Category: Small boats

The September/October issue of Water Craft magazine will be out soon

[ad name=”intheboatshed-post”]

Water Craft magazine September October

Editor Pete Greenfield has sent us his preview of the September/October issue of Water Craft magazine.

Click here to subscribe to this excellent publication!

Here’s what he says about the next issue:

‘In our September/October 2010 issue – in good newsagents from 26 August – you’ll find….

•Some 16 years designer Nigel Irens launched his radical 30ft (9m) lugger named Roxane. Now Dick Phillips has built a not-so-conventional gaff-sloop version in wood and Peter Goad has sailed her….
•Did you see the BJ17 at the Beale Park Boat Show? Bart Jan Batts asked Nigel to redesign his 3-masted 17’ (2.2m) King Alfred School Expedition Boat– with a Roxane-style lug rig. Kathy Mansfield sailed her.
•And talking of 17-footers, Alice Driscoll says the new water-ballasted BayRaider 17 from Swallow Boats is two boats in one.
•Designer Paul Gartside presents home builders with full plans and offsets for an easy-to-build 9ft (2.74m) tender.
•It’s less than a year since Alec Jordan launched his first kit-built 22ft (6.7m) St Ayles skiff for the Scottish Coastal Rowing Project. Now as many as 22 are in build, and six community groups have completed – and raced – their own boats.
•And, talking of Scotland, did you know that when Robin Hood wasn’t up there riding through the glen, he was surfboating in Wales? We didn’t either. And when Ridley Scott’s new film Robin Hood needed a fleet of mediaeval surfboats, Mark Edwards’ Bridge Boathouses had to make them without chopping down Sherwood.

Plus the best of the Beale Park Boat Show, Water Craft’s own Amateur Boatbuilding Awards and all our regular features.’

Once again, Water Craft offers excellent value – the tender plans alone will be worth ten times the cover price. Get your subscription now!

BBA students launch racy Wolstenholme Mallard dinghy

[ad name=”intheboatshed-post”]

andrew wolstenholme , boat building academy , dinghy , dominic frankis , epo,y ply , glued clinker , Lyme , mallard , mallard dinghy , steve bramley , students

andrew wolstenholme , boat building academy , dinghy , dominic frankis , epo,y ply , glued clinker , Lyme , mallard , mallard dinghy , steve bramley , students andrew wolstenholme , boat building academy , dinghy , dominic frankis , epo,y ply , glued clinker , Lyme , mallard , mallard dinghy , steve bramley , students

Another boat launched at Lyme Regis Harbour by Boat Building Academy students this summer was an Andrew Wolstenholme-designed 12ft 5in glued clinker Mallard dinghy.

Named Born Slippy, she was built by Dominic Frankis and Steve Bramley, along with other students.

Dominic took a sabbatical from work in London as a management consultant in the health sector. He’s never sailed before but now has no excuse. Now back behind his desk, he also says it’s only a matter of time before he’ll be boatbuilding again.

Steve worked as a tree surgeon and builder before joining the course, and is now using the skills he gained on the course to renovate a house.

The Mallard should prove to be a lot of fun; the rigging is more modern than is usually employed on these Mallard dinghies, which the Boat Building Academy folks say makes it quite a racy little sail boat.

Nick Smith starts planking his latest 20ft motor launch project

[ad name=”intheboatshed-post”]

boatbuilder, clinker, fishing boat, motor launch, Nick Smith, planking, west country, Wooden Boatbuilders Trade Association, WBTA

boatbuilder, clinker, fishing boat, motor launch, Nick Smith, planking, west country, Wooden Boatbuilders Trade Association, WBTA boatbuilder, clinker, fishing boat, motor launch, Nick Smith, planking, west country, Wooden Boatbuilders Trade Association, WBTA boatbuilder, clinker, fishing boat, motor launch, Nick Smith, planking, west country, Wooden Boatbuilders Trade Association, WBTA

boatbuilder, clinker, fishing boat, motor launch, Nick Smith, planking, west country, Wooden Boatbuilders Trade Association, WBTA

Nick Smith’s building a new copy of the 20ft motor launch Bamboo Viper he made some time ago.

The latest boat is for a customer who lives on Hayling Island and will be 20ft 4in overall. She will have a Yanmar 15Hp inboard, and khaya mahogany planking on New Forest oak.

The earlier photos reveal how he set out the plank runs for the new boat, while the rest show planks going into place – in another few days it will be time to get his gang together to steam out the ribs.

But first he’ll have to drill holes for the rib nails, mark the bilge level inside, prime the inside, spike the nails, and get a good stock of straight-grained knot-free green oak for the frames, and, of course, set up the steam box.

The photo of Bamboo Viper below shows what the finished boat will look like.

Nick Smith west country style motor launch Bamboo Viper

Bamboo Viper built by Nick Smith – the new boat will be very similar

Click here for more posts relating to Nick’s impressive old-fashioned motor launches.

Nick, who is a WBTA member, comes from Devon, learned boatbuilding the traditional way and specialises in new builds in clinker and carvel for sail, motor and rowing power from 8ft to 28ft with a special emphasis on West Country style and design, and also takes on repairs and refits from 25ft to 50ft. These days he’s based in Hampshire, and can be contacted by email at nick_smith_boatbuilder@yahoo.com and by phone on phone on 07786 693370.