but I’m working from memory here – I simply haven’t got the energy required to re-read the 250-or so posts I’ve put up this year.

With the hit-counter below cruising gently towards our millionth, what were readers’ favourite posts? There seems little doubt that the posts that have caught most people’s interest have been about free boat building plans. For example, the post announcing the boatbuilding plans for the Julie skiff 15ft 8in plywood flattie rowing boat has been viewed a whopping 27,647 times. We think it goes to show how powerful is the draw of free plans – but also how effective an advert on this site can be.

A little behind that comes a favourite with model makers and admirers of small Scottish skiffs, A challenge for home boatbuilders: a sweet 10ft clinker-built double-ended skiff, our boatbuilding plans for the sailing version of the 12ft plywood Ella skiff and for the boatbuilding plans for the Sunny 14ft plywood rowing flattie.

Why not let us know what your favourites of the year might have been? We’re very friendly and can be reached at gmatkin@gmail.com.

What will next year bring at intheboatshed.net? It’s impossible to say who will be in touch and what they may send me for publication. I only hope they continue to do so. In the meantime, I can tell you about two projects that are in the works here, the Low -power outboard skiff, and a mark II stitch and glue version of the well tried Light Trow rower-sailer in both its rowing and sailing versions.

Still more on the iconic zulu

[ad name=”intheboatshed-post”]

Scaffie and zulus by Frank Mason, click on the picture for a large image

The recent post showing photos of Spindrift the surviving zulu reminded me that Frank Carr’s book Vanishing Craft includes some nice reading about scaffies, fifies and zulus, and the conditions in which they developed.

Carr reckoned that the three classes had canoe sterns because this enabled to boats to run well particularly when entering the narrow entrance of a harbour, because a sharp-stern boat type enables larger numbers of boats to crowd into the tiny Scottish harbours, and because the strength of the stem construction is particularly valuable in a tidal harbour where the boat will inevitably receive some hard thumps from the bottom of the harbour with every rising and falling tide.

As he says: ‘A sharp-sterned lugger can carry all sail until she enters the harbour, and on letting go the single halyard the sail falls into the boat  by its own weight, and is down in a moment. The boat then surges on with her own impetus and wedges her bows between the projecting sterns of two craft already berthed. There is no bowsprit or other projection outboard to carry away, and a good hard squeeze does not matter when the boats are strongly built.’

There’s a long and interesting exchange of comments following an earlier intheboatshed.net post in which fishing boat expert, journalist, author and kipper king Mike Smylie argues that the zulu was the pinnacle in British fishing boat design during the sailing era, discusses the correct nomenclature for a 50ft zulu-type, and calls into question the often-repeated story that the first zulu was a boat called Nonesuch – he says he has seen evidence that the first zulu was an 80-footer, herself called Zulu. I see from Mike’s book 2002 Traditional Fishing Boats of Britain and Ireland that he lists a number of small surviving zulus, if you can get hold of a copy.

I’d like to add one more quotation from Carr: ‘Big zulus up to 84ft in overall length and of 61ft keel have been built, and in such a craft the enormous fore-lug, rising to a height of some 70ft, is truly a wonderful sail. The zulu skippers were as particular about the cut and set of their sails as any racing yacht skipper, and these fine craft could easily sail 10 knots in a hard breeze. Six big zulus are still working out of Stornaway under sail, and Colonel C L Spencer, the rear-commodore of the Clyde Cruising Club, has told me that he has seen these craft come romping in from sea, passing the steam drifters and leaving them standing. A splendid sight indeed, to see sail beating steam in these days of mechanical efficiency. May they long continue to uphold the tradition of sail in such a magnificent manner!’

And, finally,  I have one more recent photo (below) of Spindrift to share, this time kindly sent to me by Adrian Perquage of Perquage Publishing, Beacette, Guernsey. Thanks Adrian! I think it’s useful to have this side-one view, not least because it shows clearly the striking stern of the zulu type.

Adrian is looking for information and history relating to RN45 MFV called Makalu, which I think is the boat discussed in this news story. If you have anything to share, please let us know using the comment link below of email me at gmatkin@gmail.com, and I will pass the message on.

Spindrift, clearly showing her sharply raked stern – my thanks to Perquage Publishing

Couta sailing boats in the Australian sun

[ad name=”intheboatshed-post”]

Couta boats racing in the Australian sun

Dale Appleton sent us these photos of some almost absurdly good looking Couta boats racing in the warmth of the Australian summer off Queenscliff, Victoria.

(By the way, let me assure anyone who may be wondering – up here in deepest, darkest rural Kent we’ve been snowed in good and proper for the first time in years.)

He says that the Coutas are now highly sought after as a pleasure and racing boat, and even as a status symbol to some, and adds that there is a traditional builder making them to order. I think that’s seriously good news. See the class website.

Dale also pointed out that there’s a hidden treasure on the Couta Boat Club’s website, by the way. Readers may remember that Pete Goss’s Spirit of Mystery expedition recently had a nasty experience when their recreated Cornish fishing lugger suffered a knockdown as they approached Australia. One crew member on deck at the time broke his leg and their boat lost its clinker-built dinghy made from off-cuts from the Mystery herself.

Well, in an amazing coincidence it seems that dinghy has turned up on a beach at King Island, part way between mainland Australia and Tasmania, and I gather it is being fixed up by local boatbuilder Jeremy Clowes, who sailed with the Mystery crew after she reached King Island – I gather he has replaced the upper planks and various other bits and pieces using parts donated by local wooden boat enthusiasts. As Dale says, it’s a story to warm any boat builder’s heart. See the story here.

Surrounded by unaccustomed ice, I’ve been reflecting on how grateful I am that people like Dale and many others are so willing to send in their photos and stories. Thanks Dale and the rest – your efforts are greatly appreciated, and I hope you know how much you add to the sum of human happiness in the boating world.