Katydid loses her ballast keel, but what about her wooden one?

[ad name=”intheboatshed-post”]

Fife-built Clyde 17/19 lugger Katydid loses her iron ballast keel

I love restorations. The restorer never knows quite what he or she is going to come up against, and along the way they generally find all sorts of interesting things. An example in this case is a keel bolt in such sad condition that I wonder whether it contributed anything at all to keeping the keel attached the last time this boat went sailing.

Restorers are also obliged to make all sorts of decisions as they go along. Right now, Charlie Hussey is having to decide whether Katydid’s 115-year old wooden keel can be repaired, or whether it needs to be replaced. He’s even asked us to look at the photos and throw in our tuppences…

See Charlie’s weblog here: http://www.marinecarpentry.com/katydid/

Well, I let him have my guess, even though I’ve no idea what hundred-plus- year-old timber looks like when it’s bad compared to when it’s still ok. I think I’ve heard that an electrolysis process makes it look quite strange quite some time before it actually becomes weak, but what do I know? Perhaps Charley will give us his decision in a day or two.

PS – I’ve just noticed that intheboatshed.net is now two years old, almost to the day. It’s been quite a ride, and some would say something of an obsession. Still, it has also been fun, and satisfying too. The sharp-eyed will know that we’ve recorded almost 320,000 hits in that time, and some may even have spotted that only today we’ve scored a new record for traffic on this site, thanks to our dear friends at Duckworksmagazine highlighting the Julie skiff project.

Don’t miss something good – subscribe to intheboatshed.net

Remembering the WWII seamen who braved Hellfire Corner bringing coal to the south

[ad name=”intheboatshed-post”]

Pill box at Rye Harbour, where seamen risked their lives
and the British feared invasion

Boating enthusiasts in the South East of England are constantly reminded about the battles that have taken place or have been expected in this corner of the country. The wartime relics are so many that almost the only time we can’t see them is when they’re obscured by foul weather.

But last night, the evening before Remembrance Sunday, I was pleased to see a repeat of the BBC Coast series programme covering the Channel Islands and Dover.

It was well worth watching as usual, but this particular transmission included an interesting segment about the brave Navy and merchant seaman of the convoys carrying essential supplies such as coal through the Dover Straits during World War II.

As every British schoolchild knows, the sea separating Britain from Continental Europe is just 21 miles wide, and so the convoys could be hit by land-based guns based in occupied France, and were very vulnerable to attack by both fast German E-boats and aircraft while passing along the coasts of Kent and Sussex.

See the programme here on the BBCi player – though I gather readers in the USA aren’t able to see this material.

There’s also an interesting summary of the big guns used by both sides at the Wikipedia.

Heckstall-Smith and du Boulay on the origin of 19th century racing yachts


Wood engraving The Yacht Race – A Sketch from the Deck of a
Competing Yacht
, was published in Harper’s Weekly in  1872.
Taken from the Wikimedia Commons

Although Charles II was almost as enthusiastic about yachting as he was about his many mistresses, his collection of 16 yachts do not seem to have had much of an influence on later racers.

From their researches including studying Clark’s History of Yachting up to the year 1815, Heckstall-Smith and Du Boulay say later racing yachts derived their form largely from revenue cutters.

They write: ‘the fashionable type of cutter was about three and a quarter beams to her length, her midship section was so round it might have been drawn with a pair of compasses. She had a nearly vertical stem, and a  short counter high above the water. The greatest breadth was just abaft or close abreast of the mast. The bow was therefore bluff, and the run long and often not ungraceful.’

The type was known as ‘cod’s head and mackerel tail’ and had evolved  in competition with the craft used by smugglers. This seems to me to be a case of a rather imperfect form of evolution, if faster boats could have been achieved by moving the greatest beam aft, but there are some good stories about how the same boat builders worked for both smugglers and  the revenue men.

Living in Kent as I do, this one from Heckstall-Smith and du Boulay appeals to me particularly: ‘it has been recorded that Mr White of Broadstairs, whose descendants afterwards moved to Cowes, used to lay down two cutters side by side, very much as 19-metres and 15-metres are laid down today, and the Government officials used to puzzle their brains to puzzle out which would turn out the faster, knowing that whichever boat they bought, the other would be sold for smuggling.’

For more on revenue cutters at intheboatshed.net, click here.

Don’t miss something good – subscribe to intheboatshed.net