Tiernan Roe starts work on a Karl Stambaugh Catbird 16 small cruising sharpie

[ad name=”intheboatshed-post”]

Tiernan Roe, South-West Ireland, boatbuilder, John Atkin, Ninigret, Wooden Boat magazine, Karl Stambaugh, Catbird 16, Galway Bay, WP Stephens, canoe yawl, roeboats, weblog

It may not look like much at the moment, but this is the very beginning of a new project for Tiernan Roe. Tiernan is a South-West Ireland-based boatbuilder who has recently received a huge amount of positive coverage for a beautiful John Atkin-designed Ninigret 22 he built for a client.

The acclaim has come from quite a variety of sources, including the hard to please Wooden Boat magazine.

Here’s what Tiernan has to say:

‘Just thought you might like to know what I’m up to at the moment. I’ve started building a Karl Stambaugh-designed Catbird 16 cruising sharpie for a client to use on Galway Bay.

It’s to be a ‘sailaway’, as they say – so the client will be doing the rigging and painting. Oh joy!

I’ve attached a few photos of setting up the frames, and I’m hoping to do a bit of a stop motion video when I’m finished and when I get the time.

I hope all is well with you. As always I’m enjoying intheboatshed – only last night reading I was reading about canoe yawls in WP Stephens’ book, and now all I have to do is find a client who wants one.

Anyway if you have any queries etc. don’t hesitate to contact me.

Regards,

Teirnan’

Click here for Tiernan’s weblog. For  information about Karl Stambaugh’s Catbird 16, click here.

Gadfly II is back on the water – but has anyone got any unwanted iron for ballast?

[ad name=”intheboatshed-post”]

blackwater sloop,  gadfly II,  gaff cutter,  iron ballast,  simon papendick,  whitstable

blackwater sloop,  gadfly II,  gaff cutter,  iron ballast,  simon papendick,  whitstable

Whitstable-built Blackwater sloop lookalike Gadfly II is afloat once again after a period of restoration, reports boat builder and repairer Simon Papendick. Here’s what he says about the East Coast gaff cutter’s progress:

‘It has been a hard over the last few months, but I have finally got Gadfly II back in the water. After a few days of all hands to the pumps, she is now all but watertight.

I took her for a sail the other day and it was good to get her underway with new sails. The boat felt good and so did I after all the hard work I’ve put  in over the past three years.

The only problem I have now is working out how much internal ballast she is going to need to get her to sit on her lines and not be so lively. So far I have put in 300kg of ballast, which has made things better – but she is still way above her lines, so possibly I will have to find about another 300kgs. I think that should just about do for the moment.

So if any of the readers know or have any old iron they want rid of that I can pick up and use please I would be most  grateful!’

Well done that man!

Simon runs a boatbuilding and restoration firm (J-Star Boat Services) and a sailing school (J-Star Sea School), so if you have any suitable ballast please contact him directly via his business websites.

Perhaps of particular interest to intheboatshed.net readers are some small boat maintenance workshops Simon is running designed to help boat owners to increase their knowledge and do small jobs themselves. These start form removing seacocks to replacing boat windows and anything in between. They are run on a
weekly basis on a four:one basis. Contact Simon on 07799401650 or email simonpapendick@btconnect.com.

Boat Building Academy students launch a 14ft rowing skiff with wooden fit-out

[ad name=”intheboatshed-post”]

Boat Building Academy, Jon Palmer, Ben Larcombe, Justin Adkin, glass-fibre construction, wooden fit-out, Atlantic Rowing Race, Beale Park, Thames Boat Show, BBA, David Johnson, Wessex Resins, Sliced Bread, Ian Thomson, Nestaway, sectional dinghies

Boat Building Academy, Jon Palmer, Ben Larcombe, Justin Adkin, glass-fibre construction, wooden fit-out, Atlantic Rowing Race, Beale Park, Thames Boat Show, BBA, David Johnson, Wessex Resins, Sliced Bread, Ian Thomson, Nestaway, sectional dinghies Boat Building Academy, Jon Palmer, Ben Larcombe, Justin Adkin, glass-fibre construction, wooden fit-out, Atlantic Rowing Race, Beale Park, Thames Boat Show, BBA, David Johnson, Wessex Resins, Sliced Bread, Ian Thomson, Nestaway, sectional dinghies

Built by Boat Building Academy class of September 2009 students Jon Palmer and Ben Larcombe, this 14ft rowing skiff was designed by Justin Adkin.

Justin’s design gave Jon and Ben an opportunity to explore glass-fibre construction with a wooden fit-out.

Before the course Jon worked as a product designer, and Ben held down a variety of jobs ranging from snowboarding instructor to pattern-making apprentice. Both were looking to learn practical skills that would broaden their horizons in woodworking and boat building.

Unfortunately for Jon and Ben, rowing athlete Justin (he won the 05-06 Atlantic Rowing Race) broke the foot-rest while testing the boat at the Beale Park Thames Boat Show just before the BBA student launch day – but  Ben and John were back in the workshop working on the boat by Sunday evening after the show, and the boat was ready in time for the big launch.

I gather Justin hopes his new design will provide the basis for a new rowing racing class – but more generally says that it’s designed for short- to medium-length coastal regatta rowing races. The design was carved from a block, lines taken and lofted, and is loosely based on Whitehalls and flashboats, but with fuller forward sections to help it to lift when rowing on the open sea. The result is not as tippy as a flashboat, say the BBA folks, but still a test to row. Justin has recently built a fixed-seat version, which he says is very quick.

Visiting the Boat Building Academy David Johnson of Wessex Resins commented on the excellent design and told Justing he should call her Sliced Bread because, he said, ‘it had to be the best thing since’. The name may have stuck.

Since finishing the course Ben and Jon are setting up a workshop working with Ian Thomson (BBA graduate in June 2008) whose company’s Nestaway sectional dinghies have taken off.  Meanwhile, Ben and Jon have been asked to quote for building a traditional rowing boat and another of the Sliced Bread skiffs.