Category: Techniques

Intheboatshed.net skiff progress

[ad name=”intheboatshed-post”]

Julie – a flat-bottomed 15ft 6in skiff from intheboatshed.net.
As usual, click on the image for something much bigger!

This is the easy-to-build stitch and glue version of the Julie skiff, named after my partner. A more challenging traditional version is to come later, but meanwhile I think this straightforward s&g build should appeal to many first- and second-time boatbuilders.

She has a good hull that will row nicely, and has been laid out for convenience and easy construction with the number of parts reduced to a minimum consistent with a strong, rigid structure.

In this post you can see that I’ve made some significant progress towards completing the plans, but the next big job, of course, is to map out the panels, which I intend to do in the next few days. I’d be delighted to hear from anyone out there who is interested in this project.

A question from a reader has prompted me to explain the foredeck detail. It’s not meant to be used as a seat, and I’ve placed it 3in below the sheerline partly because I think it looks nice but also because it provides somewhere to keep a mooring line and maybe a small anchor. I haven’t drawn them yet, but the idea is to have two drains to open water at the wide, aft end of the foredeck area.

See the whole series of posts on this project:

Complete free plans package for the intheboatshed.net flat-bottomed 15ft 6in skiff
intheboatshed.net skiff – drawings and coordinates for stitch and glue
intheboatshed.net skiff – photos of our model, and maybe yours too?
Intheboatshed.net skiff – now we can make a model
Intheboatshed.net skiff progress
Early drawings for a 15ft 5in lightweight flat-bottomed American-style skiff

Don’t miss something good – SUBSCRIBE to intheboatshed.net below:

Early drawings for a 15ft 5in lightweight flat-bottomed American-style skiff

[ad name=”intheboatshed-post”]

Preliminary drawings for a 15ft 5in flat-bottomed light rowing
skiff, 500lbs displacement

Although the 15ft light-weight American-style flat-bottomed plywood rowing skiff has become an elegant design classic, it’s perhaps surprising that there aren’t more sets of plans around. So, after some prompting by Win Cnoops of the Slipway Cooperative early this summer I’ve started work on one. It’s high time I got around to some designing again!

Here are some snaps of my early results. The waterline here is at 500lbs, and the discerning eye will be aware that the bows will be just out of the water most of the time, and that will also have noticed that the panels at the entry are quite straight, while those at the stern have more shape.

Boats like this can be relatively easy to build particularly if you go the stitch and glue route and aren’t too fussy about the finish – but they can more than repay the effort that goes into a more traditional construction and a good-quality varnish finish. They also row well and are a natural river boat, but must be used in fairly gentle wind and wave conditions.

My intention is to work up two or maybe more versions of this skiff based on the same basic hull – one will be a vanilla stitch-and-glue job that almost anyone might be able to build, while the other would have additional ‘gingerbread’ in the form of a more traditional build, more elegant seating arrangements, a shaped transom and so on.

See the whole series of posts on the intheboatshed.net skiff Julie – almost complete plans, our model, drawings for model-making, rough nesting, lines and initial drawings.

If a tender is what you’re planning to build, check out my Light Dinghy plans.

PS – It seems I’m not alone in cooking up a new set of plans. Check John Welsford’s site for what sounds like an interesting design project.

Don’t miss any thing good – SUBSCRIBE to intheboatshed.net below:

A double-ended 15ft rowing boat built by Adrian Morgan

[ad name=”intheboatshed-post”]

15ft double-ender built by Adrian Morgan

This Adrian Morgan boatbuilding project started with a message you don’t often hear: ‘We’re digging a lake, and building a boat house, and now we need a boat.’

A couple from West Sussex who wanted a 15ft rowing boat for their family. The delivery date was two weeks hence, May 2007, in time for a father’s birthday – but that was too tall an order, so the boat was delivered a year later, in time for his next birthday.

Adrian says: ‘The boat is essentially a scaled down version of my standard 18ft sjekte, with correspondingly more beam in relation to its length to create a stable boat that’s still easy to row.

‘The form is almost symmetrical fore and aft, with a bold sheer forward which sweeps up slightly at the stern. The price was around £4,500, finished clear varnished inside and outside, with a white bottom to set things off nicely. I have to say that the planking was a joy, the strakes almost made themselves, so sweet were the curves. They conformed almost effortlessly to the moulds, and there’s little or no tension anywhere, which promises longevity.’

See Adrian Morgan’s website.