The latest Water Craft will be with us any day

It’s almost time for the next edition of Water Craft magazine to land on our doormats – so what’s in store this time around? Lots of boating goodies as usual – including the first of two big features by our friend Ben Crawshaw in which he reports on his adventures sailing his Light Trow named Onawind Blue. That feels like a real privilege, I must say, even though I’d prefer to seem my design used for rather less extreme adventures…

Here’s what Water Craft editor Pete Greenfield has to say about the upcoming issue:

So – how has boat craftsmanship, amateur and professional, fared through the long hard winter and the much longer and harder recession? In W80, we seem to have some of the answers.

Interestingly, for many professional wooden boat builders, the answer seems to be they are managing rather nicely thank you… though mostly with repairs rather than new builds.

At Peter Freebody & Co, for example, spiritual home of so many traditional Thames craft, Melanie Freebody tells Kathy Mansfield there may be snow on the roof but the boatshops beneath have rarely been busier.

Giving up the well-paid but stressful job in IT to learn to build wooden boats is a good idea for some. Certainly, on a dark dank morning in December when the students of 2009 launched the fascinating variety of craft they’d built at the Boat Building Academy at Lyme Regis, our Dick Phillips detected little stress… though maybe the champagne helped.

No nerves on the part of our tame amateur boatbuilder Peter Goad either, when Messrs Phillips and Chesworth turned up to sail the Cape Henry 21. Perhaps, as Peter explains in his final fit-out article, a five-year project encourages a relaxed and patient frame of mind.

Watch, on YouTube.com, Ben Crawshaw’s reports on sailing a small boat in the Med and you’ll see rather more evident anxiety. And reading about how he built his first boat, a slender lugger called a Light Trow intended for more sedate waters, in a public garden in Spain, you’ll encounter few manyana moments.

More sail than oar but definitely a craft to cope with exhilarating sea sailing, we think Paul Gartside’s free plans, complete with lines and offsets, for his 20ft (6m) lugger will persuade many a putative backyard boatbuilder to stop saying manyana and take the plunge.

As may the editor’s outdoor boat….

But outdoors, as Colin Henwood of Henwood & Dean Boatbuilders explains in his masterclass on painting and varnishing is not the ideal place to give your boat the finest finish for the new season. You need a big tent, kind-of like Water Craft itself.

Buy a subscription now (see the link in our right-hand column here at intheboatshed.net and pay with your credit card via PayPal) or find the March-April Water Craft in your local newsagents – to find a stockist in the UK see http://availability.mmcltd.co.uk

If you’d like to receive a weekly intheboatshed.net newsletter sign up here.

Flying 10s at the Lancashire Sailing Club long ago

Can anyone help Robert Macdonald please – he has written in to ask for photos and information about built examples of Flying Twelves.

I could only send him links to the posts we’ve had mentioning Flying Tens – see this and this. I should have added that early in intheboatshed.net’s career I met a pleasant elderly gentleman on a train who had sailed Twelves until recent years but I lost touch with him. The whole thing was too tantalising for words…

Anyway, this is what Robert has to say about his interest:

‘I’ve long been a fan of Uffa Fox. He has a legacy here in Toronto, Ontario where more than fifty Albacores race together every Friday night in the summer. I wish that some of his Flying Fifteens raced here as well!

‘While I was looking at the Uffa Fox website last year I discovered the Flying Twelve, the Flying Fifteen’s little sister. The idea of a sleek little planing keelboat the size of a dinghy got me hooked! I e-mailed Tony Dixon, Uffa’s nephew, and bought a set of Flying Twelve plans, which duly came in the mail. I’m not a boatbuilder and if I do build the Twelve, the project will be in many steps. I’ll probably first try a smaller flat sectioned boat, like a Mirror. If I ever do put a Flying Twelve in the water, it will be a solid and safe, and pretty boat.

‘Tony told me some about the design’s history and I found stuff on the Web (including Uffa’s wonderful story about designing the Fifteen), but there were no photos. Then I came across pictures here on intheboatshed.net of a Flying Ten at the Beale Park Boat Show; it’s the smallest of the Flying family, 14ft long, and designed for junior sailing. What immediately struck me was that it wasn’t a stubby version of the Fifteen, but slimly beautiful like its big sister. Which showed me what I wanted to see but don’t have a boatbuilder’s eye to see clearly from the plans – it’s clear that the Twelve would be a real pocket version of the Fifteen. So I’m grateful to intheboatshed editor Gavin Atkin for the pictures.

‘If you have a picture of a Flying Twelve and could forward it to Gavin (at gmatkin@gmail.com) to post for me and the world to look at, it would highlight the range of the Flying family of sailboats, and I would be very thankful. The story behind the picture would be just as good!

‘Robert MacDonald’

So… can anyoner out there help? If you can, please use the comment button below, or write to me directly at gmatkin@gmail.com and I will be delighted to pass the relevant material on to Robert.

Rob Roy canoe gear – click on the drawing for a larger image

I’ve just learned that Mersey Canoe Club member Tony Bibbington last year sailed and paddled from Oslo to the Baltic, following Victorian pioneer John MacGregor’s paddle-strokes all the way. My thanks to Brian Smith for letting me know about this, and for pointing out that there are some great photos online at http://www.duene1.de – click on the 2009 calendar and then on Nov 4, and you will find photos of his trip round Heligoland.

It was a 500km trip that he had to complete in three weeks due to the that old enemy work, but perhaps the most jaw-dropping aspect of the whole thing is that Tony was  determined to follow exactly the same route as his hero and did so using a 138-year old original Rob Roy canoe made by Sewells of London that he restored himself.

