Month: March 2009

Spindrift, a Scotish fifer-style boat built in New Zealand

copy-of-spindrift-digital2

l1000002 copy-2-of-dsc00659

Spindrift

Phil Smith, who recently sent us a fascinating report of his experiences sailing a converted airborne lifeboat, has written for us again.

This time his story is about Spindrift, a fifer-style boat built from kauri in New Zealand. Phil and partner Susie owned her for a while and, just as he did with airborne lifeboat, Phil makes this boat sound very desirable as well as interesting.

For the record, Spindrift measures 30ft (9.14m) loa including bowsprit, 27ft on deck, 10ft in beam, has a draft of 4ft and displaces 5.3 tons.

‘While wandering the piers at Tauranga Marina, New Zealand, about 20 years ago my attention was drawn to a white motor sailer. At first glance she looked odd: like a 42 footer with 15 feet sawn out of the middle and the ends stuck together. She had very high topsides, and a surprising amount of sheer put the stemhead almost 6ft above the waterline. Continue reading “Spindrift, a Scotish fifer-style boat built in New Zealand”

Ella, a 12ft stitch-and-glue skiff

[ad name=”intheboatshed-post”]

12-ft-skiff-displacement-and-sections

12-ft-skiff-sheerline 12-ft-skiff-waterline

12ft-skiff

Preliminary drawings for the Ella skiff

I’ve decided to develop plans for a little 12ft stitch and glue skiff using Greg Carlson’s excellent Chine Hull Developer plywood hull development tool (scroll to near the bottom of this page).

This small project will take a little while to complete, and follows my 15ft 6in stitch and glue Julie skiff, which has attracted a lot of interest. However, boats like the the Julie can easily be a bit too much of a project for many people: they’re too long to be built easily in the average garage (in the UK at least), and they’re marginal when it comes to car-topping.

So these preliminary drawings show the very beginnings of the 12ft small skiff, which I’ve chosen to name after my daughter Ella. It will bear some similarities and of course quite a few differences compared with the larger boat, not least because the lines of a short boat like this must be rather fuller than those of the larger model and can’t benefit from the same hull form features aimed at reducing drag due to the formation of eddies.

However, like the Julie skiff, it has been conceived with rowing, not outboarding or sailing primarily in mind. For those who take an interest in figures, ratios and the rest, the wetted area here is 31sqft, maximum beam at the gunwales is 4ft, the design displacement is 400lbs, the righting moment is 254ft-lbs at 15 degrees of heel, and the prismatic coefficient is about .57.

Anyway, I’d be delighted to hear from people interested in the project – you can reach me at gmatkin@gmail.com.

PS I made a train journey this pm and took the opportunity to make a bit more progress. I’ve made up a lines drawing, and sketched some internal joinery, including what will be a removable centre thwart to allow the rower to row from a forward position when there’s something or someone heavy in the stern.

ella-skiff-drawing-for-website

Seamew & Co

[ad name=”intheboatshed-post”]

frontispiece

‘There is one thing I can depend on when I’m cruising with you.’

‘What is that?’

‘Variety.’

This is the first chapter of the highly entertaining Seamew & Co by Courtenay Hayes, which is supposed to be fiction – though I suspect it’s really a right old casserole of autobiography and fantasy not unlike a celebrity’s account of their years of success. Here, our hero buys his first cruising boat, and immediately everything goes wrong…

p10 p12 p14

p16 p18 p20

p22