Small boats of North Vietnam

Just back from a business trip to Hanoi, my brother Matt Atkin has sent me these photos from the country. He reports that North Vietnam is an astonishing place where goods are still moved using carts and oxen, and from these photos it’s a place where traditional small boats are very much in evidence.

I can’t condone the use of cute children to sell goods – though I guess it’s better than some of the alternatives, even for the kids involved – but what astonishing scenery and boats!

The little craft seem to be woven from slender wooden or bamboo laths and then sealed, I’d guess with pitch. Can anyone confirm this? Also, they’re rowed forward without the aid of any complicated rowing machinery.

This is only a small sample of the photos Matt sent over, so I’ll put some more up in the next few days. Thanks Bruv!

There’s an interesting thread on Vietnamese boats at the Woodenboat Forum and an English language website devoted to the boats of Vietnam here.

Don’t miss something good! If you’d like to receive a weekly intheboatshed.net newsletter sign up here.

A mystery dinghy with a rather nice old-fashioned shape. But what is she, and how old?

Mal Nicholson has sent me these two photos of a boat he has bought, and which he intends to fettle up for use as a tender with the Humber sloop known as Spider T. Read all about her here.

She’ll fit neatly on Spider T’s carling hatches – but what is she? Mal says he has a mast and sails, but there’s no centreboard and there seem to be no identifying marks.

I’d say she was about 16ft in length, or may be a foot or two longer, and that she has a rather nice shape.

By they way, on the 13th and 14th March Mal and friends will be holding an open day from 10am to 4pm at Spider T’s home moorings at Keadby Lock near the A18; she will be open from 10 am to 4 pm on the Saturday and 11 am to 4 pm on the Sunday. If you get along, do mention intheboatshed.net – I gather you might just get a guided tour!

Check Rule 15 – was it sponsored by the department of marine regulation at the University of the Bloody Obvious, or do the organisers have an off-the-wall sense of humour?

Sticker on a beautiful Riva, hand-cut pedal crank made from plywood

The good folks of Melbourne, Australia, have just held their first Wooden Boat Festival, and local Wooden Boat Association member Richard Monfries has put a nice report on his weblog Wooden it be Nice, and this excellent Flickr set of photos.

Another local and regular intheboatshed.net correspondent Dale Appleton also took some photos of the show. From his relatively smaller collection, I particularly liked best is the one at the top of this post about piratical behaviour at the top of this post, closely followed by the sticker on a beautiful Riva speedboat that quietly announces that it has been serviced by a company in Monaco in Europe, which even in our times must seem very exotic and distant to many of the folks of South Australia, and the beautifully made hand-cut plywood crank mechanism. After all that painstaking effort, I wonder how well it works?

If you’d like to receive a weekly intheboatshed.net newsletter sign up here.

Round Britain slow sailer and film-maker Dylan Winter has put up an 18-minute piece of film about sailing around the Walton Backwaters, and about the explosives dock at Oakley Quay.

The video is part of his ongoing Keep Turning Left video project and is his first paid-for film download – for the princely sum of $0.99. There’s a taster on his homepage.

Dylan calls the new video 18 minutes of pleasure and the next best thing to sailing. It seems a trifle hyperbolic as claims go – but as we emerge from yet another nasty winter of bad weather and grimmer news and disasters, I’d say that he definitely has a point.

Just looking at the taster, clock the lovely yawl pictured in evening light early on – do I recognise a well known and recently built Alfred Strange yawl? I think perhaps I do…

The Backwaters are a small area of estuary packed with islands and channels, and make an interesting sheltered sailing areafor visiting boaters with a series of quays and settlements around its perimeter. I haven’t been there myself, but it’s definitely on my agenda, and it happens that I’ve been reading about the area while travelling to work in London this week, along with the sad, tired army of London’s commuters.

My companion on the train has been FB Cooke’s unconventional pilot Coastwise Cruising, which turns out to be as refreshing as Dylan’s film. For more on Cooke, click here.

He starts for the Backwaters from the Stour, and as he setsoff I can just smell the sea and the hot summer day to come.

‘After studying the chart we come to the conclusion that we must start at about 8am to make sure of carrying the ebb out of the Stour and down Harwich Harbour to the Cliff Foot buoy… It is a jolly morning, with just a suggestion of haze which means heat later on. We are sorry to say goodbye to Wrabness, but at the same time we are anxious to visit Walton Creek and Hamford Waters which on the chart look intriguing.

‘Getting our anchor, we start away down the Stour close-hauled on the starboard tack.’

Ahhhhh! I think Dylan and old FB Cooke have a lot in common…

If you’d like to receive a weekly intheboatshed.net newsletter sign up here.

The new Tideway in build at Good Wood Boat – click on the thumbnails for a larger photo

Traditionally built 12ft Tideway dinghies are available to order after a gap of ten years – and the new version of the boat will be on show at the RYA Volvo Dinghy Show.