This insistence on following Macgregor’s route caused a few problems along the way – the first  of which was that the spot from with Macgregor first launched his canoe in Norway is now someone’s back garden. Thankfully, the owner proved friendly and Tony was on his way.

An article in the magazine Canoe Focus tells the story of a varied journey, sometimes tedious, sometimes  beautiful, and with plenty of incidents worth retelling, with Tony dressing as a Victorian gentleman canoeist and meeting an artist determined to paint his portrait; moments where, like Macgregor before him, Tony had to drag his canoe out of a stream water and use a car or other means to reach the next patch of water; and a final landing in which he landed inside the perimeter of a factory security fence. Luckily, on that occasion his path was smoothed by the security man who had read about Tony’s expedition in the newspapers.

How did Tony get on with his canoe, and how did she stand up to the journey more than a century after she was first made? In the Canoe Focus article Tony himself was happy to quote Macgregor: ‘The Rob Roy has proved herself able ”to sail steadily, to paddle easily, to float lightly, to turn readily, and to bear rough usage on stones and banks, and in carts, railways and steamers; to be durable and dry, as well as comfortable and safe” just as she was originally designed to be. MacGregor’s theory was that ”a canoe ought to fit a man like a coat”. The Rob Roy had been a perfect fit on my journey and I look forward to our next adventure.’

I think the whole thing is an extraordinary story with at least four heroes in addition to old John Macgregor himself: Tony for being brave enough to set out on an arduous 500km paddling and sailing trip in unknown country  in a 138-year old canoe, his family for travelling with him and enabling him to make the journey in a modern age without horses and carts in wide use in remote areas, and the dear old boat itself.

For more on Macgregor, click here; to read Macgregor’s account of his own trip to the Baltic, click here.

16ft gentleman’s runabout Lola, built to a design by C G Petterson, and photographed at the Boatbuilding Academy’s student launch day in December

Lars Herfeldt built this very pretty motorboat during his Boatbuilding Academy course at Lyme using plans by the Swedish designer CG Pettersson.

Academy principle Yvonne Green reports that Lola, which is named after one of Lars’ grandchildren, is a 16ft cold moulded motorboat made from two layers of 3mm plywood with a final layer of mahogany veneer laid fore and aft to simulate a more traditional carvel planking construction.

While on the course Lars wrote a weblog that includes the boat build but also of his life while living at the Academy on the course – it’s in German but includes many excellent photos including a series showing one of the famous Beer luggers going about. He also played Father Christmas at the Academy Christmas dinner, at which Yvonne says he managed to look as if he’d stepped out of a Norman Rockwell illustration.

For more photos from the student launch, check out Edward Pearson’s Picasa photo set of the event.

Intheboatshed.net readers may be interested to know that Lars is returning to the Academy in September to instruct a residential course on building West Greenland kayaks in September, at which up to eight students will build a traditional kayak over ten days – course members will stay at nearby Trill Farm and build the boats in the farm’s  magnificent old barn.

Many thanks for the story Yvonne – and don’t forget to tell us more about the kayak course, as I think there will be some interest from readers!

It’s almost impossible to pick out my favourite posts of the year – there are simply too many, and for too many different reasons.

For example, the editor-residents of Intheboatshed.net Towers would have no difficulty picking out the students’ launch at the Boatbuilding Academy in December, but for entirely different reasons we’d equally easily choose the astonishing details of the wherry yacht Hathor, or the various posts on the zulus of the Scottish West Coast, or the review of the lovely new book Holmes of the Humber, or, for that matter, the story of the Iain Oughtred-designed St Ayles skiff and the Scottish Coastal Rowing Project.

And how remiss would we be if we failed to mention Ben Crawshaw’s awesome sailing exploits in his Light Trow, or Dylan Winter’s wonderful Keep Turning Left videos about sailing anti-clockwise around the coasts of Great Britain? I’d like to offer my apologies if I’ve left out your favourites here, but I’m working from memory here – I simply haven’t got the energy required to re-read the 250-or so posts I’ve put up this year.

With the hit-counter below cruising gently towards our millionth, what were readers’ favourite posts? There seems little doubt that the posts that have caught most people’s interest have been about free boat building plans. For example, the post announcing the boatbuilding plans for the Julie skiff 15ft 8in plywood flattie rowing boat has been viewed a whopping 27,647 times. We think it goes to show how powerful is the draw of free plans – but also how effective an advert on this site can be.

A little behind that comes a favourite with model makers and admirers of small Scottish skiffs, A challenge for home boatbuilders: a sweet 10ft clinker-built double-ended skiff, our boatbuilding plans for the sailing version of the 12ft plywood Ella skiff and for the boatbuilding plans for the Sunny 14ft plywood rowing flattie.

Why not let us know what your favourites of the year might have been? We’re very friendly and can be reached at gmatkin@gmail.com.

What will next year bring at intheboatshed.net? It’s impossible to say who will be in touch and what they may send me for publication. I only hope they continue to do so. In the meantime, I can tell you about two projects that are in the works here, the Low -power outboard skiff, and a mark II stitch and glue version of the well tried Light Trow rower-sailer in both its rowing and sailing versions.

Poole canoes, photographed by John Lockwood

Home Built Boat Rally UK (HBBR) member John Lockwood has sent me these photos of a British Isles flattie I hadn’t known about until recently: the oddly-named Poole canoe.

The British Isles aren’t generally thought of as the home of flat-bottomed boats, and I can’t tell you how often I have told me that a flat-bottomed boat can’t work. And yet, there are quite a few around our inland waters and even on our coasts, including the turf boats and flatners of Somerset, the punts of the Rivers Thames and Cam, various gun punts, the Fleet trow and the Wexford cot. And, of course, going up-scale a range of lighters and coastal barge types including the celebrated Thames barge have flat bottoms.

