Tag: rowing

Our first half-million hits

[ad name=”intheboatshed-post”]

Thames Barges

Thames barges on the Blackwater – one of the first photos
to appear at intheboatshed.net

It feels a little funny when I think of it, but some time in the next two or three days in the boatshed.net will rack up its first half million hits.

Those with long memories will recall that this weblog began in a very small way at the end of 2006, and benefited early on from the support of various weblogs and online magazines, most notably Chuck Leinweber’s Duckworks Magazine and Tim Shaw’s Chineblog.

Ben Crawshaw’s wonderful The Invisible Workshop followed as did Chris Partridge’s Rowing for Pleasure, and so did a host more I won’t mention just now because if I do this post will become too huge for words.

We’re now all part of a community of interconnecting weblogs and online magazines, and I’m grateful to all of them both for their assistance in helping readers find their way here, and for the entertainment and interest they have given us in our household. If you come to this site and happen to land on this post, therefore, I’d like to suggest you take a little time to explore the sites and weblogs, as well as the rest of the intheboatshed.net blogroll.

But I have another request: please send me pictures and stories that you’d like to share! We’re particularly interested in old boats, traditionally built boats whether old or new, in boats that bear the influences of the past, in the history and culture of boating, in influential individuals and in alternative ways of enjoying boating rooted in the past. It doesn’t matter whether you’re a proud owner or not, or a boat builder or other boat related craftsman, or even if you simply have something interesting to sell. And the occasional story about a boat-related shed doesn’t go amiss either!

Finally, I’d like to pay tribute to my family and wife Julie, who has shown immense understanding and enthusiasm over a long period. I know that I’ve been very lucky to have their support and I hope they feel the result justifies the effort and time that goes into the inthboatshed.net project.

Reach me either at gmatkin@gmail.com or by using the intheboatshed.net contact page, which you can get to using the page tab above the title line.

Don’t miss something good – subscribe to intheboatshed’s weekly email newsletter now!

We launch our Phil Bolger Auray punt

[ad name=”intheboatshed-post”]

auray-punt-3

auray-punt-4 auray-punt-2 auray-punt-1

Our new Auray punt tender on the lake behind Jim and Eileen’s house

We finally launched our new Phil Bolger-designed Auray punt tender with the help of our good friends Jim and Eileen Van Den Bos yesterday.

Thanks Jim and Eileen, and many thanks also for the dinner!

A collaborative effort between Julie, myself and Jim, it was made to plans included in an early chapter of his book Boats With an Open Mind, published by International Marine, and bearing in mind that tenders have hard lives, it is built using 3/8in marine ply rather than 1/4in material. DIY boat builders may also be interested to know that the oars we’re using are the ones described by R D Culler and by Jim Michalak, who has published plans for them online. I can confirm that they’re quite easy to make (though you’ll want a power planer) and work every bit as well as Jim says.

Bolger based his design on the Auray punt on a description by Claude Worth in his book Yacht Cruising, which was written in the early years of the 20th century. Worth, who observed fishermen’s boats when cruising the southern coast of Brittany thought that one particular type, which he dubbed the Auray punt, would make a good tender. Awareness of the boat type redoubled in the 1990s, when Bolger wrote about the type in Boats with an Open Mind and included his design.

One reason for Bolger’s interest in this type of boat no doubt arises from the fact that it is a traditional boat that conforms closely to his well known ‘seas of peas’ analogy relating to the design of chine boats – many of Bolger’s designs including the Micro and his flat-bottomed sharpies share the shape of the Auray punt in an elongated form.

So how does this little boat perform? On flat water with one person on board, I can say it feels light and effortless to row until it reaches hull speed on its short water line. Three-up it seems to reach its design displacement, at which it rows rather more steadily but is very well behaved. Two up, it does exactly what you’d expect with a sharply rockered hull form…

I think it will make a handsome tender, particularly if I remember to put something heavy near the bows whenever there’s someone in the stern.

The only caution I would offer is that if you find a copy of the book and decided to build the boat, make a model first!

For more on the Auray punt and Worth’s description at intheboatshed.net, click here.

auray-punt-5

Just feet from our launch site, a moorhen resolutely sits on her floating nest made from reeds

Don’t miss something good! Subrscribe to intheboatshed.net’s weekly email newsletter.

Nick Smith motor launch Lisa at sea

[ad name=”intheboatshed-post”]

lisa-at-sea-fave-3

lisa-at-sea-fave-1 lisa-at-sea-fave-2

Lisa at the mouth of the Yealm

Nick Smith has just sent me these photos of motor launch Lisa at the mouth of the Yealm on the day she was launched. Read all about her here.

If you don’t already know him, Nick comes from Devon, learned boatbuilding the traditional way and specialises in new builds in clinker and carvel for sail, motor and rowing power from 8ft to 28ft with a special emphasis on West Country style and design, and also takes on repairs and refits from 25ft to 50ft. These days he’s based in Hampshire, and can be contacted by email at nick_smith_boatbuilder@yahoo.com and by phone on phone on 07786 693370.