The new Tideways are being built by Good Wooden Boat Company after the company’s Stephen Beresford met the Tideway Owners Association (TOA) at last year’s show and was impressed by the boat itself, and by the association’s activities and enthusiasm. Good Wood Boat specialises in building boats using Forestry Stewardship Council (FSC) certified approved sources. (The company also builds Uffa Fox’s Redwing sailing dinghy, of which more later.)

The TOA says that the new boat has already been bought by an existing Tideway owner and its members are very excited by the prospect of the new boat joining the fleet.

If you’d like to receive a weekly intheboatshed.net newsletter sign up here.

The latest Water Craft will be with us any day

It’s almost time for the next edition of Water Craft magazine to land on our doormats – so what’s in store this time around? Lots of boating goodies as usual – including the first of two big features by our friend Ben Crawshaw in which he reports on his adventures sailing his Light Trow named Onawind Blue. That feels like a real privilege, I must say, even though I’d prefer to seem my design used for rather less extreme adventures…

Here’s what Water Craft editor Pete Greenfield has to say about the upcoming issue:

So – how has boat craftsmanship, amateur and professional, fared through the long hard winter and the much longer and harder recession? In W80, we seem to have some of the answers.

Interestingly, for many professional wooden boat builders, the answer seems to be they are managing rather nicely thank you… though mostly with repairs rather than new builds.

At Peter Freebody & Co, for example, spiritual home of so many traditional Thames craft, Melanie Freebody tells Kathy Mansfield there may be snow on the roof but the boatshops beneath have rarely been busier.

Giving up the well-paid but stressful job in IT to learn to build wooden boats is a good idea for some. Certainly, on a dark dank morning in December when the students of 2009 launched the fascinating variety of craft they’d built at the Boat Building Academy at Lyme Regis, our Dick Phillips detected little stress… though maybe the champagne helped.

No nerves on the part of our tame amateur boatbuilder Peter Goad either, when Messrs Phillips and Chesworth turned up to sail the Cape Henry 21. Perhaps, as Peter explains in his final fit-out article, a five-year project encourages a relaxed and patient frame of mind.

Watch, on YouTube.com, Ben Crawshaw’s reports on sailing a small boat in the Med and you’ll see rather more evident anxiety. And reading about how he built his first boat, a slender lugger called a Light Trow intended for more sedate waters, in a public garden in Spain, you’ll encounter few manyana moments.

More sail than oar but definitely a craft to cope with exhilarating sea sailing, we think Paul Gartside’s free plans, complete with lines and offsets, for his 20ft (6m) lugger will persuade many a putative backyard boatbuilder to stop saying manyana and take the plunge.

As may the editor’s outdoor boat….

But outdoors, as Colin Henwood of Henwood & Dean Boatbuilders explains in his masterclass on painting and varnishing is not the ideal place to give your boat the finest finish for the new season. You need a big tent, kind-of like Water Craft itself.

Buy a subscription now (see the link in our right-hand column here at intheboatshed.net and pay with your credit card via PayPal) or find the March-April Water Craft in your local newsagents – to find a stockist in the UK see http://availability.mmcltd.co.uk

If you’d like to receive a weekly intheboatshed.net newsletter sign up here.

Scruffie Marine boat kit importer Whisper Boats’ reports that the 18th Scruffie kit boat in the UK is due to arrive at Tilbury in a couple of weeks.

Whisper boss Max Campbell says the new boat will be a Scintilla 24ft trailer sailer, but the most popular Scruffie model in the UK has been the Secret, of which there are 11 in the UK, nine of which are still in build. Scruffie Marine is based in Australia, and its boats are designed by Derek Ellard.

The Secret has a round bilge hull built from plywood – see the photos below showing how this is done. Here’s what Max has to say about it:

‘Essentially, we build a double chine hull, with a narrow, parallel-sided, intermediate chine panel, which is then packed out over-sized with cedar – triangle section down the edges, and square or rectangle section (about 3in thick) in the middle. This is then faired back to a profile – a piece of ply with the curve cut in it. You have then, in effect, laminated up a huge stringer, running most of the length of the boat at waterline level.

‘We hit a submerged object on the River Avon when motoring at a good 5 knots, that skewed the boat sideways a couple of feet, but the only damage was to the surface paintwork! The whole hull is sheathed with glass cloth and epoxy.’

Rounding-out the hull of a Secret: attaching chine panels, bottom panels in place, chine thicknessing with cedar, fairing along side and at transom, sheathing with glass cloth

See Whisper Boats’ Youtube homepage for clips of the Secret sailing.

If you’d like to receive a weekly intheboatshed.net newsletter sign up here.

It’s peaceful as I write at 7.30 in the evening – but you should see it during the day!

Giacomo de Stefano is building one of Iain Oughtred’s Ness Yawls online this week – but you may have to be quick to catch it judging by the speed he and his friends were working working at when I looked earlier today. Click on the image to see what’s going on.