So I was pleased a few weeks ago to learn of the Poole canoe a few weeks ago, and I’m now grateful to John for capturing these slender flattie skiffs with his camera before the original wooden boats disappear. I have the impression that they range up to around 22ft by 4ft or a little over. Thanks for the informative shots John!

A message from ‘Tranona’ on the PBO forum suggests that the boats built in the area for use in Poole Harbour were built by eye – and that British Seagull proprieter Mr Weyhope spent years experimenting to get the best speed out of the boats driven by a Seagull 102 model, which I’d guess was a 2hp type. Looking at the boats in these pictures, they mostly have the small amount of rocker I would expect for a low powered boat, though one or two seem to have rather flatter runs, which would suggest they were intended for a bigger power plant.

In this connection, some weeks ago I put up a post linking to an online ad in which someone was selling an old Seagull outboard still in its original packaging, and accompanied by a set of drawings for building a flat-bottomed skiff, which I suppose is likely to be one of Mr Weyhope’s designs. I’ve posted a tiny thumbnail of the drawings at the bottom of this post, and although it only affords a little information there seems little doubt that the ‘20ft trunnel boat‘ it presents is a Poole canoe, or something very like it.

I must say that I’m particularly interested in these boats at the moment, as they are so similar to a design project I’ve been working on for a friend for some time, and I can’t help feeling that they’re a kind of endorsement of the basic idea.

My project is a little different – my ‘client’ wanted a flat-bottomed design he could build in his garage and that would work with a 4-5hp motor rather than Mr Weyhope’s 2hp model – but the drawings I made before I’d even heard of the Poole canoe seem very like the South Coast boats. See my initial drawings here.

I plan to complete them as soon as I can decide whether the end of the prop should be inside or outside the transom when raised – I notice that the long wells seen in most of these photos imply that the prop is inside the well when the motor is raised – and yet I wouldn’t want to find a flailing prop in my well after hitting an underwater obstruction. Does anyone have any insights on this question?

By the way, I gather GRP Poole canoes are still made for fishermen by Salterns and that the yard has developed a higher powered 22ft model designed for sun bathing, fishing and exploring Poole Harbour, and powered by a 30hp electric start outboard. It even comes with a sun deck, picnic table, cool box, navigation lights, fishing rod holders, a tray in the stern for ring netting and flush decks. All of that seems a long way from the boats in the photos!

Thanks for the shots John!

‘After taking on supplies at Gravesend, I shoved off into the tide, and lit a cigar, and now I felt we had fairly started,’ wrote philanthropist, barrister and pioneer of the Victorian canoeing craze, John MacGregor in his classic A thousand miles in the Rob Roy canoe.

He seems to have been a highly entertaining if largely bonkers character, from what we learn from this article published in Sea Kayaker Magazine.

I really must get around to reading Macgregor’s book myself!

See this post for construction information and ‘plans’ for Rob Roy-style canoe described by Neison in his book Practical boatbuilding for amateurs.

Reader Brian Pearson has kindly given me permission to put up a few of the photos he and his son took of the Boatbuilding Academy’s student launch day last Saturday. Thanks Brian!

He tells me that it was a really nice event with lots of people, a watery winter sun – which was great after all the terrible weather we’ve been having – and lots of lovely boats and happy boat builders with their families.

There will be more when principal Yvonne Green manages to send some over together with details of the boats, as I hope she will – and perhaps with luck the students themselves will chip in also.

I must say there are some delightful pieces of work here – particularly the pram with no metal components of any kind. Take a bow, boatbuilding students of Lyme!

Some of the boats Academy students have built in the past: Sadie Snowdon’s dory; Johnny Tyson’s whitehall; Edward Hoogewerf’s Ebihen;Marc Chivers’ pilot punt; Bob Hinks’ Cirrus; and Charlie Hussey’s Seapod the Peapod

If you’re in the area, don’t forget the Boatbuilding Academy’s students are due to launch their boats at Lyme on Saturday, starting at 8.30am. Read this earlier post to find out what boats will be included this year.

Eel, drawn by her skipper and designer, George Holmes

Now that my copy has arrived, Tony Watts’ book Holmes of the Humber seems bigger than I’d expected. This is seriously good news, for although it isn’t quite coffee-table book sized, it’s nevertheless big enough to do justice to old George Holmes’ lovely illustration work.

There are also several intriguing photos of the man himself – they’re fascinating because he is so much everybody’s idea of what a slightly eccentric Edwardian uncle really should look like, and rather at odds with his own whimsical depictions of himself in drawings.

I should also add that it’s packed with an impressive amount of material, much of it drawn or written or both by the man himself. As I leaf through the pages I’m struck by how many pages are made up of a mixture of drawings and hand-written text, and can’t help wondering whether this may have been where Alfred Wainright – consciously or unconsciously – found his inspiration for his meticulously hand-written and illustrated books about the Lake District.

The chapters start with his early years, and include a map of the rivers and coast of much of Yorkshire and also the rivers of Lincolnshire. This map is essential to understanding much of the content of this part of book. Quite quickly Watts moves on to material from the Eel years, including a charming draftsman-like drawing of the boat itself and her dinghy Snig quickly followed by an equally sweet page of comic-book style drawings depicting Eel’s first cruise and accompanied by captions including 11pm May 26 1897 Hornsea Beach. Waiting followed by Midnight May 28 1897 Hauling through the surf, then A bit lumpy off the Newsand Noon May 29 1897, Passing the Bull Lightship 2pm May 29 and finally Moored at Ferriby Sluice. May 29 1897.

Holmes’ illustrations and texts just go on and on – the Eel years alone runs to 60-something pages. There’s a nice chapter of descriptions of some of the Humber’s local boat types including the crab boat, the Goole billy boy, the Humber duster, the Paull shrimper and of course an illustration of how a smack’s boat is converted into a blobber, complete with small cutter rig and cozy – but unstable-looking – house.

