It began with a neglected wreck on the shore. I’ll let Ian tell his story.
‘A pile of broken boats, uncared for and abandoned on the beach is never a happy sight for those of us that enjoy taking to the water, but then, when one is in the right frame of mind, it does present an opportunity…
‘My friend Dean needed a new fishing boat. At 6ft5in tall, the aluminium saucer that he was taking out to sea was, to say the least, a bit risky, especially when bins full of nets were involved. He told me that he was looking for a new boat, something longer with a lot more freeboard but his search had been fruitless, basically because of budgetary restrictions.
‘So when a pile of three boats presented themselves on Castletown slipway awaiting removal by the council to go to landfill the opportunity had to be taken.
‘The largest was an 11ft purpose-built harbour fishing boat built by Clarkes of Castletown, probably in the 1970/80s. The keel was smashed at the stern end and the woodwork was completely shot, but the hull was salvageable.
‘Dean is an incredibly generous person. He feeds the street with the excess fish he catches, freely giving away the fruits of his labour but fishing is his hobby, not his income, so I restored the boat for free in return for past and future suppers.
‘Because it wasn’t a paid job it was an as and when and was done over the course of a year. If it had been done in a clear workshop and hit in one go it would have taken a few days. Also, a lot of the job was done on the beach and all of it outside which slows things down.
‘GRP isn’t my favourite material to work with but I would rather breathe life into an old GRP boat than consign it to landfill, for ecological reasons every bit as much as practical reasons.
‘Dean reckons the bill for materials and bits was about £800 – but £800 isn’t bad for what is now effectively a new boat that will last many years.
‘This was a belt and braces job. We used American white oak for all the woodwork and everything was ‘over-engineered’ to produce a very solid boat that will see out his fishing days.
‘I would definitely recommend taking this approach. It does mean that you can own a decent boat at reduced cost and help the environment by not sending it to landfill.
‘It is a perfectly reasonable job for someone with some woodworking skills, although if you don’t have a good knowledge of fibreglass boats I would recommend an inspection by a surveyor before it is used.
‘You’re going to put your life in this vessel so you have to make sure that it is safe. If the hull is badly damaged – holes, fractured – it may not be a good idea without good laminating skills to try to restore it – you don’t want the thing breaking up on you with 150’ of the deep blue underneath you! Having said that, one can argue that nothing is irreparable. It may even be worth repairing a damaged hull and fairing it to use as a plug for a mould to lay up new boats.
‘Another time on a GRP boat like this I think I would prefer to laminate the gunwales and inwales. We used much chunkier material than the originals, and laminating would have made it easier and quicker to fit.’
So what are Dean and Ian doing with the little boat? ‘We fish from it and have adventures, of course!’