I should explain that Mr de Stefano plans to row and sail this boat from London (he’s leaving on the 15th April by the way) to Istanbul in a kind of new-age bid to forge a new relationship between man and nature. It’s a big ask, but then so is his target of sailing and rowing his way to Istanbul in the space of six months with little or no financial backing.

Anyway, he plans to have his boat built in four weeks, and from what I’ve seen he’s likely to make that target. Click on the photo above to catch a little of the action. See his Man on the River project website here: http://www.manontheriver.com

For many more intheboatshed.net posts about boats built from Iain Oughtred’s plans, click here.

If you’d like to receive a weekly intheboatshed.net newsletter sign up here.

Wooden Boat Association members of the Melbourne and East Gippsland areas out on the water – click on the image for a video of local members’ boats

The people of Melbourne are going to have fun this coming weekend – for their Victoria Harbour is to be home to the first Melbourne Wooden Boat Festival.

The event involves all of the major wooden boat and classic yacht groups in the area, and is intended to be a great event for boating enthusiasts but also connect the broader public with the spirit of wooden boats, boating and traditional boatbuilding.

It sounds like a big old do, with on-water and landside displays, model sailing and racing boats, trade displays, shanty singers, in-harbour sailing, working boats displays, boat maintenance classes, a shipwright’s conference. Naturally there will be sailing, rowing, steamships, tall ships, knot tying, boatbuilding, book stores, classic powerboats and, thankfully, the coastguard will be on hand to tell people how to do it all safely. It’s all being organised by the local Wooden Boat Association, and I think they’re showing a great deal of enterprise.

If you’d like to receive a weekly intheboatshed.net newsletter sign up here.

It is entertaining, it doesn’t last too long and it is in a good cause! And if you can’t be bothered with the video, go straight to http://www.keepturningleft.co.uk.

Charles Stock making his customary good use of his wellies. Image copyright Tony Smith (aka Creeksailor) and used with permission

I’ve stumbled across a series of short Youtube videos featuring Charles Stock, a legend among small boat sailors, particularly on the Thames Estuary and East Coast of England.

An enthusiastic sailor since he was a kid, in 1963 Stock created a new cutter-rigged boat for himself using a 16ft Uffa Fox-designed hull made by Fairey and the rigging from an old half-decker he bought in 1948. The result was Shoal Waters, a small wooden boat in which he has sailed regularly ever since without an engine and without a tender – instead, he follows the tides, moors in shallow water and, if he wishes to do so, goes ashore in a pair of rubber wellie boots.

He’s kept meticulous logs and accounts ever since, travelled over 70,000 nautical miles in his boat, written countless articles, taught sailing and navigation to evening classes for decades and wrote an excellent book, Sailing Just for Fun: High Adventure on a Small Budget, which has sold well over 4000 copies.

He also has his own website: http://shoal-waters.moonfruit.com.

Here are the Youtube videos:

Charles Stock 1

Charles Stock 2

Charles Stock 3

Charles Stock 4

Charles Stock 5

Charles Stock 6

Charles Stock 7

Charles Stock 8

Charles Stock 9

Charles Stock 10

Charles Stock 11

Charles Stock 12

Charles Stock talks about choosing the hull for Shoal Waters

Youtube tends to encourage anonymity, so at this stage I don’t really know who recorded and put the clips – but his Youtube home page and extensive collection of videos are here: http://www.youtube.com/user/creeksailor

Creeksailor also has a weblog here: http://creeksailor.blogspot.com

More photos of Shoal Waters in action appear here: http://www.saileastcoast.co.uk/shoalwaters.htm

I’ve also pasted a photo below from Paul Mullings, who has this to say:

‘Hi Gav

Ben Crawshaw sailing Onawind Blue in ‘entertaining’ conditions

Not for the first time, in the middle of a grey British winter, Ben Crawshaw has posted a Youtube clip of himself enjoying sailing his boat Onawind Blue on a sunlit blue sea. He’s obviously having a riot and I’m filled with envy.

There’s a serious message here for all of us: even in the UK this could be you, this summer. Get or build a boat and let’s all go sailing!

For more posts about our friend Ben and his Light Trow, click here.

Photos from Raid Finland some years ago (photos from Richard Wynne); there’s a report on the latest Raid Finland at Duckworks

Henley Whalers group members George Trevelyan and Geoff Probert have organised a rowing and sailing ‘raid‘ event on the English South Coast for modern and wooden boats. It’s scheduled for the few days between 28th July and the 1st August 2010, starting from the Western end of the Solent.

A raid is an organised rowing and sailing passage in company in open boats, sometimes made of wood and traditional, sometimes more modern, powered by sail and oar, and supported by an organiser’s launch or rescue boat. In addition, arrangements are made to carry participants luggage from one overnight stopover to another!

Raids are generally non-competitive events, but often include fun prizes to recognise special qualities and achievements, and there are sometimes short sailing or rowing races.

I should explain that the word ‘raid’ here comes from the French organisers of the pioneer events and isn’t meant to imply anyone plans to attack homes and villages en route.