It’s notable that the up-river blobbers had much taller houses, which went neatly with having no rigs – at least in Holmes’ illustration.

After 15 years with the little 21ft Eel, Holmes moved on to the 28tft Snippet in search of greater comfort – as he says ‘there had come a slight increase in my beam, a disinclination to bend and a desire for standing headroom below’. The early Snippet drawings are then immediately followed by more of Holmes’ comic book-style annotated drawings – this time scenes from his first cruise with Snippet on the Norfolk Broads.

There’s another section of Holmes’ descriptions of various sailing areas including the tidal Trent and the Upper Humber, the Rivers Ouse and Hull, and – astonishingly to me – the River Ancholme. I should explain that the Ancholme lies just a few miles from the small North Lincolnshire town where I grew up, and was pleasantly pleased to recognise some scenes from the river that I haven’t seen since is was a boy, including, of course, the bridge at Brigg, from where the delightful but rarely sung traditional song Brigg Fair got its name.

There’s a short section on Holmes the artist, followed by another on his boat designs including canoe yawls Cassy; the first, second and third Ethel; Daisy; Yum-Yum; Kittiwake; Redwing; T’Rotter; Trent; Design No 7 and Ripple. If you’re in search of material about canoe yawls, you certainly won’t feel let down, but this chapter also includes some ‘house boats’, which are really like more conventional yachts, and a curious round-bottomed barge yacht.

And, finally, there’s what looks like a comprehensive list of Homes’ designs and boats compiled by Albert Strange Association technical secretary Richard Powell.

At £25, Holmes of the Humber isn’t cheap, but it’s a heck of a good package that’s well worth the money. If you’re at all interested in Holmes this book should certainly be on your wish list this Christmas! See http://www.lodestarbooks.com for information.

Boat designer Paul Butler’s website includes a really helpful page of practical tips and ideas for boat users who want to add various types of canvas shelter – it will be particularly useul if you wish to cover-in a yacht or motorboat’s cockpit, or wish to sleep aboard a dinghy.

And, while you’re there, why not take a peek at his boat plans?

Some of the boats Academy students have built in the past: Sadie Snowdon’s dory; Johnny Tyson’s whitehall; Edward Hoogewerf’s Ebihen;Marc Chivers’ pilot punt; Bob Hinks’ Cirrus; and Charlie Hussey’s Seapod the Peapod

Boatbuilding Academy principal Yvonne Green and colleagues have extended an invitation to intheboatshed.net readers to see students launch their boats at Lyme, starting at 8.30am on the 5th December.

The boats are an interesting collection, and will include:

• an 8ft traditional pram dinghy built using trunnels and without adhesives or metal fixings
• a 16ft 6in half-size sgoth niseach
• a 16ft cold-moulded motorboat based on a design by C G Pettersson
• a 15ft 11in Haven 12 1/2 designed by Nathaniel Herreschoff
• a 16ft 10in double-ended clinker Tirrik designed by Iain Oughtred
• a 15ft Chestnut strip-built canoe built from Western red cedar
• a 7ft 10in Auk glued clinker dinghy, again designed by Iain Oughtred

I won’t be able to make it – I live in Kent – but I hope the weather gets better by early December, as I doubt there’s a boatbuilder in the world who would want to test their boats for the first time in the kind of wind we’ve been having too much of lately!

By the way – if any readers do manage to get along and would like to send in some photos and their impressions for publication, I’d love to receive them at gmatkin@gmail.com!

For more on the Boatbuilding Academy, click here!

Forgive me, for I have sinned – I have quietly been enjoying Dylan Winter’s video series Keep Turning Left and have failed to mention it for far too long.

If you haven’t seen his Youtube videos about slowly sailing around our coast in an anti-clockwise direction, you should – and soon.

He’s up to over 40 episodes now and they look and sound great,  I have to say. Dylan makes excellent use of a camera, and he’s an entertaining and informative commentator with whom I find I usually agree. He’s interested in sailing, landscapes, history, the way we use our planet and in almost any kind of boat that doesn’t have a large engine and doesn’t have to move a huge amount of water to get somewhere, and films and talks about all of them.

Ah, sailing slowly around the country. I suppose I should mention that I’m prejudiced in all this. The whole idea makes me envious to the point of losing my marbles!

Holmes of the Humber is a new book by long-standing Humber Yawl Club member Tony Watts. But just who was the book’s subject, George Holmes? The publisher’s notes tell the story so well, I repeat them here just as they appear on the fly-leaf:

‘George Holmes lived from 1861 to 1940 on the northern side of the Humber estuary. He was an avid and accomplished sailor in small craft of his own design, in British waters and in mainland Europe, and his prolific writing and drawing have left us an absorbing and charming record of his cruises, his boats, and the people and places he encountered.

‘In common with his friend and sailing companion Albert Strange, boats were not his regular occupation but were a diversion from his working life. And along with Strange, his name is forever associated with the development of the Canoe-Yawl, now enjoying a renewed popularity. Its sailing qualities make it arguably the best choice of craft for the single- or short-handed coastal and estuary sailor.

‘Holmes of the Humber is a nautical book and a social document. Look within to appreciate the pioneering days of cruising under sail, when enjoyment and fulfilment sprang from personal endeavour and the camaraderie of the group, and were largely independent of the external forces which would control us today.

‘Tony Watts has combined original sources, Holmes’ published output and the recollections of his family, and his own knowledge and experience of the Humber sailing scene to produce this, The Essential George Holmes.’

For more information and sample pages from the Lodestar Books webpages, click here: Holmes of the Humber.

