Tag: epoxy

The Dinghy Cruising Association at the Beale Park Thames Boat Show

[ad name=”intheboatshed-post”]

dca, dinghy cruising, association, beale park, thames, boat show, suppliers, wooden boat, boat plans, boatbuilding, sailing

The Dinghy Cruising Association at last year’s Beale Park Thames Boat Show

Dinghy Cruising Association member Nick Watt has written to say that his organisation will be at the Beale Park Thames Boat Show.

The DCA is usually in residence at the show, and generally provides a lot of the on-water activity in a range of small craft.

This year, says Nick, the DCA folks will have a stand ashore on which it’s hoping to present member Dave Jennings’ nearly completed Roamer – this is a specialist dinghy cruising design designed by a DCA member, the plans for which are available from the association. To find out more about the Roamer, click here and here. There will also be a pontoon providing moorings for DCA members’ boats.

A key aim of the DCA’s presence at the show is to demonstrate that there are more ways of having fun on the water in small boats than necessarily racing around the marks (hoorah to that, I say), and that a wide variety of small craft (including, hopefully, Alistair Law’s Paradox) can be used for cruising in coastal waters.

Whatever, those who drop in can be sure of a welcome.

Norman Fuller launches his Ella plywood skiff built to free plans – and it’s a success!


free boat plans, boat plans, plywood boat, plans, skiff plans, ella skiff, gavin atkin, stitch and glue, tack and tape, wroxham broad, norman fuller

free boat plans, boat plans, plywood boat, plans, skiff plans, ella skiff, gavin atkin, stitch and glue, tack and tape, wroxham broad, norman fuller free boat plans, boat plans, plywood boat, plans, skiff plans, ella skiff, gavin atkin, stitch and glue, tack and tape, wroxham broad, norman fuller

Norman Fuller has launched his Ella skiff built using free boat plans from this website – and has pronounced it a success.

He launched the boat on Wroxham Broad, not far from his home in Norwich. Here’s what he had to say about the project when he emailed me late last evening:

‘Hi Gavin, after a slow start I finally got under way, having not been on the water for many many years.

‘Once I sorted the collars on the oars, worked out where they needed to fit and then nailed them in place, the Ella skiff performed very well. As you see I left the forward hatch open because thats where I kept the nails and hammer.

‘The boat’s very easy to handle and I think the skeg was doing it’s job, as I found I could row in a straight line, which could be some sort of indication the bottom is not skidding.

‘Only one was a little bit awkward, and that is the angle of the rowlock’s. I set them in the gapped inwale following the line of the side of the boat, but they need to be more upright, so I think I will change them. My friend Jenny was so proud of what I had done she took me for a carvery, not bad eh?

‘Till next time!

‘Norman’

From the pictures, I think the problem you had with the rowlocks is that they could be higher – the choice is between lowering the thwart and raising the rowlocks, or both.

I’d start by screwing a 4-6in by 1 1/2in by 1 1/2in block with chamfered ends onto the gunwale for the rowlock to fit into. It’s easy to do, you see it done very often, and when the block wears you can replace it. Small people and kids won’t need them, but I should add these blocks to the plans. Here’s an example of how it would work; and here’s another from intheboatshed.net reader David Luckhardt.

The Ella skiff is a lightweight general purpose stitch and glue flattie skiff for use in sheltered waters. She’s 12ft long overall by 4ft beam, by 400lbs displacement, and is designed for stitch and glue construction using 1/4in or 3/8in 4ft by 8ft plywood. It is meant to be a simple and quick stitch and glue building job of a size that is convenient for building in domestic garages made to take a small to medium-sized car – which probably describes the building area available to most people. For more on this boat and the plans, click here.

Scottish Coastal Rowing Project grows to 19 St Ayles skiff boatbuilding projects

st ayles, skiff, iain oughtred, rowing, scottish coastal rowing, alec jordan, jordan boats, plywood boats, boat kit

Rowers trying out the original St Ayles skiff at Eyemouth last weekend

Alec Jordan of the Scottish Coastal Rowing Project tells me that he received the 19th order for a St Ayles skiff kit this week.

Nineteen St Ayles skiff building projects in less than a year reflects a fantastic explosion of interest in the SCRP project since it began. See my post about legendary small boat designer Iain Oughtred drawing the plans for the St Ayles skiff for the Scottish Coastal Rowers here: Iain Oughtred draws the boat that will bring coastal rowing races back to Scotland. It appeared only in July last year!

Alec, whose business Jordan Boats makes up the kits, says that planning is well underway for the first regatta at Anstruther on 29 May, and that seven or eight completed boats are expected to be ready and on the water for the event.

He’s careful to observe that some of the teams won’t have had much time to practise rowing by that time and  however, and suggests the standard of the rowing should be a little bit higher by the time of the Portsoy Festival four weeks later, when there may be even more of the new boats competing.

Other news this week is that the first official women’s crew from Anstruther will have had its first practice.

A particularly striking development is that I gather there have even been expressions of interest in the SCRP from south of the border with England…

st ayles, skiff, iain oughtred, rowing, scottish coastal rowing, alec jordan, jordan boats, plywood boats, boat kit st ayles, skiff, iain oughtred, rowing, scottish coastal rowing, alec jordan, jordan boats, plywood boats, boat kit

Start receiving the weekly intheboatshed.net newsletter: sign up here