The idea of the raids first became popular in Portugal and Scotland in the 1990s and successful events have been held on the Douro River in Portugal, the Great Glen of Scotland, and in Sweden, Finland, Italy and Holland. To enter boats need to be equipped for sail and oar, and must be able to support their crew out of water after a capsize, and to be righted unaided to carry on sailing. They will be expected to cover around 15 miles daily.

One of the organisers’ objectives is to attract users who own traditional open sailing boats on the Solent, particularly scows and prams, along with the whalers, gigs, yawls and so on more frequently seen at raid-style events. The maximum number of entries for the new event is 20 boats, so I would expect the places to sell out quickly. It you’d like to be involved, contact English Raid via its website: http://www.raidengland.org

Brites, built in 1936 crossing the Atlantic in the 1960s – her wooden dories clearly visible on deck

(Above, left )Adelia Maria, (above, right) Coimbra, both of which were built in 1948

Novos Mares

Following his tip-off about the stunning Lonely Men of the Dories Youtube videos Jay Cresswell has sent through some old photos of the last of the sailing Grand Bankers of Portugal from his personal collection.

The Lonely Men of the Dories footage shows the crews of the Portuguese Grand Banker schooners using the small wooden boats called dories for long-lining cod.

Luisa Ribau was the last sailing Grand Banker to be built, and was launched in 1953 and destroyed on the Grand Banks by fire in 1973.

A number of large Grands Banks schooners were built by the Portuguese after World War II, notably the four-masters Adelia Maria and Coimbra in 1948.

Collectively known as the White Fleet, the last departure of the schooners from St John’s in Newfoundland was the wood-built lugre named Novos Mares in July 1974. So ended the last significant chapter of trans-Atlantic commercial sail, an aspect that Jay remarks seems to be barely known about here in the UK, and which seems to have been missed by famous maritime historian Basil Greenhill when he was writing wrote his 1980 book Schooners, which was published by Batsford – although he did include the Canadian Bankers at the very end of the dory-schooner fishery on the Banks, and enjoyed rowing a dory on near his home towards the end of his life.

Perhaps he hadn’t heard about the Portuguese – the world was a bigger place in those days, and I suppose it’s a reminder that historians, like journalists and everyone else, can miss important points from time to time. What I find striking is the discovery that these large sailing fishing craft were working so late into the 20th century. When I grew up I remember everyone said that the days of large sailing craft were long over outside of sail training ships – but everyone was clearly wrong.

The Lonely Men of the Dories

Jay Cresswell has been in touch to tell us about some more video of the Grand Bankers of Portugal – see Comments in the left-hand column above left.

He’s also been in touch to say that within a few years, there will be as many as three restored four-masted schooners built in the 1930s for use in the Grand Banks fishing grounds.

But to return to the video, the material he has found is marvellous footage of the schooners, their wooden boats and the fishermen themselves – six sections of film titled The Lonely Men of the Dories – the link above goes to section 1, but the rest are linked below. By the way, don’t let the title you see in the Youtube pages worry you – the voiceovers are in English.

The Lonely Men of the Dories part 1

The Lonely Men of the Dories part 2

The Lonely Men of the Dories part 3

The Lonely Men of the Dories part 4

The Lonely Men of the Dories part 5

The Lonely Men of the Dories part 6

Flying 10s at the Lancashire Sailing Club long ago

Can anyone help Robert Macdonald please – he has written in to ask for photos and information about built examples of Flying Twelves.

I could only send him links to the posts we’ve had mentioning Flying Tens – see this and this. I should have added that early in intheboatshed.net’s career I met a pleasant elderly gentleman on a train who had sailed Twelves until recent years but I lost touch with him. The whole thing was too tantalising for words…

Anyway, this is what Robert has to say about his interest:

‘I’ve long been a fan of Uffa Fox. He has a legacy here in Toronto, Ontario where more than fifty Albacores race together every Friday night in the summer. I wish that some of his Flying Fifteens raced here as well!

‘While I was looking at the Uffa Fox website last year I discovered the Flying Twelve, the Flying Fifteen’s little sister. The idea of a sleek little planing keelboat the size of a dinghy got me hooked! I e-mailed Tony Dixon, Uffa’s nephew, and bought a set of Flying Twelve plans, which duly came in the mail. I’m not a boatbuilder and if I do build the Twelve, the project will be in many steps. I’ll probably first try a smaller flat sectioned boat, like a Mirror. If I ever do put a Flying Twelve in the water, it will be a solid and safe, and pretty boat.

‘Tony told me some about the design’s history and I found stuff on the Web (including Uffa’s wonderful story about designing the Fifteen), but there were no photos. Then I came across pictures here on intheboatshed.net of a Flying Ten at the Beale Park Boat Show; it’s the smallest of the Flying family, 14ft long, and designed for junior sailing. What immediately struck me was that it wasn’t a stubby version of the Fifteen, but slimly beautiful like its big sister. Which showed me what I wanted to see but don’t have a boatbuilder’s eye to see clearly from the plans – it’s clear that the Twelve would be a real pocket version of the Fifteen. So I’m grateful to intheboatshed editor Gavin Atkin for the pictures.

