Tag: epoxy ply

Glued clinker John Gardner Whitehall skiff launched by BBA students

Derek Thompson LRPS - Mark Cotterill Whitehall skiff on parade

Derek Thompson LRPS - Mark Cotterill Whitehall skiff on the water Tracey Marler - Mark Cotterill Whitehall skiff Tracey Marler - Mark Cotterill Whitehall skiff waiting for launch

Chelsea Davine - Whitehall skiff with Matt Cotterill and Yvette Smith newly engaged

Photos by Derek Thompson LRPS (first two); Tracy Marler (third and fourth); and Chelsea Davine (fifth)

Boat Building Academy students Matt Cotterill and Nuh dan Per built this glued clinker epoxy ply 14ft Whitehall skiff ready for the student launch in December, reports BBA staffer Emma Brice.

Originally from the Yorkshire Pennines, Matt worked in package design and 3D branding before throwing it all in and taking up the chisel in March 2010.

Matt chose the John Gardner-designed skiff because of its general similarity to the traditional boats of the Thames – he lives in the Thames Valley.

The boat, named Nicky Nacky Noo, was made using Gaboon marine plywood, with West African mahogany plywood for the sheer strake. Matt, who I gather showed clear evidence of his designer’s eye, and great attention to detail and craftsmanship, incorporated steamed timbers and various bronze fittings.

When it came to launch day Matt certainly added a dimension of his own to the schedule: surprised onlookers cheered as he rowed out on his maiden voyage, got down on one knee and proposed to his girlfriend Yvette. She said yes, and accepted the wooden ring Matt had made himself.

A local newspaper article about the newly engaged couple appeared under the headline ‘Bride and Boom’.

I should add that Chris Partridge of Rowing for Pleasure beat me with this story weeks ago, but it’s still a very cute tale.

With the course is over, Matt is setting up his own workshop to develop wooden products, inspired by the shapes and forms of boat building and using boat building construction methods.

Nuh, Matt’s main helper on the build, is of Turkish descent but was born and grew up in Germany and is one of a number of German students who have studied at the BBA. Nuh was an IT project manager for a car manufacturer before attending the course at Lyme. He is now pursuing boat building opportunities in warmer climates and hopes to move to Greece.

PS – Photographer Derek Thompson has signed up for the next BBA 38-week course due to start in March and attended the December launch day to see what he was in for. I guess he found out…

BBA students launch racy Wolstenholme Mallard dinghy

[ad name=”intheboatshed-post”]

andrew wolstenholme , boat building academy , dinghy , dominic frankis , epo,y ply , glued clinker , Lyme , mallard , mallard dinghy , steve bramley , students

andrew wolstenholme , boat building academy , dinghy , dominic frankis , epo,y ply , glued clinker , Lyme , mallard , mallard dinghy , steve bramley , students andrew wolstenholme , boat building academy , dinghy , dominic frankis , epo,y ply , glued clinker , Lyme , mallard , mallard dinghy , steve bramley , students

Another boat launched at Lyme Regis Harbour by Boat Building Academy students this summer was an Andrew Wolstenholme-designed 12ft 5in glued clinker Mallard dinghy.

Named Born Slippy, she was built by Dominic Frankis and Steve Bramley, along with other students.

Dominic took a sabbatical from work in London as a management consultant in the health sector. He’s never sailed before but now has no excuse. Now back behind his desk, he also says it’s only a matter of time before he’ll be boatbuilding again.

Steve worked as a tree surgeon and builder before joining the course, and is now using the skills he gained on the course to renovate a house.

The Mallard should prove to be a lot of fun; the rigging is more modern than is usually employed on these Mallard dinghies, which the Boat Building Academy folks say makes it quite a racy little sail boat.