Don’t miss something good – sign up using the link below to start receiving the free weekly intheboatshed.net newsletter.

Holmes of the Humber – a new book about George Holmes

Dick Wynne of the Albert Strange Association has been in touch to say that a new book on artist, writer, sailor and boat designer George Holmes written by Tony Watts is about to burst onto the scene on the 1st December.

That’s good timing I’d say – and I’d guess this first book from the Lodestar Books imprint will be a popular item on many people’s Christmas shopping list this year.

I’ve been promised a chance to see the book in advance – so expect to hear more about Holmes of the Humber here in the next few weeks.

Click here for more information and sample pages from the Lodestar Books webpages: Holmes of the Humber.

PS – Check the Albert Strange Association website for what looks like the beginning of a heart-warming story about a boat the may have been designed by McLean Gibson.

Don’t miss something good. Sign up below to start receiving the free weekly inthboatshed.net email newsletter.

Water Craft’s latest issue marks the beginning of the boatbuilding season, which editor Pete Greenfield says begins when the sailing season ends.

It has pretty well ended here in the temperate zone of the Northern Hemisphere, but I’m not so sure that the boat building starts quite yet. But I do think November and the run up to Christmas is a time when many of us get into some serious boat-dreaming and boat noodling – my name for the delicious process of thinking through what kind of boat we want, what we’re capable of building and what would use it for?

As usual, the latest Water Craft is full of interesting crumbs to feed our obsession.

Designer Paul Gartside presents the first of a series of complete plans, including offsets, for boats you can build; this time it’s a shapely double-ended 12ft  rowing boat for traditional carvel (or clinker) construction.

Fancy strip planking? Read how Nick Paull built the Canadian canoe that won him Water Craft’s special prize for the most professional-loooking home-built boat at the Beale Park Thames Boat Show.

More, Patrick Curry explains how he made hollow wooden spars for his traditional Dutch yacht, Bob Lloyd shows how to make a razee.

Pete  is still working on his Phil Bolger-designed Chebacco boat in the outdoors (brrr! – rather him than me!) and Dick Phillips has been sailing a Chebacco built by Connie Mense that many of us saw on show at Beale. (For an intheboatshed.net post on this boat click here.)

Jo Moran has been sailing another boat we saw at Beale, the electric day-sailer Cirrus and Kathy Mansfield has been to Portsoy’s Traditional Boat Festival.

Subscribe to Water Craft now – the drawings for that Gartside pulling  boat alone will make your investment worthwhile!

Strip built Peterborough canoe built by Alexander Threipland and Russell Gale at the Boatbuilding Academy, Lyme

Boat Building Academy students Alexander Threipland and Russell Gale built this strip built 16ft Peterborough canoe, and launched it along with their fellow students’ projects back in June.

Alexander and Russell built their canoe in glass-sheathed western red cedar, with wicker seats, a cherry thwart and fore and aft decks with ebony detail. Since leaving the course Alexander has started a business, Wilton Woodworks, with Will Reed, a former student and instructor whose boat was first launched at the Beale Park Thames Boat Show this year. Hopefully we’ll hear more from them in the near future.

My thanks once again to Academy principal Yvonne Green for the photos.

For more on student launches at the Boat Building Academy, click here.

Don’t miss something good – start receiving the free weekly intheboatshed.net email newsletter now!

‘One day paddling among the lilies perhaps in a stream too narrow for oars; on another spreading white sails to the sea breeze, and safely contending with the wave; now carried over obstacles, now housed in boat-house or shed, in a room of the inn, or in fact anywhere that there is room to swing the traditional cat; and again at anchor in the tide or hauled up on beach or grass, she is herself the nightly home of her crew.’

Practical Canoeing is an entertaining and thoughtful little book, and it’s great that it is available online, thanks to Craig O’Donnell.

Tiphys’ advice on dress is particularly good:

‘The dress worn afloat will naturally depend on the locality, and the nature of the work to be expected. On the Thames, etc., an ordinary boating jacket, “sweater,” and scarf, with flannel trousers or knickerbockers and a cap or straw hat, according to wind and weather will be the most appropriate, and is perhaps the most comfortable dress possible.

‘Knickerbockers are better than trousers, both on board and for wading; they should be double-seated and made without buckles, an elastic cord half-way round being used at the knee instead.

‘At sea, this dress would be conspicuous, because unusual, and ordinary yachting costume is more appropriate. If the canoeist is a “seaman” it is rather an advantage that his dress should declare the fact. Suppose, for example, one is asking for any information from local pilots or fishermen, if they take one for a “landsman” they will probably attempt to translate their remarks into “shore” language, at the total sacrifice of intelligibility. Again, in a harbour, if you have to cross the decks of any vessel to reach your craft, your appearance will excite surprise if in landsman’s attire; while, as a sailor, no one thinks anything of it.

‘The “landsman’s” dress leads to one’s receiving all sorts of unnecessary offers of assistance; one is warned and cautioned! against this and that till one is almost frightened; and one is regarded by extortionate “boatmen” as a prey specially delivered into their teeth.’

Also:

‘A duplicate working suit, with the exception perhaps of the coat, should be carried, also a shore suit carefully packed by itself in a bag or large handkerchief. If made of blue cloth or serge, it may be made to act two parts, when topped by a yachting cap it ‘has a sufficiently nautical appearance, while under an ordinary hat it does for going “inland.”‘

Speaking of canoeing, I’m reminded that I’ve been enjoying boat designer Michael Storer’s weblog about his current visit to the USA, which has included some boating through the fabulous scenery of the Colarado River. Take a look – you won’t regret it.

Don’t miss something good. Sign up below to receive the free weekly intheboatshed.net newsletter.