‘If you have a picture of a Flying Twelve and could forward it to Gavin (at gmatkin@gmail.com) to post for me and the world to look at, it would highlight the range of the Flying family of sailboats, and I would be very thankful. The story behind the picture would be just as good!

‘Robert MacDonald’

So… can anyoner out there help? If you can, please use the comment button below, or write to me directly at gmatkin@gmail.com and I will be delighted to pass the relevant material on to Robert.

Nathan Richie and Jeroen Porters built this Iain Oughtred-designed Tirrik at the Boatbuilding Academy and launched it at the big student launch on the 5th December.

Although set up as a rowing boat in these photos, the 16ft 10in Tirrik is Iain O’s take on a Ness boat. Double-ended, glued clinker in mahogany ply, the it has a beam of 5ft 4in, a centreboard and, since leaving the Academy, has been rigged as a sailing boat.

Nathan is going to use it to sail with his family. I gather the Tirrik will be featured in the next edition of Water Craft magazine, btw.

As the final photo shows, the designer called in on the Academy during the build – it was meant to be a brief visit, but he but ended up staying overnight and giving the students an impromptu lecture on boat design with illustrations.

Nathan was previously an IT consultant who owned a chain of clothing shops, but he always wanted to get into the marine industry and has previously earned RYA Yachtmaster and TDI diving certificates. It seems to run in the family, for while Nathan was at the Academy, his son Craig joined the 8-week woodworking skills course. They’re hoping to build a 40ft-ish boat when time and money allows.

Jeroenhas just applied for a job at the North Norwegian Boat Museum. He has also bought the plans for a Francois Vivier le Seil 18, which he plans to start building if – and when – he moves to Norway. His weblog of the course is online – it’s in Dutch but, even if you can’t read, it the photos are worth looking at.

The cut out components of Norman’s skiff wait to be taped and stitched together; the model on his desk proved the principle

Norman Fuller has started work on the rowing version of the Ella skiff, a simple 12ft stitch and glue flattie skiff named after my daughter. He lives in Norwich, close to the Norfolk Broads, and I gather intends to take it to the Barton Broad UK Home Built Boat Rally event in May – so let’s all wish him luck with his project. It’s looking good so far, and I’m pleased to see he built a model first.

Making a model is always a good first step, not least because it boosts the builder’s confidence in the design and the process.

For more on the rowing version of the Ella skiff, click here.

Barton skiff construction drawings

I’m shattered, but it’s been worth it because I’m now ready to share the key construction details of my simple stitch and glue outboard skiff designed for use with a low-powered outboard of 5hp or so – and certainly not much more, not least because the prop won’t fit!!!

I should add that my usual caveats apply here. I have no qualifications to design boats and make no claims for the performance or safety of this craft. I accept no responsibility for any accident or loss that may be incurred during building or use of this boat. What I have drawn must be regarded as experimental.

If you’re still interested, here are my key construction drawings: Barton-skiff-plans-package . Expect them to add up to around a meg, as I’ve included dxf files for those who like that kind of thing. I guess they will also be useful for anyone who wants to check a particular dimension. If anyone finds an error, please let me know!

The notes are sketchy to say the least, but I have it in mind that the bottom and frames should be of 1/2in ply, while the sides can be of 3/8ths. I’d advocate using marine ply, covering it well with glass and epoxy, and using gapped inwales of 2in by 1in, with 1in blocks.

There are people out there who will be relieved to know I’m about to get started on another VERY IMPORTANT NEW PROJECT! I’m saying nothing yet though – it has to remain a secret for now.

See some earlier posts relating to the Barton/Low power skiff project:

Low power skiff – the nested panels
Poole canoes – the motorised flat-bottomed skiffs of Poole Harbour
A model of the Low-power skiff
New low-power skiff sketches and model drawings

Here’s a fabulous piece of film following the crew of a Portuguese schooner fishing off the Grand Banks in the middle of the last century, complete with footage of dories stacked on deck and being rowed and lifted aboard, and the fishermen themselves hauling long lines, gutting fish, getting lost in fog and even attending the funeral of a fellow crew member.

The commentary feels a little over-cooked for our times – whoever wrote it may have been reading a little too much Hemingway – and the screen is a little fuzzy, but what it shows is priceless for anyone with an interest in this aspect of maritime history and the boats involved.

I’m grateful to the excellent Mal Nicholson, owner of the Humber supersloop Spider T (of which more soon!) for letting me know about it.

PS – The really good news is that several of these Grand Bankers are still alive and being renovated and restored by the Portuguese as Jay Creswell tells us in his comment below. Don’t miss what he has to say…

Another newly boat in the Boatbuilding Academy launch in December was an Iain Oughtred Auk built by Paul Braker and Joe Flynn. Piggly Wiggly is a 7ft 10in glued clinker design built in plywood, epoxy and mahogany, which  Paul will use as a tender for his current boat and to give he and his partner Sarah’s seven children something to mess about in.

