Tag: simon

There’s more on the Gadfly II story – but can anyone fill in the ‘missing years’?

[ad name=”intheboatshed-post”]

DSCF0107

DSCF0046 DSCF0049

The Kent-built Gadfly II

Simon Papendick has written to give us an update to the earlier posts about the small cruising boat he’s currently restoring, Gadfly II, and to ask for help in finding more information. (For more on Gadfly II, click here.)

Here’s what he has to say:

Hi Gavin:

Thanks to Classic Boat, I now have some new information about my yacht Gadfly II.

It would appear that the boat was build in the 1930s in Whitstable, Kent for a local builder, and that she was the second of three boats he commissioned. I have information about her first years in Kent from the 1930s through to 1949, and then I have more details about her whereabouts in the early 1960s – but then the trail goes cold from 1964 until the early 2000’s when the last owner purchased bought her.

If anyone has any information about Gadfly II’s whereabouts in the missing years, could they please let me know?

During the World War II I gather she had a small mishap when she was almost destroyed by German bombs that where dropped near where she was being stored.

The original owner of the boat only passed away a few years ago, as did the foreman of the yard that build her.

If any of your readers can come up with more information about the boat it would be most helpful.

Regards

Simon

Have you got a story to share or is there some information that you seek?

It could be about an interesting boat you own or are repairing, or a boat-building or repairing skill, or an adventure in a traditional or traditional-style boat? Why not do it through intheboatshed.net? Contact me at gmatkin@gmail.com.

Gadfly II restoration makes progress

[ad name=”intheboatshed-post”]

DSCF0055

Simon Papendick and family make progress on their project to restore Gadfly II

DSCF0007 DSCF0009 DSCF0023

DSCF0026 DSCF0046 DSCF0049

DSCF0079

I’m grateful to Simon Papendick for getting in contact to report on his progress in bringing Gadfly II back to life.

Gadfly II looks very much like a Blackwater sloop but is reported to have been built in Kent rather than Essex, and there are some intriguing clues to her history, including a 1908 coin under her mast. For more on this read some previous posts on this topic.

Here’s what Simon has to say:

‘Hi Gavin,

‘Since I contacted you last I have got on well with the restoration on Gadfly II. We’re getting close to finishing the outside with the deck all but finished. The hull is all caulked up with putty in the seams, the hull has been glossed and the first coat of antifouling is on the bottom.

‘One of the last jobs to do before the boat goes back in the water will be the replacing the keel bolts, which is going to be done in a couple of weeks time at a local boatyard close to our home. Once the keelbolts are done and the boat is watertight then I will fit out the inside with an interior very close to what it would have had when it was first built.

‘After the boat is re-launched I will have the mast stepped and take it for its first sail in many years. From what I was told by its last owner its last sail could well have been 20 years ago or more.

‘It will be a wonderful experience for both the boat and myself to get the boat back to where she should be gracing the East Coast again after all these years. As you can see from the photos it is a family affair.

‘Regards

‘Simon Papendick’

Many thanks Simon. I’m pleased to hear that you’re planning to be true to the original when you start work on the interior, and I think it’s particularly good that you have your family’s help and support – so many people seem to work in isolation.

Make sure you don’t miss anything good. Support intheboatshed.net by subscribing to our free weekly email news letter now!


More information about the Kent-built ‘Blackwater sloop’ Gadfly II

We’ve had a short message and a few more photos of Gadfly II from boatbuilder and restorer Simon Papendick.

‘Since I contacted you last on the website, I have found out more about the boat’s history and type of boat she is – or at least the design she was built to.

[ad name=”intheboatshed-post”]

gadfly-1

gadfly-3 gadfly-2

Gadfly II – she’s fairly clean, but there’s still plenty of work to do!

We’ve had a short message and a few more photos of Gadfly II from boatbuilder and restorer Simon Papendick.

‘Since I contacted you last on the website, I have found out more about the boat’s history and type of boat she is – or at least the design she was built to.

‘It appears that Gadfly II was built in Kent, as was I was lead to believe was the case. However, she was built to look like a Blackwater gaff sloop called Iolanthe and has the same hull design and dimensions.

‘The only different between the two boats is that my boat has an extra 3in depth in the iron keel. I have attached a few photos of the work in progress to restore this fine old lady to her former glory.’

Iolanthe appeared in Classic Boat magazine September 2004. I should get my copy out and have a look!

For an earlier intheboatshed.net post about this boat, click here.

Simon Papendick, who runs J-Star Tuition & Boat Services, can be reached at 07799401650 and info@jstartuition-boatservices.co.uk.