[ad name=”intheboatshed-post”]
Alan Stancombe’s Cinderella
Congratulations to Alan Stancombe on completing his good looking open canoe Marie Rose, built to my Cinderella design. I particularly like the small bouyancy boxes, and the carrying handle/beam strap/whatever it’s called.
Here’s what he has to say about it:
‘Hi Gavin:
‘I thought you might like to see the end product. You can see that I fitted the buoyancy tanks, which look quite nice. My only real problem was with the fillets. I taped them while the epoxy was too soft and consequently they are very lumpy. Also where I dot and dabbed between ties they were too big. Because there was no rebate and the joints were just butt joints I did not want to sand them down too much. Next time I will let them set before adding tape. The problem with this is that you get air bubbles in the joins.
‘Anyway it doesn’t look too bad for a first go built not from a kit. My varnishing skills are improving; I compromised on the paint/varnish and used International Interdeck inside as a non-slip medium.
‘Thanks for your help and great design.
‘Alan’
Plans for building Cinderella are included in my book Ultrasimple Boatbuilding, and are also available from the free boat plans page.
PS Have you used the little logos below yet? They allow you to share this post via Twitter or Facebook, save the link in Google or your own web browser, and finally you can email the link to a friend. Handy, I’d say…