At last – here’s a set of drawings for building a model of the sailing version of the 12ft Ella skiff. Full drawings are to come when I’ve written my usual builders’ blurb…
The pdfs in the download below (fixed now – sorry for any inconvenience) are all the same size and – if this works out as it should – when printed out everything should be in the same scale on paper. Model-makers should then be able to use the printouts as templates to create a 1/12 or so scale model, including spars and sails.
One point that may not be obvious and which I haven’t explained is that included in the drawings are four panels whose purpose may not be obvious. In fact, these attach to the side decks, frames and bottom immediately before and aft of the central thwart. They’re intended to add some low-down bouyancy in a knockdown, and help to keep the amount of retained free water to a minimum on righting.
Have fun… If you do build the model, I would be delighted to advise if you get stuck, and would be most grateful for photos please!
Ella skiff sailing version model
Don’t miss something good – subscribe to the free weekly intheboatshed.net email newsletter now!