Stirling and Son develops a new 9ft dinghy

[ad name=”intheboatshed-post”]

dscf5402

dscf5408 dscf5396

The new 9ft dinghy from Stirling and Son – the lower
photos show the materials and moulds

The Stirling and Son boatyard down at Morwelham near Tavistock must be one of the most picturesque anywhere – I enjoy the photos Will Stirling sends us for their setting almost as much as the boats.

Here’s what Will has to say about the dinghy in the photo.

‘Dear Gavin,

‘The dinghy is to go to Northumberland – but I can build another with a lead time of approximately six weeks.

‘She is 9ft long of mahogany planking with an oak sheer strake. All other timber in the boat is oak with copper fastenings.

‘The shape is a very stable one, as I’ve had had some near-capsizes getting into dinghies in the past. She has a mid-19th century shape with the bold forefoot and relatively full bow, while she is finer aft with a shapely transom.

‘After building this dinghy I have set down the shape in a full five-page A2 draught with A4 offsets, scantlings and materials list. I am to build the next dinghy from this draught and then make full size mould templates with the planking lined out and a little colour booklet with photos taken along the way. I will let you know when that is all prepared, probably in a couple of months.

‘Best wishes

‘Will Stirling’

I think that booklet might interest quite a few budding home boatbuilders, and when it’s ready I’d like to put up a post about it here Will!

See the Stirling and Son Wooden Shipbuilding and Repairs website at http://www.stirlingandson.co.uk or contact the company at 01822 614 259.

PS – If like me you’ve been admiring Will’s trestles, see some handy trestle plans here. Ok, they aren’t Will’s plans but they look quite similar.


Advertisements

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.