Water Craft is a great magazine – subscribe now

The Beale Park Boat Show, the annual Amateur Boatbuilding Competition and the true story of the near death and new life of the Cornish Crabbers company all feature in the September/October issue of Water Craft.

I should remind readers that The Most Innovative Home-Made Boat went to Chris Waite’s Octavia, an elegant and efficient stitch and glue rowing skiff that we’ve featured several times at intheboatshed.net – no doubt the Water Craft article will reveal much more.

From France there are photos of La Semaine du Golfe du Morbihan from Kathy Mansfield and Tony Langmead, and in the dark depths of his boat shed Dick Philips makes more progress on his strip-planked Nigel Irens-designed Roxane.

There’s an extra reason for taking out a sub now, by the way – for in October the magazine’s subscription prices go up!

Rivers: irritating at times, but often interesting and always beautifully photographed

I’ve always said coracles are cheeky little chappies that are just a little too fly to be trusted… Anyway I was greatly amused last night to see Griff Rhys Jones fall out of one into the River Wye on the latest episode of his beautifully-shot BBC series Rivers.

For a few moments I thought GRJ had the thing licked, but I can’t say I’m surprised he ended up in the water – the one time I tried to paddle one I found it nearly impossible.

This was the best episode of the three so far, and by far the best part was the section on two forms of salmon fishing that seem to be about to disappear, netting with lathe nets (like giant butterfly nets, but used in the water) and trapping with wicker baskets called putchers.

Both techniques are practiced only by older gentlemen, but a large part of the problem seems to be that the natural upstream spawning habitats used by salmon have been disrupted, as have the peat bogs that used to help moderate the river’s flow. GRJ’s key message in this series seems to be that councils and others are allowing commercial interests to wreck the longstanding natural functions of rivers while 96 per cent of the river network is closed, even to canoeists. I’d say the wrong activity (and the wrong people) are being banned.

If you’re in the UK, catch it on the iPlayer before it gets replaced by next Sunday’s episode.

Iain Oughtred: a life in wooden boats examines an unusual individual. Revered designer and small boat sailor Oughtred is an uncomfortable loner who has often felt at odds with many elements of his upbringing and his home country Australia, a wonderful designer’s eye and a clear sense of purpose. He’s also a man with almost incredible amount of determination and focus.

If you don’t already know Oughtred’s work, you probably should: he draws beautiful boats and his highly detailed plans have earned huge respect from those who have built them. One of a small group of designers and boatbuilders who pioneered the clinker or lapstrake approach to plywood boatbuilding during the 1970s and 80s, his designs borrow heavily from traditional craft, which he studies closely.

Yet there are some paradoxes here. Unlike other designers whose work draws from the tradition, almost all of his boats have a certain something that makes them instantly identifiable as being from his board. Another contradiction is that although Oughtred has over time drawn and re-drawn his boats with the aim of making them easier to build, few dinghy sailors building a boat for the first time feel confident enough to tackle one.

In fact, the home boatbuilders who seem most attracted to Oughtred’s work are at the most craftsman-like end of the spectrum of amateur builders. It’s certainly not always so, but these folks are quite often mainly interested in building a boat that seems to them a work of art – for some, actually sailing a lively small boat designed by a dinghy racing master is quite often a frightening prospect.

In writing Iain Oughtred: a life in wooden boats, author Nic Compton has explained much of this. He’s written a strikingly personal biography that shows clearly how Oughtred’s difficult childhood and dislike of a foreign and brash commercial culture led the boat designer to escape as far as possible from his Australian roots, becoming first very English and later very Scottish.

However, I’m less sure that he has managed to link the life to the boats themselves.

We expect biographies of composers or artists to link life events to their output – but the trick is difficult if not impossible when we’re talking about boats, and it’s perhaps harder to justify some of the public exposure Compton has included. Yet exposure is what we often ask from celebrities nowadays, and journalist Nic Compton’s instincts will all have been pulling strongly in the direction of more, not less disclosure.

Has he got the balance right? On balance I think he probably has, if only just. Reading this book, I find I’m glad to know more about this gentle man. I’m not remotely autistic, but I can identify strongly with his school life blighted by asthma and his sense of being different from other people, both of which I’ve also experienced to an extent. I’ve always respected his ability painstakingly to go on drawing more and more achingly beautiful boats, but now I know how he has struggled to keep going I have to admire him all the more. I just hope that publicising the sometimes difficult story of his life has not made the man himself uncomfortable.

Buy it or not? I say go ahead and expect to learn a lot about the wooden boat movement in general as well as an important boat designer. Iain Oughtred: a life in wooden boats

For more posts relating to Iain Oughtred’s work, click here.

Also, see 70.8% on the new Oughtred biography, together with a bundle of photos.

Sean Hartman’s skin on frame canoe

Sean Hartman found plans for a skin on frame canoe (SOF canoe) taken from an old book some time ago.

He writes: ‘I found these plans while researching your Cinderella canoe. They seem to have been taken from an old book entitled Canoes, Dinghies, and Punts: How to build a canvas canoe by E T Littlewood. One of the photos attached shows the transom hitch lashings I used for the ribbands and later the gunwales.’

Sean has reminded me that he obtained the drawings he used to build this boat from intheboatshed.net – see them at http://intheboatshed.net/2007/02/10/build-a-canvas-canoe/

This seems like a good opportunity to mention that the scans from Practical Boat Building for Amateurs by as written by D Neison and updated by Dixon Kemp I put up some time ago include another set of drawings and instructions for making a canvas canoe.

Look out for the sailing version of the Julie skiff. Click on the image for more

Don’t miss something good – sign up for the free weekly intheboatshed.net email newsletter now!

I won’t be able to make the Thames Traditional Boat Rally this weekend but I’d like to make it one day – and no doubt Julie would love what looks like a rather genteel event.

