Category: Sailing cruisers

Sailing yachts used for cruising, or as cruiser-racers.

Tiernan Roe starts work on a Karl Stambaugh Catbird 16 small cruising sharpie

[ad name=”intheboatshed-post”]

Tiernan Roe, South-West Ireland, boatbuilder, John Atkin, Ninigret, Wooden Boat magazine, Karl Stambaugh, Catbird 16, Galway Bay, WP Stephens, canoe yawl, roeboats, weblog

It may not look like much at the moment, but this is the very beginning of a new project for Tiernan Roe. Tiernan is a South-West Ireland-based boatbuilder who has recently received a huge amount of positive coverage for a beautiful John Atkin-designed Ninigret 22 he built for a client.

The acclaim has come from quite a variety of sources, including the hard to please Wooden Boat magazine.

Here’s what Tiernan has to say:

‘Just thought you might like to know what I’m up to at the moment. I’ve started building a Karl Stambaugh-designed Catbird 16 cruising sharpie for a client to use on Galway Bay.

It’s to be a ‘sailaway’, as they say – so the client will be doing the rigging and painting. Oh joy!

I’ve attached a few photos of setting up the frames, and I’m hoping to do a bit of a stop motion video when I’m finished and when I get the time.

I hope all is well with you. As always I’m enjoying intheboatshed – only last night reading I was reading about canoe yawls in WP Stephens’ book, and now all I have to do is find a client who wants one.

Anyway if you have any queries etc. don’t hesitate to contact me.

Regards,

Teirnan’

Click here for Tiernan’s weblog. For  information about Karl Stambaugh’s Catbird 16, click here.

Gadfly II is back on the water – but has anyone got any unwanted iron for ballast?

[ad name=”intheboatshed-post”]

blackwater sloop, gadfly II, gaff cutter, iron ballast, simon papendick, whitstable

blackwater sloop, gadfly II, gaff cutter, iron ballast, simon papendick, whitstable

Whitstable-built Blackwater sloop lookalike Gadfly II is afloat once again after a period of restoration, reports boat builder and repairer Simon Papendick. Here’s what he says about the East Coast gaff cutter’s progress:

‘It has been a hard over the last few months, but I have finally got Gadfly II back in the water. After a few days of all hands to the pumps, she is now all but watertight.

I took her for a sail the other day and it was good to get her underway with new sails. The boat felt good and so did I after all the hard work I’ve put  in over the past three years.

The only problem I have now is working out how much internal ballast she is going to need to get her to sit on her lines and not be so lively. So far I have put in 300kg of ballast, which has made things better – but she is still way above her lines, so possibly I will have to find about another 300kgs. I think that should just about do for the moment.

So if any of the readers know or have any old iron they want rid of that I can pick up and use please I would be most  grateful!’

Well done that man!

Simon runs a boatbuilding and restoration firm (J-Star Boat Services) and a sailing school (J-Star Sea School), so if you have any suitable ballast please contact him directly via his business websites.

Perhaps of particular interest to intheboatshed.net readers are some small boat maintenance workshops Simon is running designed to help boat owners to increase their knowledge and do small jobs themselves. These start form removing seacocks to replacing boat windows and anything in between. They are run on a
weekly basis on a four:one basis. Contact Simon on 07799401650 or email simonpapendick@btconnect.com.

A new site for canoe yawl enthusiasts

canoe yawl, dick wynne, george holmes, eel, canoeyawl, humber yawl

George Holmes’ influential canoe yawl Eel

The canoe yawl deserves more prominence, and so Dick Wynne and friends have set up a website devoted to this type of boat at www.canoeyawl.org. I hope it’s a great success!

Here’s what Dick and co say about their venture:

We want to draw attention to today’s and tomorrow’s canoe yawl designs and not be seen as a purely historical group. But fear not, we love the pioneers too — one of the CYA ringleaders sails a 19th century design. Our aim is to represent all known canoe yawl designs, past and present, on these pages — it’ll take us a while to flesh out the design archive, with more designs, and more words to those already present.

  • If you have designed a canoe yawl, we want to hear from you and to give you some free advertising.
  • If you own a canoe yawl we want to hear from you with your experiences of it.
  • If you’re selling or buying a canoe yawl, we want to help you.
  • If you are none of the above and just like canoe yawls, we want to hear from you anyway!

The folks behind canoeyawl.org have a magazine in the pipeline that we hope will appear twice a year, and some interesting practical initiatives to discuss. I hope it’s all a great success.

PS – if you’re interested in canoe yawls, you may want to check out one of the seriously good reads of the year: Holmes of the Humber.