Paul worked in IT until the economic situation made him look at what he really wanted to do – and he chose boat building.

My thanks to the Academy’s Yvonne Green for the photos.

The nested panels for the Low-power skiff. Click on the thumbnail above for a larger image

This may not look like much to you, but to me it represents the latest stage in quite a few hours work, first defining the overall form of the 16ft small outboard skiff project I’m working on for a friend, then developing the panels required to create it, and then figuring out how to nest them into 4 by 8ft panels of ply for stitch and glue construction with the least waste.

As you can probably imagine, it’s been keeping me busy lately – and I need to get it out of the way because I have a VERY IMPORTANT new project to start and complete. Watch out for that, if you’re interested…

What are all the components I’ve plotted here? The top row are the heavy weights – the 1/2in components including the breasthook, bottom, central girder (my friend asked for that to ensure the bottom came out the right shape), the main frames, and the doubled frame on which we’re going to hang the outboard. The bottom row are the 3/8ths components, including the sides, bits of decks and so on. The next task is to plot about a million coordinates to enable my pal to cut the thing out accurately, and with all these parts to work with the task should keep both of us busy for some time!

One thing that doesn’t appear here that I’m also thinking about is a proper name, and I have to say that I haven’t thought of one that seems to suit it. I did wonder about naming it after my grandmother, whose name was Elsie, but she wasn’t exactly low powered. Then I thought about our sweet pet dog during my childhood, but her name, Sooty, doesn’t seem to fit. And then I thought about my elegant sister – but I suspect she wouldn’t thank me for naming a fairly utilitarian boat design after her. So how about a place name? How about the Barton skiff, which might be named after the place where I first conceived the notion that such a boat should exist. What do you folks think? Does this design look like it could be called the Barton skiff to you?

To find out more about this low-powered outboard skiff project, click here and here, and, for something I learned about after drawing this skiff and which seemed to endorse my concept, click here.

ALSO – see the latest post on this project.

John  Watson and Dave Snelling’s 12 1/2 Haven on student launch day in December

John Watson and build partner Dave Snelling built the Joel White Haven 12 1/2 version of Nat Herreschoff’s 12 1/2 Buzzard’s Bay Boy’s Boat during their course at the Builtbuilding Academy, reports principal Yvonne Green.

While the original design has a full keel, the Joel White version has a centreboard, making it possible to bring the boat into  shallow waters and easier to trailer. The boat is Douglas fir strip planked and sheathed in glass fibre, has a cast lead ballast keel, and is 15ft 11in in length with a beam of 6ft 1in.

Neither John nor David were doing practical work before they came on the course at Lyme – for the last thirty years John has worked in corporate law in America, while Dave, although he worked in the marine industry at the beginning of his career, has been working in IT. Yvonne says the boat was quite an achievement, but John and Dave were incredibly focused on the course and worked steadily to complete it in the six months they had on the main workshop floor.

Rob Roy canoe gear – click on the drawing for a larger image

I’ve just learned that Mersey Canoe Club member Tony Bibbington last year sailed and paddled from Oslo to the Baltic, following Victorian pioneer John MacGregor’s paddle-strokes all the way. My thanks to Brian Smith for letting me know about this, and for pointing out that there are some great photos online at http://www.duene1.de – click on the 2009 calendar and then on Nov 4, and you will find photos of his trip round Heligoland.

It was a 500km trip that he had to complete in three weeks due to the that old enemy work, but perhaps the most jaw-dropping aspect of the whole thing is that Tony was  determined to follow exactly the same route as his hero and did so using a 138-year old original Rob Roy canoe made by Sewells of London that he restored himself.

This insistence on following Macgregor’s route caused a few problems along the way – the first  of which was that the spot from with Macgregor first launched his canoe in Norway is now someone’s back garden. Thankfully, the owner proved friendly and Tony was on his way.

An article in the magazine Canoe Focus tells the story of a varied journey, sometimes tedious, sometimes  beautiful, and with plenty of incidents worth retelling, with Tony dressing as a Victorian gentleman canoeist and meeting an artist determined to paint his portrait; moments where, like Macgregor before him, Tony had to drag his canoe out of a stream water and use a car or other means to reach the next patch of water; and a final landing in which he landed inside the perimeter of a factory security fence. Luckily, on that occasion his path was smoothed by the security man who had read about Tony’s expedition in the newspapers.

How did Tony get on with his canoe, and how did she stand up to the journey more than a century after she was first made? In the Canoe Focus article Tony himself was happy to quote Macgregor: ‘The Rob Roy has proved herself able ”to sail steadily, to paddle easily, to float lightly, to turn readily, and to bear rough usage on stones and banks, and in carts, railways and steamers; to be durable and dry, as well as comfortable and safe” just as she was originally designed to be. MacGregor’s theory was that ”a canoe ought to fit a man like a coat”. The Rob Roy had been a perfect fit on my journey and I look forward to our next adventure.’