In the meantime, I’ve been enjoying this fabulous gallery of photos. I recommend you just hit the ‘play’ button at the top right of the page and watch the boats go by for a few minutes.

HBBR’s raiders on the Thames

I’m grateful to UK Home Built Boat Rally stalwart and top class lapstrake boatbuilder Chris Perkins for sending me these photos of fellow members on their raid, making their way from Lechlade to Beale Park for the Beale Park Thames Boat Show. The shots include one of Chris Partridge of Rowing for Pleasure – see if you can spot him – and one of Chris Waite in his excellent self-designed rowing skiff Octavia. See this post for more on Octavia.

The boats are all home-made (of course!) and the river is not a prime sailing area for small boats (it’s better with a tall rig), so they bravely paddled and rowed all the way. A distance of 60 miles is a significant trip if you’re not an athlete, so hats off to them, I say.

Show us how much you love us – sign up to intheboatshed.net’s free weekly email newsletter now!

Nick Paull’s Hazy Days, winner of the ‘most professional’ category of the 2009 Water Craft boatbuilding competition. It was built to Steve Killing’s Prospector Canadian canoe. Click on the photos for much larger images

Mike Wooldridge’s Puddle Duck, victor in the ‘home made boat most likely to encourage beginners’ category’. It was built to the Selway Fisher Drake sharpie plans

Chris Waite’s ingenious and effective home designed rowing skiff Octavia, winner of the ‘most innovative home made boat’ section

This year’s Water Craft magazine amateur boatbuilding competition at the Beale Park Thames Boat Show was better than ever, despite the rain. Editor Pete Greenfield’s idea of opening up the competition by offering three categories of home made boats – most professional-looking, most likely to encourage beginners and most innovative – was clearly a big hit.

Hazy Days is undeniably very smart and won a tightly contested section, but I very much enjoyed seeing Puddle Duck, which chimed nicely with my view that people should be encouraged to feel that they can build small, simple and low cost boats that they can be proud of and which are effective on the water.

However, my favourite this year was Chris’s Octavia, which must count as one of the cleverest designs I’ve seen in a long time. Yes, those scraps of ply in the plastic bag are all that was left from the three sheets of plywood he used to make the boat, but that’s only the half of it – when Chris wants to transport it, the boat divides in two to fit in the back of his car, and when reassembled the undersides of the riggers include a system of pegs that neatly hold the boat together.

Don’t miss something good – subscribe to intheboatshed.net’s weekly email newsletter now!

]]> http://intheboatshed.net/2009/06/09/water-craft-boatbuilding-competition-winners-2009/feed/ 2 http://intheboatshed.net/2009/06/04/some-boats-at-the-barton-hbbr-meet/ http://intheboatshed.net/2009/06/04/some-boats-at-the-barton-hbbr-meet/#comments Thu, 04 Jun 2009 12:44:42 +0000 Gavin Atkin http://intheboatshed.net/?p=6624

A traditional ‘Welsh woman’ style wherry burgee on a shed at Barton Turf
catches the evening sun. Click on the images for larger shots

HBBR member Wayne Oliver’s boat built to Conrad Natzio’s Oystercatcher
design and fitted with deadeyes, shrouds and other entertaining features

Chris Perkins perfect little Stangarra built to Iain Oughtred’s Stickleback plans
was deservedly very popular – here it is paddled by Ewan Ryan-Atkin and
HBBR member Peter Nobes

Tim O’Connor’s Iain Oughtred designed Acorn skiff named Ardilla

Mark Harvey sails his father’s Goat Island skiff built to plans from Michael Storer

Nearly two weeks ago now we finally met the Home Built Boat Rally folks at their annual meet at the Barton Turf Adventure Centre. The images above are just a small selection of photos – so I’m sorry if anyone’s upset at being left out!

I’ll say a little more about the Barton Centre in a moment, but first I’d like to talk about the HBBR and its members. I’ve been a member of its Yahoo Group and publicised its website and events almost since Alec Jordan of Jordan Boats first floated the idea, but life’s usual complications have prevented us from attending any of their events.

Having met the HBBR group, I’m glad to be able to report that in real life they turn out to be a jolly bunch whose members cover the spectrum that ranges from boating enthusiasts who happen to have made their own boat at one end to perfectionist boatbuilding enthusiasts who are only now getting into boating – or maybe never will. The HBBR is a broad church, but it’s also one that has fun.

Julie and I rolled up together with my two teenagers Ella and Ewan, played with the boats and took photos – and my kids enjoyed themselves so much that they want to attend again next year, even though teens are usually allergic to any group  made up mainly of blokes of their father’s age.

As I write many of the Home Built Boat Rally folks are currently making their way from Lechlade in Oxfordshire down to Pangbourne for the Beale Park Thames Boat Show. I hope the weather holds for them, and that their nights are reasonably comfortable!

On the Barton Turf Adventure Centre, I’d like to say that Ella and Ewan had a superb week’s sailing tuition on Barton Broad while we stayed in our caravan and tents on the site, and Julie and I alternately sailed and went sight-seeing. The fact that we could camp made the cost of the course affordable, and the Fishwick family who largely run the place couldn’t have been more kind and helpful during our stay.

As well as sailing tuition, the Barton Centre caters for groups involved in boating, ecology and nature study and it’s difficult to imagine a better place for these activities. It’s certainly an excellent base for small boat sailing. Click here to get to the BTAC website.

Two happy teens: Ewan and Ella Ryan Atkin at the end of a busy
week’s sailing tuition at Barton Turf Adventure Centre

Don’t miss something good – subscribe to our weekly email newsletter now!

