The boat that didn’t quite win the boatbuilding competition at Beale Park this year

[ad name=”intheboatshed-post”]

Francis Rayns’ handsome 10ft pram dinghy built to plans by John Gardner.

(Click on the images for a larger view)

Francis Rayns clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

It says a lot for the standards of the Watercraft magazine Amateur Boatbuilding Awards that this very nicely made little boat only came second this year.

True, one might complain that the material of the clinker strakes is perhaps a little slender, and tradititionalists might suggest that the  knees could have been grown rather than laminated – but these seem to be small issues when set alongside the near-flawlessness of the work.

What’s also notable about this particular boat is that builder Francis Rayns reports that the materials cost came out at just £250 – I think that’s an appealingly low figure for such a handsome 10ft boat. She’s built in larch on oak with copper fastenings, by the way, and Francis built her to plans drawn after Nathaniel Herreshoff by John Gardner and published in his book Building Classic Small Craft.

If you haven’t got Building Classic Small Craft, I strongly recommend it – in addition to this little classic, the book contains plans for 46 other boats for a price less than £13, and a long section on boatbuilding techniques. You can’t buy much for that little money these days, but this book is a real bargain.

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Francis Rayns\' clinker-built dinghy at the Beale Park Thames Boat Show

Nick Smith’s handsome clinker-built boats at the Beale Park Thames Boat Show

[ad name=”intheboatshed-post”]

Nick Smith traditional boatbuilder at Beale Park Thames Boat Show

Nick Smith traditional boatbuilder at Beale Park Thames Boat Show 2008

Nick Smith traditional boatbuilder at Beale Park Thames Boat Show 2008

Nick Smith’s boatbuilding work at the Beale Park Thames Boat Show.  If you
ring him, this is now the preferred telephone number:
0778 6693370

I’ve had another frantically busy week, so I’m afraid it’s taken me a little while to get these first photos from the Beale Park Thames Boat Show up.

In fact, I haven’t a huge amount to say about these photos of Nick Smith’s very nice work, so I’ll leave the pictures to tell their story.

Nick tells me that he builds these craft because he was brought up using similar craft, and that he learned his trade in a long-closed boatyard at Salcombe.

Apparently the historic old place is being developed for housing. In an  expensive place like Salcombe, I guess that someone is about to make a killing even in these times, but Nick’s certainly less than happy about the loss of the old yard. I can remember the place he’s talking about, and rather agree with him.

I’d also like to thank Nick for his kindness in taking us under his wing at the show this year – he has a lot to share about traditional boats and boatbuilding and I’ve a lot to learn, so I’m looking forward to having the chance to listen to him again soon.

Nick Smith traditional boatbuilder at Beale Park Thames Boat Show 2008

Nick Smith traditional boatbuilder at Beale Park Thames Boat Show 2008

Nick Smith traditional boatbuilder at Beale Park Thames Boat Show 2008

Nick Smith traditional boatbuilder at Beale Park Thames Boat Show 2008

Nick Smith traditional boatbuilder at Beale Park Thames Boat Show 2008


A pretty double-ended skiff seen at the Beale Park Thames Boat Show

[ad name=”intheboatshed-post”]

Small double-ended skiff at the Beale Park Thames Boat Show

Small double-ended skiff at the Beale Park Thames Boat Show

Small double-ended skiff at the Beale Park Thames Boat Show

A double-ended skiff that could have been built from the
pages of Practical Boatbuilding for Amateurs

I’ve got lots of photographs from the Beale Park show, but with lots of work to do and a musical engagement I’ve had precious little time to put them up. In fact, I’ve very little time now, but I thought I should quickly share these shots of what was probably my favourite boat from the show – a little double-ender that could easily have been built from the pages of a book I scanned and posted here some time ago, Practical Boatbuilding for Amateurs.

Although it was on the International Boatuilding Training College’s stand, there was sadly no information about the boat’s history, or anything to explain the reason for the double-ended shape, or anything about how it performs on the water. And all their people were so busy I didn’t want to interrupt them!

Nevertheless, I think it’s a real sweetheart and if I was half clever enough, I’d want to build one just like it.

For more information, click here for the freely available plans. As I’ve said before, if anyone builds this little boat I would be delighted to hear about the project.