The hardest voyage – rowing and sailing a Viking ship from Wicklow to Portsmouth

[ad name=”intheboatshed-post”]

Viking Ship Sea Stallion sailing from Wicklow to Portsmouth

Viking Ship Sea Stallion sailing from Wicklow to Portsmouth

Viking Ship Sea Stallion sailing from Wicklow to Portsmouth

The Sea Stallion making it’s way from Wicklow to Portsmouth. Photos from
the press section of the Sea Stallion website. As usual, click on the images
for larger photos

The Viking Ship Sea Stallion is an extraordinary project to sail and row a reproduction Viking ship in the wake of the the originals – and it’s proving to be very hard work for the crew. The project issued this press release a few days ago:

‘It has been the hardest voyage yet,’ says project leader Preben Rather Sørensen over the ship’s VHF Tuesday morning.

The Viking ship Sea Stallion left Wicklow in Ireland at 12 noon on Sunday, and is now, Tuesday morning, running before the wind up the English Channel along England’s south coast with 56 tired crew members, who will soon have been sailing non-stop for 48 hours.

The crew went to the farthest limits of body and spirit in a dramatic night. When they go ashore this evening in southern England, they will have sailed the Sea Stallion further than ever before. This morning they have already sailed 220 nautical miles. Last year the ship sailed from Roskilde to Norway in 36 hours – 240 nautical miles in all. That record will be broken today.

The ship’s voyage from Ireland was extremely demanding. Lands End met the ship with threats in pitch darkness around midnight. There were three-metre-high waves from the Atlantic and the westerly reached gale force at times. We took three reefs in the sail.

We had to transfer a total of four members of the crew to the support vessel, Cable One – the last one at a quarter to five this morning. All four had been seasick so long that skipper Carsten Hvid feared for their health. They have all recovered now and in a short time will be sailed back to the Sea Stallion again. Cable One is equipped with several RIBs. These are big rubber dinghies with powerful outboard motors, and they cope well with even three-metre-high waves.

‘The Sea Stallion has coped with the enormous pressure just fantastically. It has never been pushed any where near so long and so hard. We have had no problems with the ship at all,’ says Preben Rather Sørensen.

‘But we have certainly had to bale out a lot of water, for in the hard weather we took innumerable tons of water in. It says a lot about the nature of the voyage and the ship’s quality as reconstruction that, despite half of the crew being constantly seasick, we have been able to handle the ship and manoeuvre quite safely, reefing in and out and trimming the sail without any great difficulty – despite the enormous forces with which the hard westerly wind has hit the hull and the rigging.’

By: Lars Normann

The Sea Stallion from Glendalough is a reconstruction of the Skuldelev-2 wreck excavated from the bottom of Roskilde Fjord in 1962. Scientific research has shown that she was built by Vikings in Dublin in 1042. For more information: http://www.havhingsten.dk

Tom Naismith’s Sandpiper wins the Water Craft Boatbuilding Awards 2008

[ad name=”intheboatshed-post”]

Laurent Giles-designed Sandpiper wins the Watercraft Boat Building Awards

Tom Naismith’s Laurent Giles-designed Sandppiper Surprise
won the Water Craft Awards at the Beale Park Thames Boat
Show this year. As usual, click on the photo for a
much larger image

Finally, we have the boat that won the Water Craft Boatbuilding Awards for this year – Tom Naismith’s striking Laurent Giles-designed Sandpiper, which he has named Surprise.

Although only 20ft on deck, she’s clearly a big boat for her length, and Tom reports that she took seven years and £20,000 to build.

Sandpiper is the big sister to the smaller Sanderling – and the even smaller but much better known Jolly Boat. I think Tom deserves a prize just for completing her, but I hope she now gets some serious use, as I’m sure she makes a comfortable little ship.

By the way, I notice that there’s an 18ft version for sale at Boats & Outboards, and there’s also a picture of one of these boats on the Classic Marine site.

The boat that didn’t quite win the boatbuilding competition at Beale Park this year

[ad name=”intheboatshed-post”]

Francis Rayns’ handsome 10ft pram dinghy built to plans by John Gardner.

(Click on the images for a larger view)

Francis Rayns clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

It says a lot for the standards of the Watercraft magazine Amateur Boatbuilding Awards that this very nicely made little boat only came second this year.

True, one might complain that the material of the clinker strakes is perhaps a little slender, and tradititionalists might suggest that the  knees could have been grown rather than laminated – but these seem to be small issues when set alongside the near-flawlessness of the work.

What’s also notable about this particular boat is that builder Francis Rayns reports that the materials cost came out at just £250 – I think that’s an appealingly low figure for such a handsome 10ft boat. She’s built in larch on oak with copper fastenings, by the way, and Francis built her to plans drawn after Nathaniel Herreshoff by John Gardner and published in his book Building Classic Small Craft.

If you haven’t got Building Classic Small Craft, I strongly recommend it – in addition to this little classic, the book contains plans for 46 other boats for a price less than £13, and a long section on boatbuilding techniques. You can’t buy much for that little money these days, but this book is a real bargain.

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show