Boatbuilder Adrian Morgan’s latest projects

Norwegian-derived 15ft boat designed by Adrian Morgan

Norwegian-derived 15ft boat designed by Adrian Morgan

15ft water ballasted small boat designed by Adrian Morgan for Loch Torridon

Stuck last week at home in the ice and snow like many in the UK, writer and Ullapool-based traditional boatbuilder Adrian Morgan got stuck into something he hasn’t done for a while – he sent intheboatshed.net some words and photos.

Naturally, I’m very grateful though I too could do without all that tedious white stuff.

In fact, it all got so bad for Adrian that he decided to start a very interesting weblog: The Trouble with Old Boats.

Here’s what Adrian has to say about the boat above:

‘This was launched in late summer for a client with a cottage on Loch Torridon. It’s built to my design developed from Norwegian original, but beamier and flatter-floored for more stability. She carries water ballast, so is light to tow and launch, but sits deeper for stability. She’s 15ft in length, and built of larch and oak with a standing lug.’

Guillemot rowing boat designed by Iain Oughtred and adapted by Adrian Morgan Guillemot rowing boat designed by Iain Oughtred and adapted by Adrian Morgan Guillemot rowing boat designed by Iain Oughtred and adapted by Adrian Morgan

Guillemot rowing boat designed by Iain Oughtred and adapted by Adrian Morgan Guillemot rowing boat designed by Iain Oughtred and adapted by Adrian Morgan Guillemot rowing boat designed by Iain Oughtred and adapted by Adrian Morgan

Oughtred Guillemot adapted by Adrian Morgan

And here’s what he has to say about this Iain Oughtred-designed Guillemot:

‘Built to replace a 12ft family dinghy that had been well used and loved for 40 years, this Oughtred Guillemot will be rowed on the choppy waters of the Firth of Forth. Stretched to just over 12ft from Iain’s plans for an 11ft 6in dinghy, she has enough length now to allow a rower forward and passenger aft, with another midships, or she can be rowed, swiftly, by one rower sitting centrally.

‘The planking followed Iain’s lines to the letter, once they emerged from below the waterline. Drawn for plywood, there was no way the garboards in larch could match the plywood’s width. I must admit to giving her a little more freeboard forward, as I was concerned she might dip her bow when fully loaded and punching into a head sea. I am not convinced I should not have stuck ruthlessly to Iain’s plans, but where’s the fun in building a one-off boat in solid timber if you can’t tinker a wee bit?

‘With her white-painted bilges, well protected against the rain water that is destined to fill her on her mooring, and varnished topsides, she is a simple, unpretentious little rowing boat of the kind once thrown up in their hundreds and thousands. The finish is smart, but not fussy. You can see your face in the transom, but a little wrinklier than for real. I hope she’ll last looking this good. If she lasts as long as her predecessor, then I will be happy – and in my 90s!’

Many thanks Adrian. I hope you enjoy your weblog as much as I enjoy this one!

If either of these boat tickle your fancy or even meet your needs, contact Adrian via his website: www.viking-boats.com

Lottery funds lerret oral history project

Gail McGarva Lerret Littlesea

Locals celebrate the launching of the newly built lerret Littlsea

Lyme-based traditional boatbuilder Gail Mc Garva and Lyme Regis Museum have won Heritage Lottery funding for a new project designed to enable people to learn and participate in the maritime heritage of the Dorset coast by exploring and sharing the story of the ancient local clinker-built lerret.

Titled Maritime Lyme and the Lerret, the project includes an oral history project that will collect, preserve and share stories connected with the traditional boats, and the material will be made accessible to the public online via a new website and in the form of a physical archive.

Also, 2011 will see a touring exhibition of the living history of the lerret with related community events. At the heart of this exhibition will be two lerrets, Vera, built in 1923 and the new boat Littlesea built by Gail in 2010 with funding from the Queen Elizabeth Scholarship Trust.

PS – I gather that Gail will be starting a project to build an impressive third rowing gig for Lyme in the autumn of next year.

Raids, Gartside designs, treenails, small dayboats and a Mirage drive in a homebuilt canoe – it’s all in the latest Water Craft

[ad name=”intheboatshed-post”]

Click here to order your subscription now!

A little late, here’s Water Craft editor Pete Greenfield’s summary introducing the November/December issue of his splendid magazine:

‘There have been small boat raids in Portugal, Scotland, Finland and the Netherlands, with similar events in Wales and France. This summer George Trevelyan and friends organised an English Raid on the Solent.

‘The English Raid attracted some fascinating craft from around Europe, including designer Andrew Wolstenholme’s and boatbuilder Colin Henwood’s deceptively simple 20’ (6m) gaff sloop Kite… which just flew

‘From Nova Scotia, our regular contributor Paul Gartside sends complete build her yourself plans and offsets for his traditionally built 16ft (4.9m) double-ended gaff sloop – just right for the next English Raid.

‘The Paul Gartside design which Ben Harris is building down in the deep West of England is a ‘proper project’: a classically-proportioned 30ft (9.1m) gaff-rigged cruising yacht inspired by Falmouth’s famous working boats.

‘You wait for ages for an article about treenails, then two come along. Nigel Sabin builds a clinker dinghy without glues or metal fastenings, and Topher Dawson enhances a St Ayles Skiff kit by fitting open gunwales.

‘Our Grand Designs series always introduces inspiring new boats. This time we have two. Selway Fisher’s sleek update of B B Crowninshield’s Dark Harbor keelboat and French designer Francois Vivier’s wholesome family dayboat Jewell, created for Maine boatbuilder Clinton Chase.

‘Plus pedalling the Avon in a Walt Simmons canoe with a Hobie Mirage drive; Ian Nicolson’s series on designing an eco-motorboat; tool and product reviews; and reports from the most active of the national associations.’

Click here to order your subscription now!