I think the whole thing is an extraordinary story with at least four heroes in addition to old John Macgregor himself: Tony for being brave enough to set out on an arduous 500km paddling and sailing trip in unknown country  in a 138-year old canoe, his family for travelling with him and enabling him to make the journey in a modern age without horses and carts in wide use in remote areas, and the dear old boat itself.

For more on Macgregor, click here; to read Macgregor’s account of his own trip to the Baltic, click here.

Bill Whalen of the Crystal River Boat Builders chapter of the Traditional Small Craft Association in the USA has been in touch to say the group is building the 14ft flattie skiff recorded and published by H I Chappelle that I mentioned here a couple of years ago. At the time I suggested that it might make a worthy and good-looking boatbuilding project for many people, and I still think so as this year’s boat-dreaming season hots up.

Chappelle includes the lines and a description of the boat in his classic American Small Sailing Craft, which is thankfully still available.

From the photos above it’s clear Bill and his pals have built themselves a splendid boat shed, and are using a gratifying amount of white lead and suitably good looking timber in line with their motto ‘Our emphasis is on tradition… ‘ .

See what they’re up to at their website: http://www.tsca.net/CRBB

16ft gentleman’s runabout Lola, built to a design by C G Petterson, and photographed at the Boatbuilding Academy’s student launch day in December

Lars Herfeldt built this very pretty motorboat during his Boatbuilding Academy course at Lyme using plans by the Swedish designer CG Pettersson.

Academy principle Yvonne Green reports that Lola, which is named after one of Lars’ grandchildren, is a 16ft cold moulded motorboat made from two layers of 3mm plywood with a final layer of mahogany veneer laid fore and aft to simulate a more traditional carvel planking construction.

While on the course Lars wrote a weblog that includes the boat build but also of his life while living at the Academy on the course – it’s in German but includes many excellent photos including a series showing one of the famous Beer luggers going about. He also played Father Christmas at the Academy Christmas dinner, at which Yvonne says he managed to look as if he’d stepped out of a Norman Rockwell illustration.

For more photos from the student launch, check out Edward Pearson’s Picasa photo set of the event.

Intheboatshed.net readers may be interested to know that Lars is returning to the Academy in September to instruct a residential course on building West Greenland kayaks in September, at which up to eight students will build a traditional kayak over ten days – course members will stay at nearby Trill Farm and build the boats in the farm’s  magnificent old barn.

Many thanks for the story Yvonne – and don’t forget to tell us more about the kayak course, as I think there will be some interest from readers!

Tamar salmon boat Gloria Marcella. Click on the thumbnails for bigger images

Stirling and Son are currently building some smaller boats after having had to relocate to a garage while they organise themselves some new premises – for some years they were based at Morwelham Quay, which is sadly now in administration.

To prevent misunderstanding, I should explain that the garage is a temporary arrangement and that the outfit will be moving to new premises to begin a new 44ft project by the end of this month. Meanwhile, however, Will and his colleagues have been hard at work, as he reports, and have sent in these very nice shots of a Tamar salmon boat in build:

‘Two recent new builds in the garage have been a 17ft salmon boat for the river Tamar and an 11ft pilot’s punt for a pilot cutter.

‘One of the elder salmon fisherman, Alec Scoble, who has net fished the Tamar in wooden boats since the 1950s has ordered a new boat in preparation for the renewal of the fishing licences, which have been suspended since 2004.

‘In order to increase the viability of the boat, Alec’s son Colin Scoble will net fish with tourists in the traditional manner, tagging and releasing the fish for the National Rivers Authority. Also as a continuation of the family tradition Alec’s grandson, Sam Scoble, helped build the boat.

‘There were no plans for Tamar salmon boats; it seems most likely that none have ever existed, so in order to record the shape for the future, I created a draught of the shape based on dimensions given by Alec. Before planking small alterations were made to the forward moulds following an inspection by Alec and his friend Frankie, who had both fished the river since War War II. The draught was altered accordingly and is now held by the National Maritime Museum at Greenwich.

‘The boat is named in memory of Alec’s wife Gloria Marcella, and  has an oak backbone and framing with spruce planking; all fastenings are copper and bronze.’

‘Best wishes, Will’

Will does seem to have the knack of finding some great projects!

Stirling and Son are offering plans for a traditional general purpose 9ft clinker-built dinghy and an 11ft pilot punt of 1900. For more on these, see this earlier post.

Jay Cresswell’s model of Ribhinn Donn I, and (bottom right) Antonia & Ruaraidh

This stunning model of a ring netter has been made by Jay Cresswell, an ex-trawler skipper, long-standing Old Gaffers Association member and authority on marine history who has for many years lived near Aberdeen.

