Spindrift, a Scotish fifer-style boat built in New Zealand

copy-of-spindrift-digital2

l1000002 copy-2-of-dsc00659

Spindrift

Phil Smith, who recently sent us a fascinating report of his experiences sailing a converted airborne lifeboat, has written for us again.

This time his story is about Spindrift, a fifer-style boat built from kauri in New Zealand. Phil and partner Susie owned her for a while and, just as he did with airborne lifeboat, Phil makes this boat sound very desirable as well as interesting.

For the record, Spindrift measures 30ft (9.14m) loa including bowsprit, 27ft on deck, 10ft in beam, has a draft of 4ft and displaces 5.3 tons.

‘While wandering the piers at Tauranga Marina, New Zealand, about 20 years ago my attention was drawn to a white motor sailer. At first glance she looked odd: like a 42 footer with 15 feet sawn out of the middle and the ends stuck together. She had very high topsides, and a surprising amount of sheer put the stemhead almost 6ft above the waterline. Continue reading “Spindrift, a Scotish fifer-style boat built in New Zealand”

Ella, a 12ft stitch-and-glue skiff

[ad name=”intheboatshed-post”]

12-ft-skiff-displacement-and-sections

12-ft-skiff-sheerline 12-ft-skiff-waterline

12ft-skiff

Preliminary drawings for the Ella skiff

I’ve decided to develop plans for a little 12ft stitch and glue skiff using Greg Carlson’s excellent Chine Hull Developer plywood hull development tool (scroll to near the bottom of this page).

This small project will take a little while to complete, and follows my 15ft 6in stitch and glue Julie skiff, which has attracted a lot of interest. However, boats like the the Julie can easily be a bit too much of a project for many people: they’re too long to be built easily in the average garage (in the UK at least), and they’re marginal when it comes to car-topping.

So these preliminary drawings show the very beginnings of the 12ft small skiff, which I’ve chosen to name after my daughter Ella. It will bear some similarities and of course quite a few differences compared with the larger boat, not least because the lines of a short boat like this must be rather fuller than those of the larger model and can’t benefit from the same hull form features aimed at reducing drag due to the formation of eddies.

However, like the Julie skiff, it has been conceived with rowing, not outboarding or sailing primarily in mind. For those who take an interest in figures, ratios and the rest, the wetted area here is 31sqft, maximum beam at the gunwales is 4ft, the design displacement is 400lbs, the righting moment is 254ft-lbs at 15 degrees of heel, and the prismatic coefficient is about .57.

Anyway, I’d be delighted to hear from people interested in the project – you can reach me at gmatkin@gmail.com.

PS I made a train journey this pm and took the opportunity to make a bit more progress. I’ve made up a lines drawing, and sketched some internal joinery, including what will be a removable centre thwart to allow the rower to row from a forward position when there’s something or someone heavy in the stern.

ella-skiff-drawing-for-website

Nick Gates & Co, of Thornham Marina

[ad name=”intheboatshed-post”]

lady-may

scods2 scod

girouette

From top: Lady May;  SCODs ; and Girouette

Nick Gates & Co is a traditional workshop based at Thornham Marina, near Emsworth in Hampshire.

Set up in 1999 by boatbuilder Nick Gates, the company specialises in the repair and restoration of wooden boats and looks after a wide range of craft, from clinker dinghies, to classic racing yachts, steam launches and gentleman’s motor yachts.

Nick trained at the International Boatbuilding Training College in Lowestoft before joining the renowned Combes Boatyard in Bosham, where he worked until the yard closed in 1999.

Boats being worked on in the yard at the moment include Lady May, a 1930s Camper & Nicholson launch, which came to the yard for finishing and to have its interior put back in, and Girouette, a Hillyard-built boat that has been in the same family for nearly 50 years.

Partially restored by Combes in the early 1990s, she has since been laid up, and is now at Nick Gates & Co for a new deck, interior and engine.

Nick also specialises in the Nicholson-designed, 26ft South Coast One-Design (SCOD), and in recent years five of the local fleet have visited the workshop. The jobs carried out on these boats have included a total rebuild, new decks and coachroof, external varnishwork and mast repairs.

For more information see the company’s very nice website at http://www.nickgates.co.uk

This page from the site might be particularly interesting to anyone who has been interested in the progress of Gadfly II – note the strong resemblance.