John Leather New Blossom small cruiser built and launched at Faversham

[ad name=”intheboatshed-post”]

p4090079

p4090063 p4090076 p4090030

p4090034

Horatia, built at Faversham to a John  Leather design.
Click on the pictures for larger photos

Bob Telford has kindly passed me these photos of the launch and building of Horatia, Mike Terry’s pretty new boat built at Alan Staley’s yard at Faversham to John Leather’s New Blossom plans. Thanks Bob and congratulations Mike!

She is built from epoxy bonded plywood, sealed with epoxy and traditionally painted.

John Leather, who passed away in 2006, is much missed, not least for his advocacy of old-style boatbuilding and boats through many, many articles and books, and also for his design work. It’s fair to say that his influence has been huge in the traditional boats and boatbuilding world – for a flavour see this notice from the Classic Boat folks.

For more on Leather, read boat builder Jamie Clay’s obituary at the Albert Strange Association website.

Alan Staley can be contacted at 01795 530668, alanstaleyboatbuilds@dsl.pipex.com.

pc060007 pc060006 p4010054

p1290008 p1290005 p4010041

p4010055 p4010040

Don’t miss something good. Subscribe to intheboatshed.net’s weekly update!


Motor launch Louise is ribbed out

[ad name=”intheboatshed-post”]

2009_0425louise-ribs0024

2009_0425louise-ribs0017 2009_0425louise-ribs0031 2009_0425louise-ribs0032

Louise gets her new ribs

Hampshire-based and Devon-trained boatbuilder Nick Smith has sent us some more photos of his current 16ft clinker-built motor launch project, Louise. This time he’s steaming and fitting her ribs, a process that would be recognised by boatbuilders going back many centuries.

‘Hi Gav

Louise is now ribbed out: the oak timbers, approxiamately 3/4  by 5/8in went in the steam box when steam was up, and cooked for the best part of an hour – the rule of thumb is an hour per square inch cross section, but it depends on the moisture content. ‘Green’ – almost straight off the tree – is best.

An hour and three quarters later we were done, including a beer break to put the second batch in the box.

The next job is to rivet all the copper nails , then gunl’s, risers, knees, breasthook and engine beds.

I went to the Beaulieu Boat Jumble yesterday and picked up, among other things, a period pattern matching pair of bronze fairleads, likewise a foredeck cleat, a bronze bilge pump and deck filler fitting, all to match the era of the design.

Thats it for now, more in a couple of weeks.

Nick’

Thanks Nick – I really like to see these projects progressing.

Click here for an earlier post about this project. If you don’t already know him, Nick comes from Devon and specialises in new builds in clinker and carvel for sail, motor and rowing power from 8ft to 28ft with a special emphasis on West Country style and design, and also takes on repairs and refits from 25ft to 50ft. He can be contacted by email at nick_smith_boatbuilder@yahoo.com and by phone on phone on 07786 693370.

For some photos of Nick’s boats at last year’s Beale Park Thames Boat Show, click here. Nick tells me he’s be at the show again this summer, so if you’re interested it might be wise to put the dates 5th-7th June in your diary…

Don’t miss something good. Subscribe to intheboatshed.net’s weekly updates.

Hudson folding dinghy for sale

[ad name=”intheboatshed-post”]

027

030 031

Hudson folding dinghy

Dave Eastwood has a Hudson folding dinghy for sale and says he is looking for offers in excess of £250 – which seems modest for such a nice collector’s piece. I’d like to think someone – or some museum – will be keen to preserve this boat.

For a previous post showing the Hudson folding dinghy in use, click here.

Contact Dave at jendave.one20@ntlworld.com.

Have you got an interesting boat for sale, or that you would like to tell us about? Contact intheboatshed.net at gmatkin@gmail.com.