The first St Ayles skiff makes rapid progress and looks handsome!

[ad name=”intheboatshed-post”]

St A Skiff 266

St A Skiff 262 St A Skiff 277

The St Ayles skiff takes shape in Alec Jordan’s workshop

I’m delighted to be able to report that our friend prize-winning amateur boatbuilder Chris Perkins has regained his usual confidence and interest in plywood lapstrake boatbuilding.

Chris’s standards are high, and a recent stitch and glue project left him feeling a little down – not I think because there was anything wrong with the project itself, but because it  just wasn’t Chris’s kind of project.

What’s brought the old passion back has been spending time in boat kit supplier Alec Jordan’s workshop, where he’s been working on the first St Ayles skiff.

The St Ayles skiff is a new Iain Oughtred design intended for use as part of the Scottish Coastal Rowing Project, which aims to inject new life into the sport of competitive rowing  on the sea in Scotland, rather in the same way that gig racing has taken hold in the South-West of England and beyond. There’s more about this project at intheboatshed.net here and a post about Alec’s initial model here. There will be more coverage in an upcoming edition of the excellent Water Craft magazine.

You can follow Chris’s reports on the project’s progress at his weblog: http://strathkanchris.wordpress.com/ . In the meantime, I though intheboatshed.net readers might be interested to read what Chris has been saying about the project this week:

‘It’s the end of week 2, and the hull is fully planked up. The whisky plank went on on Thursday afternoon but we were too knackered to celebrate appropriately!

‘Keel and outer stems should be on by close of play Monday next and off the mould and right way up very soon thereafter. If Cromartie Timber have done their stuff by the time I head south at the crack of dawn on Monday I will be taking some very nice larch down for the thwarts and their support beams (good and strong so that larger rowers can be accommodated without fear of breakage) so that we can install them during the week.

‘The inwale and breasthook timber is already in the workshop so given a fair wind the structural work should be just about done by the end of week three. Then it will be just a bit of a paint job and then we’ll throw it in the water for a propulsion test – any volunteers?

‘The biggest delay the build is facing (and it’s a very satisfying cause!) is the stream of interested groups and individuals dropping by to see how she is coming along – there is a real buzz about this project locally and it seems to be developing a momentum of it’s own. If all the enthusiasm turns into boats, then the Firth of Forth may well have a spectacle on a par with the gig racing of the South within the next year or so.

‘I’ve included some snaps of the fully planked hull this morning – I think they say a lot about how pretty this design is turning out, and how very slippery she will be.

‘Cheers, Chris’

Don’t miss something good – subscribe to intheboatshed.net’s free weekly email newsletter now!


Marcus Lewis’s boats take the lead in racing at Cornish regattas

[ad name=”intheboatshed-post”]

polruan regatta 018

Fowey River dinghy No 54 Four Brothers sailing around before the start of the Polruan Regatta held on Bank Holiday Monday

Fowey boatbuilder Marcus Lewis has sent me this photo from Cornwall to mark a series of outstanding successes in local regattas.

After a week at Fowey Regatta in which she won three out of seven races ande claimed the Overall Cup for Fowey River dinghies, Four Brothers also raced to victory in the Polruan Regatta, in which she snapped up the Silver Cup.

In one race during Fowey Regatta No 54 was challenged by Marcus and Johnny Nance in No 53 Kingfisher but Four Brothers leapt into the lead on the last lap and took the winners gun.

Both boats were built by Marcus at his workshop in Fowey and were launched this year. See Marcus’s website: http://www.woodenboatbuilder.co.uk

Marcus is currently restoring a Mevagissey Tosher built by Percy Mitchell, and I understand the refurbished boat will be for sale.

Small motor launch Louise built by Nick Smith complete but for her varnish

[ad name=”intheboatshed-post”]

DSCF3933

DSCF3929 DSCF3947 DSCF3937

DSCF3961 DSCF3965

Hampshire-based boatbuilder Nick Smith wrote this week with photos of his current motor launch building project Louise. Here’s what he has to say:

‘Louise will be launched in the spring, as the owner will be doing the varnishing over the coming months. Normally I would be a bit reticent about this, but having seen my customer David Eschbaeschers’ varnish work and woodwork on his steam launch I was confident she would be finished to a high standard that would be as good as I would do it.

‘Louise to my eye has a more ‘motor dinghy’ look than the last project, Lisa, which is more ‘motor launch’ – the one foot difference in overall length has seen to that, together with the fact that Louise is narrower and has a flatter sheer.

‘I’m very pleased how she has come out and so are the owners, they will be dry sailing the boat and go all over the country’s rivers and estuaries through the season.

‘Thats it for now. After a break I will be starting a restoration job on a 15ft clinker launch my oppo found under an oak tree at Beaulieu. So will keep you posted on that one.

‘Nick’

Nick wrote again a couple of days later with a photo of Moiety, a boat he built 17 years ago.

‘Moiety’s owner has sent me these pictures of the boat at The Thames Traditional Boat Rally at Henley this year. I originally built and planked Moiety in 1992 and fitted her out six years later, so she was completed in 1996, so the hull is 17 years old but the completed boat only 13 years old. She is 16 foot 4 overall with a beam of six foot four, and a lot of boat for her length.’
IMG_1090
Moiety at this year’s Thames Traditional Boat Rally
Thanks Nick – I’m looking forward to hearing about the restoration job.

For more photos of Louise during her build click here.

For photos of the previous build Lisa click here.

Nick comes from Devon, learned boatbuilding the traditional way and specialises in new builds in clinker and carvel for sail, motor and rowing power from 8ft to 28ft with a special emphasis on West Country style and design, and also takes on repairs and refits from 25ft to 50ft. These days he’s based in Hampshire, and can be contacted by email at nick_smith_boatbuilder@yahoo.com and by phone on phone on 07786 693370.

Don’t miss something good subscribe to intheboatshed.net’s free weekly email newsletter now!