Keble Chatterton on the early development of racing yachts, part I

[ad name=”intheboatshed-post”]

King Charles II's yacht Mary

King Charles II’s yacht Mary. Progress in the developments of yachts remained slow until after Waterloo

‘I’m still reading Keble Chatterton’s entertaining if possibly dodgy history Fore and Aft Craft, and I thought intheboatshed.net readers might be entertained by his account of yacht racing’s development during the 19th century. It comes, of course, from an early 20th century perspective.

‘Among the famous yachts of the ‘twenties must be mentioned the Pearl, the Arrow and the Alarm. These were all built as cutters. The Pearl was launched in 1820 at Wyvenhoe and was of 95 tonnes. The Arrow was 84 tonnes. She was altered and rebuilt many times since she first appeared in 1822. The Alarm, which came out in 1830, was only seven tons short of two hundred, and was one of the very largest cutters ever built. What a gybe must have been like round a mark-boat in a smart breeze we can well wonder. Her origin is not without interest, for she was designed from the lines of a celebrated smuggler that was captured off the Isle of Wight.

‘It was owing to the fact that no time allowance was granted that the development of size in yachts had gone on unchecked: otherwise such a monstrosity as the Alarm would not have appeared. Right away as far back as Charles II the English yachts had been ballasted with shot. It was suggested to Christopher Pett that stones should be used for this purpose, but he wisely declined to entertain such an idea on the ground that it took up too much room. In this respect, Pett was more ahead of his time than might appear, for the ocean-going ships had for centuries had a considerable amount of their valuable internal space taken up by gravel ballast, which left but little room for the ship’s stores.

‘In some of the early nineteenth century yachts gravel or stone blocks were still used, just as one still finds to this day in the case of some of the open fishing craft which go out from the shore to their lobster pots. After that, iron blocks were introduced, and finally a reversion to the idea of lead. Bags of shot were employed in the last century so that they could easily be moved up to windward at each tack. In 1846 lead pigs were used, and finally, ten years later, in spite of the frownings of pessimists, the lead, instead of being used as inside ballast was transferred to the keel outside.’

‘After the battle of Waterloo the sport of yachting and so the development of yacht architecture and everything connected with the yacht from ballast to running gear, received the advantage of an enthusiasm which had never previously been granted: and both immediately before and after the Crimean War this enthusiasm and interest had been increased tenfold. It was because there had been so little personal interest on the part of the owner, such scant encouragement given to the builder, such universal ignorance in regard to problems of naval design, such infrequent races for testing certain types of hull and rigs, that the progress since the introduction of the first Mary into our country had been slow.’

And then:

‘But now all this was changed. The Victorian sovreignty had brought about peace and contentment, and the effects of the great industrial revival of the previous century had already caused so much increased wealth to our countrymen that there was an unprecedented army of rich sportsmen from whose ranks to draw a large band of yachtsmen. Here then was the needful force of encouragement to builders. This was intensified by the formation of powerful yach clubs having for their object, as the preamble to almost every yacht and sailing club reads, “the improvement of yacht building and the encouragement of yacht sailing”, “giving the greatest latitude in the construction, rigging and sailing of vessels, consistent with their aptitude to yachting.’

To be continued…

Amazon has original hardback copies of an earlier edition of Keble Chatterton’s book, Fore And Aft, The Story Of The Fore & Aft Rig From The Earliest Times To The Present Day, and also scanned copies of Fore & Aft Craft and Their Story; another relevant book that looks particularly interesting in this connection is Lennarth Petersson’s book Rigging: Period Fore-And-Aft Craft, which describes the rigging of three 18th century vessels in detail – an American schooner, an English cutter and a three-masted French lugger, and includes some 200 diagrams.

BBA Academy students build and launch a Beer beach boat

[ad name=”intheboatshed-post”]

Beer lugger 'Steadfast' at sea off North-West Scotland Alasdair Grant

Beer beach boat Steadfast at sea off North-West Scotland

Beer beach boat Steadfast Beer beach boat Steadfast

Beer beach boat Steadfast Beer beach boat Steadfast

Beer beach boat Steadfast on launch day

Another craft launched in July by Boat Building Academy students was a 16ft 5in Beer beach boat, built to lines taken from a boat on the beach at Beer, Devon, by one of the students, Alasdair Grant.

The youngest student in the Boat Building Academy’s Class of September 2009, Alasdair first contacted the academy when he was 14. Four years later at the end of his course he was given a special BBA award in recognition of his outstanding dedication and hard-work during the build of his aptly-named boat Steadfast.

The award was a brass plaque reading ‘Made in England’. Alasdair, it should be understood, is a proud Scot – so I hope he appreciated the well meant joke…

Alasdair is from a fishing family in Aultbea in the North West Scotland, and wanted to build a working boat. After seeing and taking the lines from the Beer beach boat, Alasdair brought some his own Scottish influence to the construction, including very heavy framing.  He and another student building the boat, Jim Walsh, went on to include seven big frames in the build and the finishing touch, and Scottish-style tyres for fenders.

Steadfast is now being used by his family as their water taxi to and fro the Scottish mainland and the Isle of Ewe, and is said to have coped well in recent gales.

Since graduating in June, Alasdair has began work with Cockwells in Cornwall.

A classic work on the beach boats of Britain is this book: Beach Boats of Britain.

More on Nick Smith’s latest motor launch

[ad name=”intheboatshed-post”]

Nick Smith has written in with some more photos of his current project, which he’s given the working title of Bamboo Viper II, because she’s very much like an earlier boat he built by the same name – you can see earlier posts here and here. Here’s what he says about his preparations for putting in the ribs.

‘BV II is now planked up, primed inside so the frames have paint behind them and less likely to rot out the contact faces between rib and plank. I have located some good New Forest oak and have machined that up ready at 15/16ths of an inch by 9/16ths.

‘I have had to pick and choose to avoid knots,short grain and sap, and despite that usually allow an extra 25 to 50 per cent extra for breakages anyway. It’s a nuisance to run short then have to machine and steam a second batch or even just an annoying one or two to finish off.

‘The oak is ‘green’ – that is wet almost straight from felling. It steams better having moisture inside, and in the meantime the ribs are wrapped in wet cloth and then polythene on the outside until they are ready to go in the steam box.

‘The cost of the material is around £200! English oak isn’t cheap, and amazingly kiln-dried American white oak is cheaper!

‘It’s getting ever more difficult to get hold of all three key components – seasoned planking timber, good oak and copper fastenings. The price of copper has rocketed in the last two or three years.

‘I’ll send some photos of the steaming out process and the planked and framed hull when it’s done – it’ll be a couple of weeks yet. Meanwhile I have jumped ahead a stage or two and machined the gun’ls and risers ready to go in on top of the frames.

‘Cheers

‘Nick’

Nick comes from Devon, learned boatbuilding the traditional way and specialises in new builds in clinker and carvel for sail, motor and rowing power from 8ft to 28ft with a special emphasis on West Country style and design, and also takes on repairs and refits from 25ft to 50ft. These days he’s based in Hampshire, and can be contacted by email at nick_smith_boatbuilder@yahoo.com and by phone on phone on 07786 693370.

Want to learn more about boatbuilding using the clinker technique? Try John  Leather’s book Clinker boatbuilding at the revived intheboatshed.net A-store.