Ian Baird’s replica of a Dorset crab and lobster boat in the workshop

[ad name=”intheboatshed-post”]

Ian Baird's Dorset crab and lobster boat at the Boat Building Academy

Boat Building Academy student Ian Baird’s project to build a replica of the rare Dorset crab and lobster boat known as Witch of Worbarrow during his course is continuing apace, as it must to be be ready for the big launch on the 9th December.

For more posts relating to Witch and Worbarrow, click here.

Ian, who was a novice woodworker at the beginning of his nine month course at the BBA, has been commissioned to write three articles on his experiences for Watercraft Magazine. The first of his articles will be published in January 2011.

“The centreline structure went together reasonably simply, but the first three planks on either side were really difficult for a fledgling boat builder,’ he reports. ‘The garboard and plank above both return onto the keel and the stern post at an awkward angle and there was a good deal of steaming, rabbet altering and scratching of heads, but we got it right in the end. The third plank was a bit of trouble too, with a tight curve onto the transom, but we are now banging on a plank a day.’

Ian says there has been a lot of interest in Ian’s project: ‘We originally put out a press release to try and winkle out any information we could about the original boat’s life and times, but the response has been more than I could have hoped for.

‘Interest from Intheboatshed.net, local television news and local papers has reached an extraordinarily wide audience and many people have come forward with information and pictures for which I am extremely grateful.’

A pictorial diary of Ian’s project is available at the BBA website.

The launch of the BBA’s March 2010 project boats will take place in the harbour at Lyme Regis, Dorset, at 9am on Wednesday 9th December 2010.

Want to learn more about boatbuilding using the clinker technique? Try John  Leather’s book Clinker boatbuilding at the revived intheboatshed.net A-store.

Nick Smith’s latest motor launch – the ribs are steamed out and riveted

[ad name=”intheboatshed-post”]

Clinker built boat riveting ribs into place Nick Smith

Using an ‘iron’ or ‘dolly’ to drive the nail over into the ribs. It is of course very important for the iron to be in the right place as the nail comes through!

riveting ribs into position clinker  built motor launch ribs clinker built boat ribs

Nick Smith’s latest project has taken a big step forward with the addition of her ribs, and our friendly boatbuilder has kindly sent in some more photos and a few words of explanation.

I must say the process looks like hard work, but no doubt many hands make light work, and entertaining banter too.

Nick tends to call the new project Bamboo Viper II, because she’s very much like an earlier boat he built by the same name – you can see earlier posts here and here

Here’s what Nick says about the latest phase in BVII’s construction:

‘Hi Gav,

‘Some photos of BVII yesterday.

‘We got a crew of five – luxury! – together to steam out the ribs on the new Bamboo Viper II. We pulled the first rib out of the steam box at 10.30am, and drove the last nail at 12.15am, which was the best time in all the years we have been building. We only broke three timbers, which was fine as the shorter lengths can be used forward or aft, where they butt onto the apron or transom knee.

‘So had some “spare ribs”, which I bent off the job to come in for odd repairs to broken timbers on customers boats.

‘The next task is to rivet up, I tend to do the upper-most four or five by myself (as my arms are long enough) then get my “oppo” to lie on the floor and “hang on” while I get inside the boat and rivet.

‘When I was apprenticed this job was done in one hit immediately after steaming had finished, so as the “boy” there wasn’t time to draw breath – as soon as the rib was in place I was straight under the boat (damp earth floor) holding on with an iron whilst the journeyman rivetted as fast as he could, no stop, no hesitation, no breaks, til we had done. And if ever I was on the wrong nail head as he drove or rivetted I was referred to by him in no uncertain terms as a ‘f****** c***’ so I learned very quickly to concentrate. This is not a teaching method I have carried on.

‘Gav, I think it’s brilliant what you have done and are doing with this weblog, many thanks,

‘Nick’

Thanks very much Nick – it’s particularly good to see photos of the riveting process in action. You must make a video one day!

Dear reader: I can’t make intheboatshed.net work without contributions like this and need more of them to keep going! If you have a story to tell, please get in touch either using the contact page or by emailing me at gmatkin@gmail.com.

Nick comes from Devon, learned boatbuilding the traditional way and specialises in new builds in clinker and carvel for sail, motor and rowing power from 8ft to 28ft with a special emphasis on West Country style and design, and also takes on repairs and refits from 25ft to 50ft. These days he’s based in Hampshire, and can be contacted by email at nick_smith_boatbuilder@yahoo.com and by phone on phone on 07786 693370.

Want to learn more about boatbuilding using the clinker technique? Try John  Leather’s book Clinker boatbuilding at the revived intheboatshed.net A-store.

Where is Erik the Red?

[ad name=”intheboatshed-post”]

donald ridler, erik the red, dory, boat plans, eventide owners,  dory, boatbuilding, transatlantic voyage, sailing boat

donald ridler, erik the red, dory, boat plans, eventide owners,  dory, boatbuilding, transatlantic voyage, sailing boat

Cover and illustration from Erik the Red

Nick Duffy of Paget, Bermuda is travelling to the UK shortly and wishes to see Donald Ridler’s home-built dory  Erik the Red, as immortalised in the epic book describing how he constructed the boat in his paerents’ garden and then sailed it across the Atlantic.

Erik the Red was last heard of at the Exeter Maritime Museum, which closed some years ago. Does anyone know the whereabouts of this boat and whether it will be possible for Nick to see her?  I would guess that she’s likely to be in store somewhere, but if any reader has information please contact me at gmatkin@gmail.com and I will pass it on.

By the way, the Eventide Owner’s Group, which sells the Mouette plans from with Erik was built, has its own story about what happened to the boat, and this small snippet of information about a larger boat built using the same plans.

A number of Amazon sellers have copies of the Donald Ridler’s original book Erik the Red.