Tag: motor boat

Star Yachts’ strip built 22ft cabin motor launch

Official launch of Star Yachts Bristol 27 Morgana

Official launch of Star Yachts Bristol 27 Morgana Official launch of Star Yachts Bristol 27 Morgana Official launch of Star Yachts Bristol 27 Morgana

Official launch of Star Yachts Bristol 27 Morgana Official launch of Star Yachts Bristol 27 Morgana

 

Win Cnoops of Star Yachts sent over these photos of the official launch of the Andrew Wolstenholme-designed Bristol 22 strip-built cabin motor launch his company is offering these days.

I think it’s a pretty thing and I hope it catches on – it’s not exactly old fashioned, but has some old fashioned ideas about it that make a handsome craft that serves to show how strange, angular and droopy-nosed motor boat design has become.

Among other things, it would make a very appropriate committee boat for an up-market yacht club looking for a bit of class rather than the usual plastic club-tub.

Combining features of a 1920s gentleman’s launch and a more sturdy harbour launch, the Bristol 22 has a narrow, easily-driven hull that requires needing only a relatively small engine – so much so that on a river or canal an all-electric version is practical. The layout of the boat provides for overnight or short holiday accommodation in the forward cuddy.

If you’re a Facebooker, why not ‘like’ the new Star Yachts Facebook page, where you’ll be able to follow the building of the 27ft version?

The incomplete tale of a Norfolk racing launch

[ad name=”intheboatshed-post”]

Rocinante at Reedham

Keith Johnston has kindly written in with some photos and the story of a boat that’s often moored at Reedham on the Norfolk Broads. It’s an intriguing boat that looks like a Thames slipper launch, but which nevertheless has a completely different background. I’ll let Keith tell the story:

We were approaching Reedham on the Norfolk Broads when I noticed a boat which looked rather like a slipper launch and, as I had just finished building one, I decided to make enquiries because this appeared to be a boat out of its normal habitat.

There are two boat yards at Reedham so it didn’t take a lot of searching to find the background to this good looking vessel. I found Steve Sanderson at Hall’s Old Boatyard and he was kind enough to tell me the story of this particular boat.

Rocinante as her reincarnation is called, is not a slipper launch at all but a 23ft Norfolk racing launch, the original of which Steve found on a Yarmouth demolition site in an extreme state of dereliction – and about to be burnt.

However, being a proper wooden boat enthusiast he decided that the boat should be restored or at least saved. He brought the remains to his boatyard in Reedham and he began talking to his friends and neighbours about the boat in general.

On the way back to Wroxham I found the other hull, now fully fitted and moored in Horning. From the river and with a cover on she looks virtually identical to Rocinante – however, I am told that she has been fitted with an American marine diesel engine of 4.8 litres, which should put this launch very definitely back in the racing category!

I did some research and found that launch racing started on Thursday 23rd August 1903; the inaugural race was during Oulton Broad Sailing Regatta Week that year organised by the Royal Norfolk and Suffolk Yacht Club under the auspices of the Norfolk Automobile and Launch Club. Six boats competed in a single heat, and the race was won by a steam launch named Monarch – but by 1910 there were big changes. There’s an interesting club history on the website http://www.lobmbc.co.uk.

For more on this no much more complete story, click here.

Lars Herfeldt builds a gentleman’s runabout at the Boatbuilding Academy

[ad name=”intheboatshed-post”]

16ft gentleman’s runabout Lola, built to a design by C G Petterson, and photographed at the Boatbuilding Academy’s student launch day in December

Lars Herfeldt built this very pretty motorboat during his Boatbuilding Academy course at Lyme using plans by the Swedish designer CG Pettersson.

Academy principle Yvonne Green reports that Lola, which is named after one of Lars’ grandchildren, is a 16ft cold moulded motorboat made from two layers of 3mm plywood with a final layer of mahogany veneer laid fore and aft to simulate a more traditional carvel planking construction.

While on the course Lars wrote a weblog that includes the boat build but also of his life while living at the Academy on the course – it’s in German but includes many excellent photos including a series showing one of the famous Beer luggers going about. He also played Father Christmas at the Academy Christmas dinner, at which Yvonne says he managed to look as if he’d stepped out of a Norman Rockwell illustration.

For more photos from the student launch, check out Edward Pearson’s Picasa photo set of the event.

Intheboatshed.net readers may be interested to know that Lars is returning to the Academy in September to instruct a residential course on building West Greenland kayaks in September, at which up to eight students will build a traditional kayak over ten days – course members will stay at nearby Trill Farm and build the boats in the farm’s  magnificent old barn.

Many thanks for the story Yvonne – and don’t forget to tell us more about the kayak course, as I think there will be some interest from readers!