He writes:

‘You might like to see the attached. I’ve nearly completed a 3/4in to 1ft model of the 54ft Alex Noble & Sons-built ring netter Ribhinn Donn I. (Her sister is Silver Quest, which is currently sitting in the mud at Penryn down by Falmouth.)

‘I still have to complete rigging details, wheelhouse interior and other bits and pieces such as semi-balancing edge to rudder. The bottom is quite literally anti-fouled. The model is built from original yard drawings for these two boats.

‘This is the second ringer I’ve tackled, the other being a Weatherhead & Blackie 56-footer to same scale named Antonia & Ruaraidh after my two oldest children. (See above.) The original boat in this case is the Catherine Anne, which was chopped up a few years ago in one of the UK fishing vessel decommissioning rounds.

‘I hope you like the images. It’s been a year’s worth of spare time. There are no metal fastenings in the hull, with all planking dowelled to the frames.

‘Regards, Jay Cresswell, Aberdeen’

I certainly do like them Jay – you’ve created a couple of meticulous models that rival or better many of those seen in museums. I particularly like the way every detail seems to be properly to scale. Many thanks for sending them over.

It’s almost impossible to pick out my favourite posts of the year – there are simply too many, and for too many different reasons.

For example, the editor-residents of Intheboatshed.net Towers would have no difficulty picking out the students’ launch at the Boatbuilding Academy in December, but for entirely different reasons we’d equally easily choose the astonishing details of the wherry yacht Hathor, or the various posts on the zulus of the Scottish West Coast, or the review of the lovely new book Holmes of the Humber, or, for that matter, the story of the Iain Oughtred-designed St Ayles skiff and the Scottish Coastal Rowing Project.

And how remiss would we be if we failed to mention Ben Crawshaw’s awesome sailing exploits in his Light Trow, or Dylan Winter’s wonderful Keep Turning Left videos about sailing anti-clockwise around the coasts of Great Britain? I’d like to offer my apologies if I’ve left out your favourites here, but I’m working from memory here – I simply haven’t got the energy required to re-read the 250-or so posts I’ve put up this year.

With the hit-counter below cruising gently towards our millionth, what were readers’ favourite posts? There seems little doubt that the posts that have caught most people’s interest have been about free boat building plans. For example, the post announcing the boatbuilding plans for the Julie skiff 15ft 8in plywood flattie rowing boat has been viewed a whopping 27,647 times. We think it goes to show how powerful is the draw of free plans – but also how effective an advert on this site can be.

A little behind that comes a favourite with model makers and admirers of small Scottish skiffs, A challenge for home boatbuilders: a sweet 10ft clinker-built double-ended skiff, our boatbuilding plans for the sailing version of the 12ft plywood Ella skiff and for the boatbuilding plans for the Sunny 14ft plywood rowing flattie.

Why not let us know what your favourites of the year might have been? We’re very friendly and can be reached at gmatkin@gmail.com.

What will next year bring at intheboatshed.net? It’s impossible to say who will be in touch and what they may send me for publication. I only hope they continue to do so. In the meantime, I can tell you about two projects that are in the works here, the Low -power outboard skiff, and a mark II stitch and glue version of the well tried Light Trow rower-sailer in both its rowing and sailing versions.

Dungeness, Christmas 2009. The first and penultimate photos are Julie’s – the rest are mine

Dungeness is one of my favourite places on the coast round here, and so as the day after Boxing Day dawned cold and windy but with occasional gaps in the clouds we drove down for a meal of locally caught fish and deep-fried chips, and for a stroll on the gravel bank.

It’s an extraordinary place. The site of a classic English South-Coast beach-launched fishing fleet, we’re told that it is the largest area of beach shingle in the world, and that it has been classified as an arid desert. A small community lives here in a variety of wooden huts, many of which are built around condemned railway carriages, and of course there’s the astonishing miniature Romney, Hythe and Dymchurch Railway to provide colour and entertainment.

On a day with better light than we had it’s also a gift for photographers, for as the gravel area has slowly grown, a variety of old boats,  sheds, boilers, winches and other leftovers from generations of fishing in the area have been left behind on the landward side.

At the top of this post I’ve added some fairly self-explanatory shots (readers will notice the tubby and hard bilged-lines  typical of traditionally-built South Coast beach boats), but at the bottom I’ve added a couple of photographs of a restored tanning boiler that has been refurbished as a monument to three local men and their industry – the plaque includes at least one local family name that I recognise. I’m reminded that there are said to be people in the area who still remember and occasionally sing a local version of the song The Wreck of the Northfleet. If anyone is out there who can help me, I’d love to get in touch with one of them! Please contact me at gmatkin@gmail.com .

The locally caught fried fish (and chips) is excellent at the Pilot Inn, and there’s usually fresh fish available to take home from the local fishermen, and when it’s open the old lighthouse is worth a visit. All in all, if you’re ever in the area, I’d recommend calling by for a look round. It’s a grim kind of spot as you’ll see from the photos, but I’d happily live there – though I daren’t say so too often as my family already think I’m half potty.