Probably Phil Bolger’s most frequently built boat, the Gloucester Light Dory is
a plywood classic that will continue to be built, re-worked and adapted for
many years to come. Writing of its popularity, he joked that it would one day
secure his entry into heaven. Photo by Susan Davis, taken from the Wikimedia

After an idyllic few days on the Norfolk Broads we’ve just returned home to the sad news that the designer Phil Bolger has ended his own life at the age of 81.

I’d like to add my tribute to the many obituaries appearing around the World Wide Web.

Phil Bolger was a man who inspired many people by alternately drawing beautiful boats, utilitarian boats, and utterly original boats that could only have come from the drawing board of someone who had a special gift for ruthlessly teasing out the logic of a design brief.

He was also a superb communicator – in his articles and books he would often excite readers about the ideas behind his designs as much as the designs themselves, and this won him many, many fans.

Bolger was often a controversial designer and frequently misunderstood by those who could not see past the boxy appearance of some of his more easily built designs. However, I think it should be clear to all that he was touched by greatness.

I never met him, but have copies of most of his many fascinating books, which I’ve read and read again many times. I’ll miss him and his writing, as will countless others, but I’m confident his influence and legacy of boat designs will live on for a very long time to come.

For more intheboatshed.net posts on Phil Bolger and his boat designs click here.

Don’t miss something good – subscribe for free and start receiving the weekly intheboatshed.net newsletter now!

Thames barges on the Blackwater – one of the first photos
to appear at intheboatshed.net

It feels a little funny when I think of it, but some time in the next two or three days in the boatshed.net will rack up its first half million hits.

Those with long memories will recall that this weblog began in a very small way at the end of 2006, and benefited early on from the support of various weblogs and online magazines, most notably Chuck Leinweber’s Duckworks Magazine and Tim Shaw’s Chineblog.

Ben Crawshaw’s wonderful The Invisible Workshop followed as did Chris Partridge’s Rowing for Pleasure, and so did a host more I won’t mention just now because if I do this post will become too huge for words.

We’re now all part of a community of interconnecting weblogs and online magazines, and I’m grateful to all of them both for their assistance in helping readers find their way here, and for the entertainment and interest they have given us in our household. If you come to this site and happen to land on this post, therefore, I’d like to suggest you take a little time to explore the sites and weblogs, as well as the rest of the intheboatshed.net blogroll.

But I have another request: please send me pictures and stories that you’d like to share! We’re particularly interested in old boats, traditionally built boats whether old or new, in boats that bear the influences of the past, in the history and culture of boating, in influential individuals and in alternative ways of enjoying boating rooted in the past. It doesn’t matter whether you’re a proud owner or not, or a boat builder or other boat related craftsman, or even if you simply have something interesting to sell. And the occasional story about a boat-related shed doesn’t go amiss either!

Finally, I’d like to pay tribute to my family and wife Julie, who has shown immense understanding and enthusiasm over a long period. I know that I’ve been very lucky to have their support and I hope they feel the result justifies the effort and time that goes into the inthboatshed.net project.

Reach me either at gmatkin@gmail.com or by using the intheboatshed.net contact page, which you can get to using the page tab above the title line.

Don’t miss something good – subscribe to intheboatshed’s weekly email newsletter now!

The Dinghy Cruising Association’s boats assembled at Beale, with
Al Law’s Paradox Little Jim in the foreground

A highlight of the Beale Park Boat Show last year was meeting Al Law and seeing his home-built Matt Layden-designed Paradox named Little Jim close up.

Yes, this little 14-footer is the boat he sailed to the Scillies and back in company with another Paradox owner, Bill Serjeant. Some say the heavy displacement Paradox is a small sharpie, while others say it can’t be  a sharpie because it’s under 19ft. Both views are correct, of course, in the mad logic of boat nomenclature.

I say that it has an interesting n some ways it’s more like a model of a small modern ship.But whatever one calls them, they’re certainly interesting, and perhaps of particular interest to someone who has come to realise their family is unlikely to sail with them, and finds sailing a small, easily managed boat alone an agreeable alternative. See the study plans here and Al’s record of building and sailing his boat here. And if you’re wondering how a boat like this can sail, check this video and also this one of Bill’s boat Faith. Bill, I should add, had sailed his little boat right round the coast from Essex: see earlier posts.

Little Jim sailing at Beale Park

Don’t miss something good – subscribe to intheboatshed.net’s weekly bulletin

Sailing canoe Sara is for sale

I’d like to draw attention to a crop of interesting posts over at the Albert Strange Association website.

The first is a rather sad announcement but represents a great opportunity for someone. Due to poor health, ASA technical secretary Rick Powell has reluctantly decided to sell his 15ft, 4ft 6in beam sailing canoe Sara, which he designed and built a few years ago. She’s said to be a modern take on George Holmes’ Ethel concept; her construction involves ply-epoxy planking with strip-planked curved bilges, oak trim, hollow mast and boom, and built-in buoyancy. She has lots of stainless steel fittings Ronstan fittings, and comes complete with cover and road trailer.

ASA site editor Dick Wynne says she has been sailed just four times, and that her performance matches her good looks. She’s on the market at what seems to me to be a very reasonable price.  See more here.

The ASA site is always well worth a visit, but at the moment there are some corking stories about some legendary boats, including Eel,  Betty (the Strange boat that won the 1927 Fastnet Race), and Sea Harmony.

PS Dick tells me he’s very concerned about the loss of mud from the River Thames, which has led him to moor his boat away from its usual spot at the Greenwich Yacht Club’s moorings. There’s an interesting Wikipedia entry on the subject.

Do you have an interesting boat for sale? Please tell us about her: gmatkin@gmail.com .

Don’t miss something good. Subscribe for the free weekly intheboatshed email newsletter!