Nick Smith planks up Louise – and uses a novel steaming technique

[ad name=”intheboatshed-post”]

2009_0301louise1stmarch0008

2009_0301louise1stmarch0013 2009_03094planks0004

Planking Louise: Nick uses an on-the-spot steaming
device for the garboards

Hampshire-based boatbuilder Nick Smith is currently planking up a new project, Louise. She’s  a 16ft loa, 6ft beam and will draw about 14in, and built with khaya mahogany planking.

She’s destined for customers in Newton Ferrers,  and won’t be kept on a mooring but will be dry sailed on estuaries and rivers. Her internal layout will be identical to  Nick’s last project Lisa but compared with that boat she will be smaller and more lightly built for ease of launching and recovery, and with finer ends and a flatter sheer.

She’ll have an 11hp Vetus twin diesel installed.

Nick has kindly sent us these photos illustrating his method of steaming garboards and often the first couple of planks in situ using a piece of old inner tube.

The arrangement here looks a bit Heath Robinson – it uses an old thinners tin with an old style kettle element in it – but Nick says it’s very effective and he also uses it to steam frames.

My suggestion, gentle reader, is that it might be a bit scary for most of us to try at home, unless you happen to have the skills of an electical engineer! I’d guess that a big, stable two-ring camping stove would be safer.

However, steaming on the spot is obviously a very neat trick. Nick says: ‘I can’t think who invented this method but I’ve not seen anyone else do it. It’s very effective, however: in the old days the boy would run with the hot plank from the steam box to the boat, but by the time he got there the board was almost cold. But this way the plank is in place already: you just slide the inner tube off, and cramp the hood end up in place.’

Click here for posts mentioning Nick’s previous project, Lisa. If you don’t already know him, Nick comes from Devon and specialises in new builds in clinker and carvel for sail, motor and rowing power from 8ft to 28ft with a special emphasis on West Country style and design, and also takes on repairs and refits from 25ft to 50ft. He can be contacted by email at nick_smith_boatbuilder@yahoo.com and by phone on phone on 07786 693370.

Food for thought from the WBTA survey traditional boat enthusiasts’ buying habits

[ad name=”intheboatshed-post”]

Nick Smith traditional boatbuilder at Beale Park Thames Boat Show 2008 Rowing gig Young Bristol sees some action
The launch of the John Nash skiff dscf5402

Boat builders’ projects featured at intheboatshed.net. From left to bottom left: Nick SmithWin Cnoops and the Slipway Collective, Will Stirling and Fabian Bush

Traditional-style boat buyers are life-time enthusiasts who seem to buy a ‘fresh’ boat every three to five years.

This maybe because their life circumstances change often enough to require a different boat, because they like novelty of trying something different – or it may be that they are searching for the perfect boat they never quite manage to find.

Does this any of this describe you? If not, I imagine it describes quite a few people you know!

It’s just one key finding from a survey commissioned by the Wooden Boatbuilders’ Trade Association, which intheboatshed.net has been sent in return for helping to recruit a significant number of people to fill out the survey questionnaire.

The survey was carried out and written up by Alison Kidd and Peter Williams of www.prospectory.co.uk.

It turns out that some 11 per cent of traditional-style boat buyers’ purchases are new boats, most of which are built using modern rather than traditional techniques, and the vast majority buy second-hand boats that may be either ready to sail or in need some repair or restoration. These are often found via the Internet.

It also seems that second-hand boat buyers are as likely to buy plans as they are to buy boats.

What concerns me more is that just 10 per cent of the survey group who had bought boats since 2000 were first-time buyers. Taken together with the fact that boat buyers tend to be an older group this rather suggests that boatbuilders, magazines and suppliers in this area are failing to make headway in appealing to new, probably younger customer groups.

I think that’s a frightening thought.

However, it’s nice to be able to report that those who do buy new traditional-style boats are heavily influenced by exhibitions in general but particularly by the Beale Park Thames Boat Show, which is a tremendous annual exhibition of fine boat building. However, it’s striking that the Internet isn’t much used as a means of finding new boats, even though it is a popular route to buying older boats.

The survey’s authors therefore suggest that a better gateway site or even a means of searching for and comparing different options, features and prices online would be helpful. I couldn’t agree more, for while the second-hand boat sales sites are well organised and effective, when you’re looking for a newly built boaqt the picture is very different. As the survey authors put it: ‘unless you know the name of the new boat you’d like to buy or the name of its builder, you are unlikely to stumble across it in the Internet. Many of the WBTA boats are not widely known classes of boat’.

Clearly it would be helpful if the WBTA or someone else were to establish a gateway site that would list traditional style boat vendors’ new boats – but we haven’t got that yet. In the meantime, however, we do have intheboatshed.net. For more than two years, we’re been offering to publish stories about boatbuilding and boat restoration projects, and even for sale notices about particularly interesting traditional old boats, and to do this for free.

All we ask for is photos and some information – some sense of the story, of the people and as appropriate about history behind the boat, and its use now and in times past. We’re also interested in technical issues that impact on these things, even down to discussing lines, boatbuilding methods etc. Follow this link and this link to see how it works – these aren’t lectures but in addition to the pictures, there’s usually a little to learn from each post.

In fact, there is a short roll-call of traditional boatbuilders who have made good use of intheboatshed.net’s offer, and their names will be familiar to regular readers of this weblog. With their help, intheboatshed.net has become popular and has reached a point where it gets around 500 visitors and a thousand hits a day, by conservative measures.

I’d say thank you to those boatbuilders – and I’d encourage other traditional boatbuilders to get involved.

What’s more, it seems to make sense to set up a page here offering a good list of boat types and specialist types of restoration, together with the boatbuilders contact details and weblinks where possible.

What do you say? Contact me at gmatkin@gmail.com.

What John Welsford does with mashed potato

[ad name=”intheboatshed-post”]

pilgrim2

The transom for John Welsford’s new cruising dinghy design, Pilgrim. Read
about this interesting small boat at his Pilgrim Diaries

Well known New Zealand boat designer, builder and cruiser John Welsford has written tell us about a technique he has developed for testing the rot-resisting properties of unknown timber and plywood:

‘Hi Gav,

‘I thought that you might like to put my comment about mashed spuds in connection with rot testing.

‘Just to stir things up a bit you understand!

‘Rot is due to fungus and needs food, moisture and oxygen in order to grow and spread. Cut off one or more of those and you don’t get rot.

‘Also, rot, like most fungi, spreads far more rapidly in warm conditions.

‘My test method involves placing the sample on a dish in the warmth of the kitchen, and covering it with mashed potato. Potatoes are almost all starch, a form of sugar, and mashing it up with milk brings even more sugars. Mashed potatoes also hold moisture and, being light and fluffy (if made properly) they admit oxygen. So a layer of mashed ‘taties accelerates the rate at which rot takes hold and multiply and is a workable if unusual method of testing wood for susceptibilty for fungal decay. You should see what I do with raspberry jam!

‘Yours, John’

Many thanks John. I might try it some time, though I’d be a bit concerned about this as a practical test. Done properly, it would demand not just well made mash, but would also require brewing up quite a number of different samples. It’s a very interesting idea, but could also be a recipe for trouble in the kitchen that could test more than a piece of wood!

I wonder whether it would work if conducted where no-one goes, round the back of the shed in the summer, and under a plastic sheet?

For more intheboatshed.net posts relating to John Welsford’s boat plans, click here.

For more on John’s plans, see his website; also, there’s a nice new weblog about building a small cruising yacht to his Fafnir plans here.