Forest & Stream skiff built in steel

[ad name=”intheboatshed-post”]

BILD0278

BILD0274 BILD0275 BILD0276


Hans-Christian Rieck has written from Germany with the news that he and some unemployed kids are building a Forest & Stream skiff in steel.

It’ll be very interesting to see how this boat works when it is launched – naturally, I have mentioned the weight issue and that the boat will need bouyancy tanks to make it safe. One should remember that steel-built barges from Germany and Holland frequently have steel-built tenders – so what may seem surprising to some of us will be quite normal for many of our neighbours.

Here’s what he says:

‘Always short of funding, I came upon your site because of the free plans. As most of our juveniles prefer steel to wood, I try to build the Forest & Stream skiff from 3 mm steel. I“ll take some photos to send you from time to time to inforn you on the progress we make.

‘Yours, Hans-Christian Rieck’

I’m always delighted to hear that my plans are being put to good use! For more on the Forest & Stream skiff and for the plans, click here.

Don’t miss something interesting. Subscribe to the inthboatshed weekly free newsletter.


Paul Connor’s photos from the Lake Union Wooden Boat Festival at the Centre for Wooden Boats, Seattle

[ad name=”intheboatshed-post”]

Herreshoff_ketch

Paul Connor has also kindly sent us a set of photos of a festival dockside stroll – this time from the Lake Union Wooden Boat Festival at the Centre for Wooden Boat’s base in Seattle. Thanks Paul and sorry about the delay – I’ve been away sailing – it tends to happen at this time of year, so please don’t think the worst if the weblog goes quiet for a few days.

I particularly like the H12 1/2 – if anyone doesn’t I think they probably need to pray for their soul…

Paul is working towards building a double-ended skiff based on the plans for a double-ended skiff presented in the book Boatbuilding for Amateurs. Click here for more on this project. I’ve added labels where the boat concerned is identified.

If anyone would like to add any comments or information, please do so using the comments link at the end of this post.

Alien_queen AQ_boiler AQ_controls

Barnacle Chriscraft_fwd

H12-5_side H12-5_quarter H12-5_interior

H12-5_fwd

H12 1/2

Hvalsoe_13 Hvalsoe_16

Hvalsoe 13 and 16

Magic_Wing Magic_wing_Side Matinicus_peapod

Little Wing and a peapod

Melonseed

Melonseed

Sea_Dog_Aft Sea_Dog_Fwd Sea_Dog_Transom

Unknown

Unknown – but it looks like a huge Paradox. Is it a heavy sharpie of the Hog Fish Lips type?

Iain Oughtred draws the boat that will bring coastal rowing races back to Scotland

[ad name=”intheboatshed-post”]

St Ayles skiff

Iain Oughtred’s initial drawings for the St Ayles skiff

The Scottish Coastal Rowing Project is a new initiative intended to encourage boat building and rowing racing in Scottish coastal communities.

Based at the Scottish Fisheries Museum in Anstruther, its plan is to re-start the intercommunity rowing competition that for many years was a strong feature of life in the coastal communities of Scotland.

Until the 1960s there was a considerable interest in boating in the mining communities in Central Fife, and a strong fisheries industry in the East Neuk, and these communities held their own regattas on a regular basis using their own local boat types.However, where these regattas have continued, they are generally run by sailing clubs using largely mass-produced GRP yachts and dinghies, with the exception of Dysart Sailing Club, where I gather a few traditional boats are still raced.

There are, we’re told, no rowing races in Fife apart from the Newburgh World Coble Boat Championship.

I guess the organisers have looked long and hard at the wonderfully successful resurgence and spread of interest in racing pilot gigs from the Scilly Islands and Cornwall – no doubt there was a danger that this kind of racing could have appeared in Scotland, but in Cornish boats!

The folks behind the SCRP have wisely commissioned Iain Oughtred to design a suitable clinker ply boat based on the lines of the Fair Isle skiff and to be called the St Ayles skiff, while kit supplier Alec Jordan of Jordan Boats is on board to supply the cut parts for the project. Iain’s beautiful initial drawing appears above.

The first boat will be made from a kit cut by Alec over the winter of 2009-10. The process will be recorded and placed on a website as a tutorial for other builders to follow, and the kits are estimated to cost about £1350, with the complete boat costing around £3000 in materials. I should add that a sailing rig is also planned.

For more, read the leaflet and prospectus. I gather the building project will be covered in Water Craft magazine.

Don’t miss something good. Subscribe to our free weekly email newsletter now!