Category: Sailing cruisers

Sailing yachts used for cruising, or as cruiser-racers.

Will Stirling draws boatbuilding plans for a gentleman’s cutter of 1880

[ad name=”intheboatshed-post”]

Gentleman’s cutter Integrity in the style of an 1880 cruiser-racer, beautifully drawn by Will Stirling. Click on the thumbnails for a bigger image

Here’s a lovely piece of work: a set of drawings by Will Stirling for a forthcoming project to be built by Stirling & Son.  She’s a 43ft gentleman’s cutter of the period around 1880 drawn with careful reference to craft of that era including Nicholson’s Marigold, Beavor-Webb’s Partridge, GLWatson’s Vanduara, Dixon Kemp’s Zoraida and Fife’s Bloodhound. A cruising-racer, she can set 2,000 square feet of canvas in fine weather, yet Will says she will snug down to trysail and storm jib in poor conditions.

Click on the thumbnails above to see the lines and boatbuilding details more clearly. As you do, it’s worth reflecting that thay have been created without the aid of computer-aided drafting software – Will completed the whole drafting job the traditional and laborious way using ships curves and calculations. I have no doubt that her carvel-built wooden hull will be equally historically accurate from stem to stern.

Many thanks for this Will! I think Integrity is bound to attract some serious attention over the coming months, and I’m delighted to be able to give the boating world this preview.

Contact Will at http://www.stirlingandson.co.uk, tel 01822 614 259.

Humber sloop Spider T, rescued and restored by Mal Nicholson and friends

[ad name=”intheboatshed-post”]

Spider T today – click on the thumbnails for larger images

Spider T before restoration work began

Some people rescue old yachts while some adopt smaller craft – but perhaps the bravest are those who take on big old working boats. Mal Nicholson has restored the wonderful Spider T, a 62ft Humber sloop described as a ‘super sloop’ that  he now operates as a charter boat offering holidays and day trips out of Keadby Lock, near Scunthorpe. See the Spider T website.

Spider T was launched in 1926, and was one of two similar craft built at Warrens Yard at New Holland. I’ll let Mal take up the story:

‘Her sister ship was the Zenitha, as we recently learned with the help of Peter Warrens, of the Warrens Shipbuilders dynasty. We recently welcomed him on board with his wife Marjorie and his two sons, and he has taken the Spider T to his heart, and we talk now on a frequent basis and much more information is coming together.

‘He recently told me that Spider T & Zenitha were designed by his uncle Frederick Warren just before he died, and that they encompassing everything they knew about hull design, I suppose that is why they were labeled ‘super sloops’.

‘His father and grandfather built the Spider T. She is 70.4 gross cargo tons, and was launched as Spider T for captain JJ Tomlinson for whom she was the pride of his fleet. The name Spider was his nephew’s nickname, while the T stood for Tomlinson.

‘I have all the documentation for her including the plans and registration documents showing her registered as a ship. She has always been referred to as a ship by her past masters, one quite famous old master was George ‘Buck’ Harness. George told me at the age of 92 that she was not a barge or a boat but a ship, and asked if I knew the difference? ‘No,’ I replied. ‘Well, ship is short for a shipment, which is a vessel that is capable of taking in excess of 100 tons to sea!’ So that was me put straight very early on in my tenure!

‘Many years later I discovered what he said was absolutely correct, as I found her registration documents, and there it was in black and white: she was registered as a ship number 149049, yard number 216.

‘Unfortunately the Zenitha no longer exists, but I have spoken to the son of the original owner and apparently she was very fast and came 2nd in the 1928 Humber Reggatta. He has sent me some details of vessels and owners.’

In recent years, Spider T has been restored, refloated and re-rigged for the first time since the 1930s, and her crew have sailed to Scotland and Holland, and have chalked up some notable achievements. She was the first vessel from the National Historic Fleet to attend the World Port Festival in Scarborough, and was the first Humber sloop to cross the North Sea directly since before World War II. I have a sense that there’s more of this story to come, so I hope Mal will keep me informed!

And, finally, I’d like to put out a message from the management. This post about Mal keeping Spider T alive is just the kind of story we like to put up here at intheboatshed.net. If you have a story about an old boat, traditional boatbuilding and design, boat restoration, boat history or even a modern boat with traditional features you would like to share, please let us know at gmatkin@gmail.com.

A Joel White Haven 12 1/2 launched at the Boatbuilding Academy

[ad name=”intheboatshed-post”]

John  Watson and Dave Snelling’s 12 1/2 Haven on student launch day in December

John Watson and build partner Dave Snelling built the Joel White Haven 12 1/2 version of Nat Herreschoff’s 12 1/2 Buzzard’s Bay Boy’s Boat during their course at the Builtbuilding Academy, reports principal Yvonne Green.

While the original design has a full keel, the Joel White version has a centreboard, making it possible to bring the boat into  shallow waters and easier to trailer. The boat is Douglas fir strip planked and sheathed in glass fibre, has a cast lead ballast keel, and is 15ft 11in in length with a beam of 6ft 1in.

Neither John nor David were doing practical work before they came on the course at Lyme – for the last thirty years John has worked in corporate law in America, while Dave, although he worked in the marine industry at the beginning of his career, has been working in IT. Yvonne says the boat was quite an achievement, but John and Dave were incredibly focused on the course and worked steadily to complete it in the six months they had on the main workshop floor.