Johnny Tyson builds a 14ft Whitehall at the Boat Building Academy

Johnny's boat leaves the workshop

Johnny’s 14ft Whitehall leaves the workshop on launch day

Johnny workshop 1 Johnny workshop_1 Johnny workshop

And thats all there is to it AK Johnny champagne Johnny Tyson

Boat Building Academy student Johhny Tyson built this John Gardner-designed 14ft Whitehall together with his pal Jerry Reeves, and launched it down at Lyme along with other students’ projects back in June.

The materials Johnny used were West African mahogany on oak with a West African mahogany keel. I gather that following the launch he took it to the Portsoy Scottish Traditional Boat Festival.

There are photos of the build here at Johnny’s website.If you happen to run a boatbuilding business, need staff and like what you see, I gather he’s looking for a suitable job…

I should point out that John Gardner’s books are a tremendous body of work if you’re interested in American boat types, and some of them have been available at very keen prices in recent years it’s well worth checking Amazon – I’d suggest in particular that Building Classic Small Craft including 47 sets of boat building plans is a bargain at less than £15.

My thanks to Academy principal Yvonne Green for the photos.

For more on student launches at the Boat Building Academy, click here.

Advertisements

The boat that didn’t quite win the boatbuilding competition at Beale Park this year

[ad name=”intheboatshed-post”]

Francis Rayns’ handsome 10ft pram dinghy built to plans by John Gardner.

(Click on the images for a larger view)

Francis Rayns clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

It says a lot for the standards of the Watercraft magazine Amateur Boatbuilding Awards that this very nicely made little boat only came second this year.

True, one might complain that the material of the clinker strakes is perhaps a little slender, and tradititionalists might suggest that the  knees could have been grown rather than laminated – but these seem to be small issues when set alongside the near-flawlessness of the work.

What’s also notable about this particular boat is that builder Francis Rayns reports that the materials cost came out at just £250 – I think that’s an appealingly low figure for such a handsome 10ft boat. She’s built in larch on oak with copper fastenings, by the way, and Francis built her to plans drawn after Nathaniel Herreshoff by John Gardner and published in his book Building Classic Small Craft.

If you haven’t got Building Classic Small Craft, I strongly recommend it – in addition to this little classic, the book contains plans for 46 other boats for a price less than £13, and a long section on boatbuilding techniques. You can’t buy much for that little money these days, but this book is a real bargain.

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show