Centaur wins Heritage Lottery funding

Sailing barge SB Centaur

We’re delighted to learn that the Thames Sailing Barge Trust has won a Heritage Lottery Fund grant for restoration work on Centaur – and I gather that the work is to be done at Oare Creek by Tim Goldsack.

The spritsail barge is to receive £100,000 to pay for restoring the wooden planking on Centaur’s bottom to its original thickness after nearly 118 years of sailing in the Thames Estuary and East Coast rivers.

Sailing barges are built with two layers of planking on their flat bottoms – a 2in inner layer and a 1in outer layer that is designed to be sacrificial – that is, it protects the inner layer of the hull planking from the wear that occurs in the course of normal activity when the barge settles on a beach or river bank.

After 118 years, Centaur’s sacrificial planking has worn thin, and it is this work that the grant is to pay for.

The repair work begins in August and the project is planned for completion by early 2014. The project will allow some trainee shipbuilders to extend their skills to larger wooden vessels.

This project will allow the TSBT to continue to operate her for the use of local groups and members of the general public, and will also provide opportunities for volunteers, youth organisations and schools to research or explore Centaur’s early history.

SB Centaur was built in 1895 at Harwich, Essex, and is one of the oldest surviving wooden barges. She carried bulk cargoes on the Thames Estuary and the rivers of Essex, Suffolk and Kent for over sixty years.

Restored Kenneth Gibbs 14ft Halcyon dinghy for sale

Gibbs Halcyon dinghy by Abingdon and Skabardis

North Kent boatbuilders Abingdon & Skabardis Marine Carpentry has put the gaff-rigged Kenneth Gibbs 14ft Halcyon sailing dinghy mentioned in an Intheboatshed.net post a week or two ago up for sale.

The sweet looking and snug-rigged little clinker-build sailing dinghy is on eBay, listed as ‘Classic Clinker Sailing Dinghy’ in the ‘Other sailing’category. The posting comes with lots of photos…

A busy and interesting summer for Stirling and Son

Stirling and Son 14ft dinghy

Stirling and Son are busy as usual this summer with varied work both in and around Plymouth and further afield.

Stirlings must be counted one of the most interesting boat building and design operations around. Down at their covered slipway at Plymouth, the pilot cutter Cornubia is having her hatches re-varnished and a replica Viking longboat is being repaired.

Further afield, in May a small team went to Germany to work on the 60ft teak built Mylne yacht Mingary. This is a link to a video of work on the yacht. See a video of the work on that job below:

In June Sara and Will visited Glasgow for the Clyde Classic Design Symposium and delivered a talk about the process of designing the new Victorian racing cutter Integrity at the Royal Northern and Clyde Yacht Club.

The plans for the 14ft sailing dinghy that Sara and Will sailed around the Eddystone Lighthouse and then across the Channel are now available. The plans comprise lines, sail plan, construction plan and technical detail with templates of the backbone, knees, rudder and moulds.

The study plans show the level of detail and are accompanied by a materials list and a scantlings list. The plans are not available through the website (which is due to be updated). For information on the plans please email Will at info@stirlingandson.co.uk.

14ft sailing dinghy study plans

In Spain Martin Scannall has built and launched a 9ft dinghy built to Stirling and Son plans. She is to be the tender to the cutter Sauntress.

At the other end of the scale Will is working in conjunction with naval architect Theo Rye on the design of a 140 ton topsail schooner of circa 1830 that is to be built in the far East.

Stirling and Son undertake traditional boat building and wooden boat repair and have an office at Tavistock, tel 01822 614259, and a covered yard at Devonport, tel 07727 233346.