Anthony Mace runs a small Bristol-based business called Shipshape Boatbuilding & Woodwork from a workshop at Underfall Yard, Bristol, and also does mobile repairs and restoration work, and takes on bespoke commissions.
He set up in business around a year or so ago, after graduating from the Boatbuilding Academy at Lyme Regis in 2015, and prior to that worked as a designer and occasionally taught product design at the University of the West of England.
Anthony chose to retrain at the BBA after over a decade of sitting in front of the computer – he’d got into design because of a love of making things and decided it was time to get back in the workshop and work with his hands again.
I’ve had some interesting projects since I graduated including fixing a Maltese dysa, but I wanted to let you know about a recent project I’ve just finished:
‘The job was a restoration of a Merlin Rocket (no. 2480). I believe this boat was started sometime in the 70s (so the owner told me) and had never been completed. The owner had bought the boat as just a hull with some framing and the centreboard case, as well as a really interesting curved thwart.
‘I stripped the old varnish off, repaired the cracked transom (which had split) and buoyancy tank, before fitting new curved side and fore and aft deck framing in marine ply.
‘I also steamed and fitted a sapele cockpit combing, spinnaker chute and gunnels, as well as finished it in a mix of paint (outside), oil (to make maintenance of the hull interior more practical) and varnish (decks and combing).
‘The boat has now gone back to the south coast where the owner plans to rig it himself before getting it on the water this summer.
‘I’m always looking for similar projects and commissions.
‘All the best, Anthony Mace’
I’ve attached a couple of images of the boat before and after the work, but there are lots more of the work in progress on my Facebook page and Instagram.
Restoration of an early Merlin Rocket (no. 2480). This boat was started sometime in the 70's and when it came to me was…