Category: Techniques

Hannu Vartiala’s website changes address

[ad name=”intheboatshed-post”]

Hannu’s coracle. His site offers plans for a range of
small boats derived from traditional types

Hannu Vartiala has just let me know that he has moved his website to a new address – so I’d like to take this opportunity to direct intheboatshed.net readers over there for a happy few minutes.

It’s true that Hannu’s chosen boatbuilding material isn’t mainstream for intheboatshed.net, but those of you who yearn to build a small boat and are happy to do so in plywood may well find his plans interesting, for as well as the coracle pictured above, he has included some interesting boatbuilding plans and material on flat-bottomed swamp boats, drawings for a useful-looking 12ft flat-bottomed skiff, various variants on the Auray punt theme including Chapman’s Ekstock boat, and a couple of light-weight plywood dories. Well worth a look, I’d say.

[ad name=”link-unit-post-bottom”]

17ft clinker-built launch Lisa gets framed-out

[ad name=”intheboatshed-post”]

Nick Smith’s latest build Lisa gets her ribs

While we were away, professional boatbuilder Nick Smith sent us this brief update on his current commission, a 17ft launch to be called Lisa. Here’s his note to me about it – I love the human touches, and the sense of a continuing tradition in what he says:

‘Hi Gavin,

‘For your interest here’s a photo of Lisa framed out.

‘It took two and a half hours (including a break for cold beer) from steam up. There were four of us, two outside driving the copper nails and two inside bending the timbers.

‘The first five seconds after taking the rib out of the steam box are crucial – that’s all the time we have to give the frame a quick ‘pre bend’ and then a final bend into place, ready to nail while the rib is still hot. No drilling of the rib is necessary.

‘I first did this task when I was 16 years old and it has remained unchanged for donkey’s years.

‘So the next job is to rivet all the nails, with one bloke outside (traditionally it’s the apprentices job, that is the ‘boy’) holding an iron (or dolly) on the nail head while I work inside the boat doing the rivetting (or clenching).

‘First I drive a ‘rove ‘ (or ‘roove’ or ‘ ruv’ onto the nail. The exact name depends on where you are in the country), but it’s basically a copper washer. For this we use a rove driver and a hammer, then cut off the point of the nail with a pair of ‘cut nippers’ then rivet ( or ‘peen’) over the rest of the nail with a rivetting hammer, which is just a ball peen hammer of an appropriate weight. Its a dull job and therefore traditionally done quickly from start to finish to get it over with!

‘Thats it for now Gavin some more photos when the engine is in.

‘Thanks, Nick’

And thanks to you Nick!

Nick Smith can be contacted at nick_smith_boatbuilder@yahoo.com.

[ad name=”link-unit-post-bottom”]

National Maritime Museum Cornwall small boat register goes online

[ad name=”intheboatshed-post”]

St Agnes lighthouse, Scilly Isles – see
the news about Troze below

The National Maritime Museum Cornwall’s small boats register has gone online – and we’re all invited to let its organisers know of any craft that should be included. I should think there are hundreds!

Here’s the NMMC’s release on this important project:

‘Over the past few years, National Maritime Museum Cornwall has been working on a database of boats which deserve heritage protection. With the help of other museums, owners and charitable trusts, the Museum has been assembling a list of over 1200 boats.

‘Now part of this database known as the National Small Boat Register including boats under 40ft in length, is available on the web and everyone is invited to help make it the definitive list for the UK.

‘The list is modelled on the database used for ships – the National Register of Historic Vessels – but uses a new ‘history pod’ to identify key dates in a craft’s history.

‘Jonathan Griffin, director of the Maritime Museum says: “There is still much work to do. We need to obtain owners’ permission to publicise details of some of the boats we already hold on the database. We’d welcome hearing from everyone about other boats which they feel should be included in the Register.”

‘Looking ahead, the Museum is keen to develop a discussion forum to make the whole register inclusive and a place where enthusiasts can exchange information about the boats.

‘Have a look at the research area of the Museum’s website at www.nmmc.co.uk and see if your boat or a boat you know of should be registered.’

Also new from the NMMC has also launched an interesting-looking quarterly online journal called Troze. The first issue concerns wrecking on the Isles of Scilly.

Museum’s staff sayTroze will welcome article submissions from enthusiastic researchers, writers or people who are knowledgeable or passionate about their topics.

If you’re wondering, as I was, the title of the journal is taken from the Cornish word for the sound made by water about the bows of a boat in motion.

[ad name=”link-unit-post-bottom”]