Category: Techniques

Crystal River TSCA chapter builds 14ft Chappelle skiff the traditional way

[ad name=”intheboatshed-post”]

Bill Whalen of the Crystal River Boat Builders chapter of the Traditional Small Craft Association in the USA has been in touch to say the group is building the 14ft flattie skiff recorded and published by H I Chappelle that I mentioned here a couple of years ago. At the time I suggested that it might make a worthy and good-looking boatbuilding project for many people, and I still think so as this year’s boat-dreaming season hots up.

Chappelle includes the lines and a description of the boat in his classic American Small Sailing Craft, which is thankfully still available.

From the photos above it’s clear Bill and his pals have built themselves a splendid boat shed, and are using a gratifying amount of white lead and suitably good looking timber in line with their motto ‘Our emphasis is on tradition… ‘ .

See what they’re up to at their website: http://www.tsca.net/CRBB


Lars Herfeldt builds a gentleman’s runabout at the Boatbuilding Academy

[ad name=”intheboatshed-post”]

16ft gentleman’s runabout Lola, built to a design by C G Petterson, and photographed at the Boatbuilding Academy’s student launch day in December

Lars Herfeldt built this very pretty motorboat during his Boatbuilding Academy course at Lyme using plans by the Swedish designer CG Pettersson.

Academy principle Yvonne Green reports that Lola, which is named after one of Lars’ grandchildren, is a 16ft cold moulded motorboat made from two layers of 3mm plywood with a final layer of mahogany veneer laid fore and aft to simulate a more traditional carvel planking construction.

While on the course Lars wrote a weblog that includes the boat build but also of his life while living at the Academy on the course – it’s in German but includes many excellent photos including a series showing one of the famous Beer luggers going about. He also played Father Christmas at the Academy Christmas dinner, at which Yvonne says he managed to look as if he’d stepped out of a Norman Rockwell illustration.

For more photos from the student launch, check out Edward Pearson’s Picasa photo set of the event.

Intheboatshed.net readers may be interested to know that Lars is returning to the Academy in September to instruct a residential course on building West Greenland kayaks in September, at which up to eight students will build a traditional kayak over ten days – course members will stay at nearby Trill Farm and build the boats in the farm’s  magnificent old barn.

Many thanks for the story Yvonne – and don’t forget to tell us more about the kayak course, as I think there will be some interest from readers!

Stirling and Son build a traditional 17ft Tamar salmon boat for the Scobles

[ad name=”intheboatshed-post”]

Tamar salmon boat Gloria Marcella. Click on the thumbnails for bigger images

Stirling and Son are currently building some smaller boats after having had to relocate to a garage while they organise themselves some new premises – for some years they were based at Morwelham Quay, which is sadly now in administration.

To prevent misunderstanding, I should explain that the garage is a temporary arrangement and that the outfit will be moving to new premises to begin a new 44ft project by the end of this month. Meanwhile, however, Will and his colleagues have been hard at work, as he reports, and have sent in these very nice shots of a Tamar salmon boat in build:

‘Two recent new builds in the garage have been a 17ft salmon boat for the river Tamar and an 11ft pilot’s punt for a pilot cutter.

‘One of the elder salmon fisherman, Alec Scoble, who has net fished the Tamar in wooden boats since the 1950s has ordered a new boat in preparation for the renewal of the fishing licences, which have been suspended since 2004.

‘In order to increase the viability of the boat, Alec’s son Colin Scoble will net fish with tourists in the traditional manner, tagging and releasing the fish for the National Rivers Authority. Also as a continuation of the family tradition Alec’s grandson, Sam Scoble, helped build the boat.

‘There were no plans for Tamar salmon boats; it seems most likely that none have ever existed, so in order to record the shape for the future, I created a draught of the shape based on dimensions given by Alec. Before planking small alterations were made to the forward moulds following an inspection by Alec and his friend Frankie, who had both fished the river since War War II. The draught was altered accordingly and is now held by the National Maritime Museum at Greenwich.

‘The boat is named in memory of Alec’s wife Gloria Marcella, and  has an oak backbone and framing with spruce planking; all fastenings are copper and bronze.’

‘Best wishes, Will’

Will does seem to have the knack of finding some great projects!

Stirling and Son are offering plans for a traditional general purpose 9ft clinker-built dinghy and an 11ft pilot punt of 1900. For more on these, see this earlier post.